So Metro 2033 was 10 bucks on steam today so I picked it up for some benchmarking. Here are the results. SLI'ed EVGA GTX 580s Superclocked used with the GPU-Z /GTX580OCP command
Everything setting wise was set to max @ 1920 X 1200
Stock speeds 772 Core 2025 Memory
Overclocked 900 Core 2025 Memory 1.138V
Overclocked 900 Core 2200 Memory 1.138V
Interesting results. This is fun!
Last edited by hetsaq; 12-04-2010 at 10:18 AM.
Asus Rampage IV X79 Extreme 1305
Intel Core i7-3930K Processor @ 4.8GHZ 1.45V
G.Skill Ripjaw 1866MHZ 4X4GB 9-10-9-28
EVGA SC GTX 580 SLI 880/2200
Corsair H100
Coolermaster HAF932
Corsair 1000W HX Power Supply
Thanks for the Metro 2033 test run! And the developers claimed it will use all features of your hardware yet the min and average is still super low.
I think its another next gen engine game waiting for next gen hardware. Only now Stalker and Crysis are able to run near 60 FPS with max settings on a single card!
I did not use water blockOriginally Posted by Systemlord
The settings image doesn't seem to want to work anymore, I will upload it again when I get home. And you're welcome!
Asus Rampage IV X79 Extreme 1305
Intel Core i7-3930K Processor @ 4.8GHZ 1.45V
G.Skill Ripjaw 1866MHZ 4X4GB 9-10-9-28
EVGA SC GTX 580 SLI 880/2200
Corsair H100
Coolermaster HAF932
Corsair 1000W HX Power Supply
@hetsaq - nice
since hetsaq posted benchmarks of metro 2033.. last week i was thinking of doing couple/few vids of metro 2033+fraps+max settings@1080p and whatever other requested game.. but didnt have the time.. maybe later today if i got time.. youd see my 4.8ghz 980x sli 580 all air cooled system in action
if you guys would like to view such vids let me know
edited tri sli 580 out since i dont have proper 3way sli psu but heck ill include tri sli 580 as well
Last edited by NapalmV5; 12-01-2010 at 04:34 AM.
Napalm,
Please do run your great tests with Metro! I want to see how cpu limited Metro is with your setup!
metro 2033
http://www.youtube.com/watch?v=JCr4MJgXows
Last edited by NapalmV5; 12-05-2010 at 02:18 PM.
lost planet 2
http://www.youtube.com/watch?v=q1MsdM_wpQs
looking good!
_________________
Nice videos sir.
Asus Rampage IV X79 Extreme 1305
Intel Core i7-3930K Processor @ 4.8GHZ 1.45V
G.Skill Ripjaw 1866MHZ 4X4GB 9-10-9-28
EVGA SC GTX 580 SLI 880/2200
Corsair H100
Coolermaster HAF932
Corsair 1000W HX Power Supply
how does metro 2033 compare to other setups/to yours @ fraps ?
thanx cowie hetsaq i appreciate the response
have a great weekend
3dm11:d
265.90 kill combined test results or is it Sli setup?
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
@pinto sli setup
if you are on sli setup and 265.90 drivers just compare graphics tests 1-4
everything else all the scores physics test combined test are all outta whack
Where can i se the "vid" on my 2 gigabyte 580?
Yes I am noob
Voltage
______
Sometimes, it's not your time. Sometimes, you have to make it your time. Sometimes, it can ONLY be your time.
Where can i se the "vid" on my 2 gigabyte 580?
Yes I am nooblol welcome mr nizzenVoltage
[1.000v] nice vidder
either way should be great clockers
after going back to dec 7 263.09 (37.xx fps physics) then back to 265.90 looks like graphics scores are fine.. linear.. i thought i saw 11xxx graphics score @ 263.09 but thats the physics score.. just the combined scores for sli setups needs fix
as for the graphics tests sli scaling is pretty awesome.. mirror to sli scaling @ metro 2033
Last edited by NapalmV5; 12-07-2010 at 11:04 PM.
I got 2 Palit 580s installed, the stock vid is 1000mv. I can only get to 850core (memory not touched) at 1100mv, anything higher and it crashes Heaven 2.1. Any advice? This is in a case, stock cooling, with a 1200rpm 140mm fan blowing in from the side panel, I'm after safe 24/7 stuff btw.
.
3D11 works now with 580 Sli
i7 3960X@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC19200C8, Corsair force GT 240go, 2XGTX Titan, MM Ascension, Seasonic X-serie Gold 1250W, Watercooling
i7 3930K@5ghz, Asus Rampage IV Extreme, 8gb Gskill RipjawsZ PC17000C9, OCZ Vertex 3 120go, GTX670 DCU2 Top, MM Pinnacle, Corsair AX850, Watercooling
Just tested my MSI card (VID 1.025V) and it's horrible (stock cooling). 900 is bench stable......3D03 will run at 925MHz....but no more
Will test on stock water soon
Will test on LN2 in a month or so
[CENTER]The post counter is not an intelligence meter!
MAX11L - "It's like a console...with the suck turned down and the awesome turned up" -tet5uo
Heat Team IRONMODS
Just tested my MSI card (VID 1.025V) and it's horrible (stock cooling). 900 is bench stable......3D03 will run at 925MHz....but no more
Will test on stock water soon
Will test on LN2 in a month or so
I'm in the same boat. My vid is 1.050v, and between 925-935 is where its stable. These gpus don't like going over 75-80c at these speeds it seems (atleast for me). Water I guess is the way to go.
Gaming rig
Mountain mods Plateau-18 -- Core i7 980x 4ghz -- Msi big bang x-power -- 6gb Mushkin redline 998691 ddr3 1600 (6-7-6-18-1T) -- Gigabyte GTX580SO (900/1800/1100) -- Win7 64bit pro
Heatware
you have to go higher than 1.100v+85% fan for 900+
you have to touch memory (1100-1150mhz) if you want higher performance higher core voltage helps with that too
~1.125v 900/1800/2200 safe 24/7 stuff
then again "safe" is in the eye of the beholder
good luck!
Posting Permissions
Reply With Quote
Bookmarks