Quote Originally Posted by Waterlogged View Post
Not sure I correctly understand the first question. The 4 plugs on the front and the one on the top are the only places fittings will fit. Either plug on the ring can be use for an inlet (or both if you'd like). The 2 on the pump top itself, the left one is pump outlet and the right one is pump inlet if you have a requirement for a really low profile pump and don't use the res. It kind of hurts pump performance using that inlet so I don't really recommend it's use to most ppl. The top plug is mostly used for filling the res but there have been ppl that have used that location as a inlet.

The only other place I know that carries all of it is Koolance themselves.

http://www.koolance.com/water-coolin...p?cPath=57_112

The 200mm tube is actually almost twice as much as what P-PCs is charging for it. I think that may be because they (P-PCs) appear to be clearing out the 60mm diameter stuff in favor of the newer 80mm diameter. I personally don't understand the reasoning behind the 80mm stuff because it's a lot bigger than the pump top and won't let you mount the pump with the bracket.
Boy do I feel dumb. The 'outlet' on the pump when I looked at the picture turns out to be the lock screw knob for the ruler on the square... doh!