X48 Rampage Formula Preview.

[OLDcomer]

If you pass Prime95 x64 small and blend and LinX fails then you've better improve your cooling.

[Alien Grey]

If you pass Prime95 x64 small and blend and LinX fails then you've better improve your cooling.

I don't think I've got a cooling problem.


Could you post a screenshot showing the Chipset information from your Giga board? I would like to see the memory timings.

[OLDcomer]

I don't think I've got a cooling problem.


Could you post a screenshot showing the Chipset information from your Giga board? I would like to see the memory timings.

Make a choice and I'll tell you what everest shows:

1. 500fsb



2. 512 fsb



3. 523fsb

I think I've also got 523 fsb picture but with PL9 and strap 400

[Alien Grey]

Make a choice and I'll tell you what everest shows:

Let's start with FSB 500MHz.


@Korgan

FSB 500MHz is next on my list and I hope to have it stable for at least 20 passes in LinX.



I guess I was wrong when I said that LinX failed because of to low CPU Voltage.

But I was right when I said that now she's as stable at FSB 469MHz as she was at FSB 450MHz with any other BIOS.

It isn't the CPU Voltage that was the problem but the CPU Voltage Reference and going back to 0.63X gives me this:

[OLDcomer]

Let's start with FSB 500MHz.
...

[Alien Grey]

Thanks. It's going to be very useful.

[Alien Grey]

@OLDcomer

There's one timing that I can't find on the EVEREST screenshot. The timing Write Recovery Time. Maybe you can find that one in the BIOS.

MCH Read ODT is also different and can't be changed in the BIOS.

ASUS -> 8T
Gigabyte -> 11T


Edit:

I left Write Recovery Time at 12T in the BIOS and I think that it should be right because EVEREST has it at 18T for both.