Computer Case & Workstation Gallery

[vengance_01]

You guys are crazy with your multi-monitor setups. Are those 24"s?

[PlatoonSgtElias]

Finally got all main parts watercooled






Before:

After:


Before with the fan, chipset temps got to 65-70c IDLE!!!!! srsly cant ASUS make a GOOD stock heatsink for their extreme boards?:

Before without the fan, temps got to 85-90c IDLE!!! I mean wtf, the thermal paste i replaced with MX2, temps got sooo hott... INSANE. ASUS should friggin start making good chipset coolers like Gigabyte.

[Kingcarcas]

I'm trying to figure out what's going on in each screen.......

[pogiman]

Spending $1000 on a CPU is something I will never do.


Just these. But I didn't have the power supply in. And it isn't a very good sleeving job. The Revolution 85+ is a horrible PSU to sleeve. And as soon as I finish resleeving a couple of other power supplies this one will get redone as well.

Nice! That must cost you an arm and a leg for that SSD alone

[r0lfi]

You guys are crazy with your multi-monitor setups. Are those 24"s?

Yes 3x 24 and 1x 19 inch screen.

[rubber5]

the thing is what the gpu card setup i can only see 1 bridge conector on the cards so is it 3way x-fire or something i dont know how the radions work with multy gpu's or is it sli with seperate physx

sweet rig by the way cinda want to water cool my rig dont have the confidence to do it

[pcaddict]

3x GTX 460 for folding (F@H I think).

[lowfat]

Nice! That must cost you an arm and a leg for that SSD alone

Indeed it did cost me quite a bit of money.

the thing is what the gpu card setup i can only see 1 bridge conector on the cards so is it 3way x-fire or something i dont know how the radions work with multy gpu's or is it sli with seperate physx

sweet rig by the way cinda want to water cool my rig dont have the confidence to do it

pcaddict is correct. It is firstly used for folding@home and gaming secondly.

[rubber5]

Indeed it did cost me quite a bit of money.


pcaddict is correct. It is firstly used for folding@home and gaming secondly.

the thing is how is the pc running the 3 cards i thught you had to have a sli brige across all the cards to use them properly

[pheonix991]

the thing is how is the pc running the 3 cards i thught you had to have a sli brige across all the cards to use them properly

Probably 3 to do the rendering, 1 for physx.

[lowfat]

the thing is how is the pc running the 3 cards i thught you had to have a sli brige across all the cards to use them properly

I don't game with all three. Just the first two do 3D. The other one just runs folding@home while gaming still.

[rubber5]

I don't game with all three. Just the first two do 3D. The other one just runs folding@home while gaming still.

cool i did not know you can do that
it just shows you that you can lern something new everyday

[pogiman]

cool i did not know you can do that
it just shows you that you can lern something new everyday

I didnt know that either. Now you can truly get F@H 24/7!

[rubber5]

just wondering is there a really good 3rd party cooler for the gtx 470
i had a thermalright cooler for my old gtx 280 but after i fitted it the memory got so hot the screen wold go brown after i put the stock cooler on about 2 weeks later the memory went down
i reall dont want that to happen again

my 2x 470 can hit mid 90s under gaming at 100% fan and i dont kno what to do

any ideas peapole

[pheonix991]

my 2x 470 can hit mid 90s under gaming at 100% fan and i dont kno what to do

any ideas peapole

Fix your case cooling? Don't overclock so much?

[lkiller123]

my 2x 470 can hit mid 90s under gaming at 100% fan and i dont kno what to do

any ideas peapole

That is very odd. You have the HAF X which should offer more than enough cooling for even 3 GTX470s..

Did you overvolt it of some sort?

Anyways, this will be a good aftermarket cooler for the Fermis.

[rubber5]

Fix your case cooling? Don't overclock so much?

my cards are at stock and i have the coolermaster haf-x case like lkiller123 sead so i know thair is plenty of air flow i just dont know what to do
no overvolting i dont even touch them at all with settings

[Fredz77]

My new grafics, ecs gtx460 black. Now, all fans powered by artic cooler




Uploaded with ImageShack.us





Uploaded with ImageShack.us

[lkiller123]

my cards are at stock and i have the coolermaster haf-x case like lkiller123 sead so i know thair is plenty of air flow i just dont know what to do
no overvolting i dont even touch them at all with settings

Both at the same temps? Are you sure they are at 100% speed?

You might consider RMAing them.

[rubber5]

Both at the same temps? Are you sure they are at 100% speed?

You might consider RMAing them.

i took the heat sink off and relaced the tim with artic silver 5
when im gaming the fans are about 60-70% and the temps hover about 80-88c
but thay are no ware near as loud as thay were
is the cards going to be safe at these temps now do you think

i am thinking of watercooling
but i dont know what sise rad i will need for 2x gtx470 (no overclocking) and a
i7 920 @3.8ghz
i know peapole say go for 2 loops but i priced it up for a single loop and its going to cost £420

ps i have the haf-x case from coolermaster and i can fit a 120.3 rad at the top and a 120.1 at the back
so i can technicly fit a quad rad im my case will that be enugh
(thats the price for the setup is 120.1 rad 120.3 rad 2xblocks for the gpu's
cpu block and waterpump+sump and all the fittings and piping all of it from scan computers)
its alot of money but is it really worth it so shal i go for it or not

[Kingcarcas]

FRedzzzz can we get a pic at night with the cathode turned on?? THat's very similar to what i want, i'm going to sleeve everything white and black, already removed the yellow Corsair sticker

Already have the 120MM black and white fan, just waiting for Sandy BRidge to get a bigger cooler that will fit with it.

[Fredz77]

FRedzzzz can we get a pic at night with the cathode turned on?? THat's very similar to what i want, i'm going to sleeve everything white and black, already removed the yellow Corsair sticker

Already have the 120MM black and white fan, just waiting for Sandy BRidge to get a bigger cooler that will fit with it.

Yes, this my old system within gtx 285



Uploaded with ImageShack.us

[s0lid]

Modded Lianli PC-A06B with 6 hdd slots for my server



Nothing really fancy here. Had to remove the "light" from the front panel of the case to impove airflow a little.

[puunakki]

Wicked sick

[chickenit]

New case