Quote Originally Posted by drnick View Post
I must be doing something wrong. I'm on the 1053 bios with ultra high LLC. When I'm pushing my 2500k into the 4.8 to 5.0 ghz range, I can achieve stability using manual voltage only. I would like to use the offset for lower idle voltage. However, when I set the offset to match the vcore I observe under load with a manual vcore setting of a a given overclock speed, the system becomes terribly unstable (bluescreens galore). I could try adding more offset voltage, but then the vcore under load becomes higher than I would need for stability with a manual vcore setting.
I am experiencing the same behavior with offset voltage compared to manual voltage.