Nice template

One thing I have noticed with my 2600K is the IMC is a lot weaker than my 2500K. My 2600K would not do over 5.1GHz 8.9.8 / 8.10.8 it needs to be 9.10.9 to pass Linx where as my 2500K can bench 6.9.6 no problem & 7.9.7 is LinX stable with enough voltage..... maybe try 8.10.8 with everything else in mem auto & std performance enhance.

15 mins short test 1 hour long Prime 25.11 custom 4096-4096 with as much ram as you can spare is a decent test to check ram timings/voltages etc. I also find my 2600K likes up to 1.18 qpi/vtt depending on how high & tight you go with the RAM. My 2500K likes only 0.88 qpi/vtt to do 2133 8.9.8 @ 5GHz!!!

BTW if you type (remove the full stops)

[co.de]

some text/template etc

[/co.de]

It will look like this & save some forum space if you are posting a full template.

Code:
Advanced Memory Settings:

System Memory Multiplier (SPD) ........................[ 18.66
Performance Enhance ...................................[ Turbo
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving ..................................[ Auto
Rank Interleaving .....................................[ Auto

Channel A Timing Settings:

##Channel A Standard Timing Control##

CAS Latency Time ......................................[ 7
tRCD ..................................................[ 9
tRP .................................................. .[ 7
tRAS ..................................................[ 24
tRC .................................................. .[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR .................................................. .[ Auto
tWTP ..................................................[ Auto
tWL .................................................. .[ Auto
tRFC ..................................................[ 74
tRTP ..................................................[ 7
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ 1
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto
Advanced Memory Settings:

System Memory Multiplier (SPD) ........................[ 18.66
Performance Enhance ...................................[ Turbo
DRAM Timing Selectable (SPD) ..........................[ Quick
Channel Interleaving ..................................[ Auto
Rank Interleaving .....................................[ Auto

Channel A Timing Settings:

##Channel A Standard Timing Control##

CAS Latency Time ......................................[ 7
tRCD ..................................................[ 9
tRP .................................................. .[ 7
tRAS ..................................................[ 24
tRC .................................................. .[ Auto
tRRD ..................................................[ Auto
tWTR ..................................................[ Auto
tWR .................................................. .[ Auto
tWTP ..................................................[ Auto
tWL .................................................. .[ Auto
tRFC ..................................................[ 74
tRTP ..................................................[ 7
tFAW ..................................................[ Auto
Command Rate (CMD) ....................................[ 1
IO Latency ............................................[ Auto
Round Trip Latency ....................................[ Auto