Computer Case & Workstation Gallery

**bikebuilderdude** · 12-06-2010, 05:29 PM

Nice, but rember this:

Four Simple Rules:

1) No larger than 1280 x 1024 pixel (but 1024 x 768 pixel is preferred),
2) The limit on the number of pictures is 4 per case (if you want to post more than 4 pictures, use thumbnails or post links without using the IMG tags),
3) Do not quote images,
4) Finished cases only, no worklogs.

**game_matter** · 12-07-2010, 12:51 AM

That monster's bigger than I thought

**JaccoW** · 12-07-2010, 02:05 AM

Holy crap, I too thought "mmh nice case", then I saw the last picture. :O
It's a mansize maneater.

**Pupo** · 12-07-2010, 03:17 AM

HTPC

AMD BE-2350
Gigabyte MA78GM-S2H
2Gb DDR2 Kingston
250Gb Seagate single plate
Hyper HPU-4S525 modded

A+ CS-GL3
ATI Remote Wonder

Now waiting for Scythe Mini Ninja and AC 120mm PWM fan to arrive

**Nikol@** · 12-08-2010, 06:25 AM

Good job Pupo.
Is it loud too much?

**Pupo** · 12-08-2010, 01:42 PM

Originally Posted by Nikol@

Good job Pupo.
Is it loud too much?

Not at all

I hope it will be alomst without any noise when Scythe arrive to me

**ragnarok95** · 12-09-2010, 04:40 AM

Originally Posted by guilleguillaume

Nice choice of Keyboard.

Blues, Browns or black? :P

Its brown

**Bobsama** · 12-09-2010, 08:17 PM

The chassis isn't that dirty anymore, but that's a slightly newer picture (I think?) of the computer at its honorary place under my desk. The marks are flash anomalies. That said, I'm not entirely happy with the chassis as, while it's more solid than the old chassis, it doesn't fit together like I'd expect a Lian-Li to. You can see gray steel at the edges of the side panels (that's the main chassis--not the side panel) and the plastic work is also poorly done--with a millimeter of overhang.

**s0lid** · 12-10-2010, 07:51 AM

My current setup:

Didn't bother too much cable management etc.

Just to show how tubing and fans cables are connected.

Yes that's phobyas 1080mm rad! or 9x120mm :]

**lowfat** · 12-10-2010, 12:08 PM

As it stands currently.

**ragnarok95** · 12-10-2010, 10:21 PM

Why is there a need for a exhaust fan there?

**lowfat** · 12-10-2010, 10:22 PM

Originally Posted by ragnarok95

Why is there a need for a exhaust fan there?

Otherwise I don't have any airflow over the mainboard at all.

**Sl@yerTech** · 12-11-2010, 07:01 AM

**brayway** · 12-11-2010, 07:06 AM

Very Clean, i like it

Good choice on the mouse, i love my Mamba

**Sl@yerTech** · 12-11-2010, 07:41 AM

Originally Posted by brayway

Very Clean, i like it

Good choice on the mouse, i love my Mamba

Thanks!

**MarkC** · 12-11-2010, 07:51 AM

A Rat Asus Vento

**eskamobob1** · 12-11-2010, 06:51 PM

for some reason the top mounted PSU is realy disorientating in the second pic

lol... i like it though

**brayway** · 12-11-2010, 09:22 PM

I see what you mean, i think it is because there is no 5.1/4" drive bays as well.

**eskamobob1** · 12-12-2010, 06:49 PM

probly

its a good pic though

**transit921** · 12-15-2010, 10:14 PM

Originally Posted by spotswood

A commissioned oak and aluminum case.

Form factor: HPTX (EVGA's SR-2)
Dimensions: 46 x 27 x 35 inches (HxWxD)
Weight: 161 pounds
Materials: Solid red oak and oak veneer plywood, .10-inch aluminum sheet, .125-inch angle, all stainless steel fasteners
Finish: black wood stain with wipe-on polyurethane, black powder coating
Internal drive bays: 37 x 5.25-inch
PSUs: 2x
Two custom radiator mounting brackets to hold 4 x 140x4 radiators
140mm case fans

i seen a lot of cases,this is by far my fav,should make a air cooling one,water cooling is too much clutter,deff the best i seen,nothing comes close to that

**Etihtsarom** · 12-16-2010, 07:49 AM

Originally Posted by spotswood

A commissioned oak and aluminum case.

This is my favorite case, Oh look, it comes with a decorative little midget.

Installation:
1. Rent crane
2. Place midget aside
3. Remove roof of house.

When I saw the work log some time ago, I thought this case was going to be too big for comfort, glad to see I was wrong.