This are my settings for 24/7/365/3 crunching with 2x2GB (look at my signature). Vdroop is horrible on this board. The actual voltage under load is more like 1.51 V (VID:1.325). Temps for crunching einstein@home are at 60°C with aircooling.
PCIeClk could stay at 100. The voltages are quite the same for 8x450 but I havenīt seen any advantage using a higher FSB.
I wouldnīt care about linx, because the power circuit is quite lame on the board (4 phases). So everythime I start linx the pc shuts down. I use prime95 blend for 1h. When itīs fine then I donīt get any errors while crunching.
Reply With Quote
Bookmarks