Quote Originally Posted by bingo13 View Post
1. You need to keep EIST, C-States, and Speedstep enabled to ensure turbo/multi modes work correctly.
Thank you for your support, but nothing happend :/
Here are screens from BIOS with actuall situation
http://img529.imageshack.us/i/110110171817.jpg/
http://img84.imageshack.us/i/110110171838.jpg/
http://img98.imageshack.us/i/110110171831.jpg/
For the last screen - even with Maxium Power Enable it's all the same - ratio is 38, but BCLK is 89,5, which gives us 3400 :/

Quote Originally Posted by bingo13 View Post
2. For best clocking and highest multis, you need to set S3 to disable, ensure Internal PLL Overvoltage is enabled, and depending on cooling, set your voltages accordingly. For LN2 with a good chip, CPU Core Voltage to 1.6V~1.7V, PLL to 2.1V, play with the SKEWs for fine tuning, keep temps between -80C~-100C, on most D2 chips this should get you 5.8 (58x multi), on good air or water, keep CPU voltages around 1.45V~1.5V (outer limit), PLL to 1.9V, play with the SKEWs, and you should see anywhere from 5.0~5.2, with the best chips hitting 5.4.
For best clocking and highest multis, you need to set S3 to disable itd.
I would really like to solve this BCLK/mutliplier problem, then I can think about some records and 5 GHz