Welcome to XS

Very nice thread, good info, effort well done.

If you would be kind enough to post some info on other subtimings, Im having trouble getting these sticks to run at 2000mhz, maybe with some input from your subtimings i can get them to work, Thanks.

E.g here is a cut and paste from aida/everest under motherboard/chipset/Northbridge AMD K10 IMC

Memory Controller
Type Dual Channel (128-bit)
Active Mode Dual Channel (128-bit) - Unganged

Memory Timings
CAS Latency (CL) 8T
RAS To CAS Delay (tRCD) 8T
RAS Precharge (tRP) 8T
RAS Active Time (tRAS) 26T
Row Cycle Time (tRC) 27T
Command Rate (CR) 1T
RAS To RAS Delay (tRRD) 4T
Write Recovery Time (tWR) 8T
Write To Read Delay (tWTR) 4T
Read To Precharge Delay (tRTP) 4T
Four Activate Window Delay (tFAW) 18T
Write CAS Latency (tWCL) 6T
Refresh Period (tREF) 7.8 us
DRAM Drive Strength 1.0x
DRAM Data Drive Strength 1.0x
Clock Drive Strength 1.5x
CKE Drive Strength 1.5x
Idle Cycle Limit 16

Error Correction
ECC Supported, Disabled
ChipKill ECC Supported, Disabled
RAID Not Supported
DRAM Scrub Rate Disabled
L1 Data Cache Scrub Rate Disabled
L2 Cache Scrub Rate Disabled
L3 Cache Scrub Rate Disabled