***Official***Z68X/P67A-UD7 Club/Discussion/Info**

[Hooti3]

Have you tried manually setting the PLL voltage slightly higher?

I've also found more stability at 1866 when increasing QPI/VTT voltage to 1.080v

Here are things I have tried.

Increased IMC to 1.1V
Increased VTT to 1.2V
Increased DRam up to 1.7V
Increased Vcore up to 1.45V

I've tried multiple or all of those together and it wont boot.

I ran a quick memtest @ 1866Mhz.

I escaped out of the memtest, the board rebooted and it said the overclock had failed.

It then went into a boot loop and eventually came back at stock settings.

I have tried booting with one stick @ 1866mhz for 5Ghz, it got into windows and then BSOD 124.

I really don't know what else to try.

It's giving me the F&*king S&*Ts!!

One of the worst boards I have ever used in terms of overclocking.

It just seems so primitive in it's adaptation.

I know this chip is better than 50x Multi. I just can't find the reason it wont go further. If it's the ram or the board itself.

@Dino - I'm happy to send you the ram if you want so you can have a play around with them.

BTW...Link to Ram - http://www.techwarelabs.com/patriot-...mance-ram-kit/