XS HWBot Team

[trans am]

UNcle steve kicking ass! Steve we need the almighty celeron 356 if we're gonna take this. I'm looking on ebay. I knew I shoulda never sold that rampage formula! I still have a p5k3 dlx. steve does your board have 2x16x? Looking back now I went about this contest the wrong way. I hastily went on newegg and found the only single core 775 chip 430 and with a multi of 9. that was retarded on my part. In retrospect ebay is the answ. screw the amd 140-145. that chip tops off at 5.6-6ghz if lucky and you would need the biostar ddr2 board Chew has to hit any decent HT at 400 or above. the ddr3 amd boards cant do that 400. he explained it to me when I benched with him a couple weeks ago. he's right. if you look at the amd dudes on ddr3 boards they can only hit those clocks with the Black cpus with the unlocked multis on ddr3. If you want to take this thing on ddr3 on single core then it has to be cedar mill and x48 or similar. Think about it. If I had a x48 board that has true x16x x16 slots I could use the lsi 9260 with the fastpath key and 3x 50gb vertex2 in raid0 and run that off the 2nd x16 slot. get a decent 356 cedarmill on ln2 and we would have this whole damn thing in no time. FACK! I wonder if our brother Paul (computurd) has any of his old 775 crap. if I remember correctly he had the WS and a bunch of other crap.

I know its been a while dudes but take a look at the single core king.

http://hwbot.org/hardware/processor/...tab=2drankings

steve you are one multi up from what I had with the 430 and at a measly 4.300 @ 1.9v on your cascade. wouldnt it be easier with x25 multi? you get the picture...
we went about this thing all wrong.

any xs dudes with old cedar mills get your asses in here!

THis pc mark stage is simple:
all you need to win this is some ln2,
a cedar mill 356 or similar,
some decent ddr3,
a board with x16 x 16 or a x16 and x8 slot,
a lsi 9260-4i/8i or steves ram drive
and a 5850 or higher,
some beer.