MMM
Page 95 of 217 FirstFirst ... 458592939495969798105145195 ... LastLast
Results 2,351 to 2,375 of 5414

Thread: XS HWBot Team

  1. #2351
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Going out to get 55L of LN2 for the 980x 3003B475...
    Wish me luck!
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  2. #2352
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    Quote Originally Posted by Linuxfan View Post
    Going out to get 55L of LN2 for the 980x 3003B475...
    Wish me luck!
    Good luck!


    Many nice scores have been posted today, especially Linuxfan has been very busy! Good work everyone!


    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  3. #2353
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    LN2 is here are waiting. Prepping OSes and insulating in the morning then BENCHING!
    Thanks for the update Daniel.
    The laptops were fun to test. Actually still have some more CPU testing to do.
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  4. #2354
    Pie assassin
    Join Date
    Nov 2007
    Location
    Where lights collide
    Posts
    2,275
    Quote Originally Posted by linuxfan View Post
    going out to get 55l of ln2 for the 980x 3003b475...
    Wish me luck!
    push it!
    Current Status - Testing & Research

  5. #2355
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by ZenEffect View Post
    push it!
    Insulated and just about ready to roll!
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_3639.JPG 
Views:	252 
Size:	208.2 KB 
ID:	108307   Click image for larger version. 

Name:	IMG_3641.JPG 
Views:	252 
Size:	180.0 KB 
ID:	108308   Click image for larger version. 

Name:	IMG_3645.JPG 
Views:	255 
Size:	144.8 KB 
ID:	108309   Click image for larger version. 

Name:	IMG_3646.JPG 
Views:	256 
Size:	204.9 KB 
ID:	108310   Click image for larger version. 

Name:	IMG_3653.JPG 
Views:	257 
Size:	237.6 KB 
ID:	108311  

    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  6. #2356
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Friends don't let friends use kneaded eraser.

    3 layers of Conformal spray & vaseline.
    Much better in every single aspect.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  7. #2357
    Brilliant Idiot
    Join Date
    Jan 2005
    Location
    Hell on Earth
    Posts
    11,015
    Quote Originally Posted by BenchZowner View Post
    Friends don't let friends use kneaded eraser.

    3 layers of Conformal spray & vaseline.
    Much better in every single aspect.
    conformal ftw, btw your buddy trans am has commenced operation corrupted by chew* and on his way up, should be here in an hour or so
    heatware chew*
    I've got no strings to hold me down.
    To make me fret, or make me frown.
    I had strings but now I'm free.
    There are no strings on me

  8. #2358
    Xtreme Enthusiast
    Join Date
    Mar 2008
    Posts
    762
    Whats wrong with eraser?
    And btw linuxfan, lovely looking setup
    What pot you using?

  9. #2359
    Xtreme Addict
    Join Date
    Feb 2010
    Location
    Wisconsin
    Posts
    1,634
    Linuxfan, you hear about the new Mushkin sticks? It's like gluing a Redline to a Ridgeback... because they are... REDLINE RIDGEBACK!
    Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.

  10. #2360
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by BenchZowner View Post
    Friends don't let friends use kneaded eraser.

    3 layers of Conformal spray & vaseline.
    Much better in every single aspect.
    Quote Originally Posted by chew* View Post
    conformal ftw, btw your buddy trans am has commenced operation corrupted by chew* and on his way up, should be here in an hour or so
    Gotta do conformal just haven't jumped on the board yet.

    Quote Originally Posted by GeorgeStorm View Post
    Whats wrong with eraser?
    And btw linuxfan, lovely looking setup
    What pot you using?
    Thanks George!
    Eraser doesn't insulate the board as well as a complete coating of rubber and you have to install it each time you want to bench.
    The CPU pot was made by Ryba.

    Here's what I was able to get today... I'm sure there's more clocks in the CPU though still feeling it out.
    Superpi32M, 1M, and pifast next.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	XS 10-8-10.JPG 
Views:	242 
Size:	30.6 KB 
ID:	108323  
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  11. #2361
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Kneaded eraser is good for "low" temp benching, as in temps being hold nearly statically in the -70 to -90C range.
    For any kind of long term benching with seriously low temps ( -120 and higher ) kneaded eraser is only going to cause issues, it's going to get moist, and in an hour or so you'll be having water dripping in every corner of it.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  12. #2362
    Xtreme Enthusiast
    Join Date
    Mar 2008
    Posts
    762
    Ah fair play
    Even in the -30 to -40 range I sometimes get bleeding, but othertimes I don't, not sure why
    Haven't got that cold yet (sadly ) so I guess I'll just have to find out.

  13. #2363
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by BenchZowner View Post
    Kneaded eraser is good for "low" temp benching, as in temps being hold nearly statically in the -70 to -90C range.
    For any kind of long term benching with seriously low temps ( -120 and higher ) kneaded eraser is only going to cause issues, it's going to get moist, and in an hour or so you'll be having water dripping in every corner of it.
    I was at -182 for a few hours with this chip... The room was pretty dry(basement that is temperature controlled) so the condensation wasn't so bad. It did get wet though.
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  14. #2364
    Pie assassin
    Join Date
    Nov 2007
    Location
    Where lights collide
    Posts
    2,275
    xs is coming up on the single core challenge! great job you guys!
    Current Status - Testing & Research

  15. #2365
    Assistant Administrator systemviper's Avatar
    Join Date
    Nov 2007
    Location
    Newtown, CT
    Posts
    2,875
    Quote Originally Posted by Linuxfan View Post
    I was at -182 for a few hours with this chip... The room was pretty dry(basement that is temperature controlled) so the condensation wasn't so bad. It did get wet though.
    nice setup, seems your all over the place
    HWbot - Team: XtremeSystems
    XS cruncher - Team: XtremeSystems
    OCN Feedback
    HEAT


    *** Being kind is sometimes better then being right.

  16. #2366
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by systemviper View Post
    nice setup, seems your all over the place
    Thanks
    I was prepped and going to do some more heavy testing today but got stopped by a CBB with the cascade running -120oC need to figure out how to bypass this then I'll be running again.
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  17. #2367
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    What are you running Linuxfan ?
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  18. #2368
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by BenchZowner View Post
    What are you running Linuxfan ?
    Was running a lapped Q6600 G0 with some Crucial Ballistix D9 mem in a EP45-UD3P rev 1.0 board but had a CBB. Wasn't sure where the hot gas bypass valve was so I just had to shut 'er down.
    Found it and am ready to roll today.
    Will either test out the Q6600 on Cascade, Q9450 for the gold(and hope it doesn't CB at -120oC) or slap a Ceader Mill CPU in my DFI P35 T2R board to try for some 7ghz+ CPU-Z action on LN2(either the 347, 356, one of the 631s or a 651).
    Too much to do and too little time.
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  19. #2369
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Try lowering the CPU PLL Voltage ( sub-specs ) it may lower the CBB & CB.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero

  20. #2370
    3D Team Captain Don_Dan's Avatar
    Join Date
    May 2007
    Location
    Munich, Germany
    Posts
    4,199
    In the most recent stage of the ASUS 1156 Overclocking Championship, two of our members entered Top 10, chew* and FUGGER came in 5th and 7th respectively. Zeneffect made 15th place in this stage!
    Good luck for the next stage!

    In HWBot's OC Challenge October, thanks to some excellent submissions by chew* and G.Foyle, the team is currently ranked 2nd in the overall ranking, while still holding the record in the 3DMark Vantage stage. Nice work!

    Quote Originally Posted by chew* View Post
    You can never have enough D9's.

  21. #2371
    Pie assassin
    Join Date
    Nov 2007
    Location
    Where lights collide
    Posts
    2,275
    Quote Originally Posted by Don_Dan View Post
    In the most recent stage of the ASUS 1156 Overclocking Championship, two of our members entered Top 10, chew* and FUGGER came in 5th and 7th respectively. Zeneffect made 15th place in this stage!
    Good luck for the next stage!

    In HWBot's OC Challenge October, thanks to some excellent submissions by chew* and G.Foyle, the team is currently ranked 2nd in the overall ranking, while still holding the record in the 3DMark Vantage stage. Nice work!
    it appears in overall standings, we have beat out to oca guys for the time being as well.
    Current Status - Testing & Research

  22. #2372
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by ZenEffect View Post
    it appears in overall standings, we have beat out to oca guys for the time being as well.
    Nice work guys!
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  23. #2373
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Tested the Q9450 on my EP45-UD3P rev. 1.0 board with the cascade...
    Seems like the chip doesn't like to be overfrozen, didn't get much farther with clocks than my runs with the EP45T-UD3LR board and the SS unit. Seemed like it had a coldslow or something though, results started getting super slow at high speeds.
    Might try on air tomorrow and see what I can figure out.
    Cascade runs great.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_3725.JPG 
Views:	150 
Size:	73.8 KB 
ID:	108437  
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

  24. #2374
    Xtreme Guru
    Join Date
    Jul 2004
    Location
    10009
    Posts
    3,628
    me and chew this past weekend. massman wont let me submit in the oct. contest with his card. but for the record.
    http://hwbot.org/community/submissio...870_9827_marks

  25. #2375
    Wpprriimmee crrraaazzzyyy
    Join Date
    May 2009
    Location
    Alabama
    Posts
    1,804
    Quote Originally Posted by trans am View Post
    me and chew this past weekend. massman wont let me submit in the oct. contest with his card. but for the record.
    http://hwbot.org/community/submissio...870_9827_marks
    The score Chew* got was higher so it wounldn't make a difference at all if you posted that score.
    Its great that you were able to bench with Brian this last weekend, I'm sure it was a good experience.
    Why don't you try some PCMark sometime with your three SSDs? I"m sure that'd be fun.
    Heatware



    Custom SS unit by Gray Mole, Sdumper Cascade, K|ngp|n F1 Gemnni, TEK9 Fatboy, TEK9 Slim, NB-1, H2O stuff...
    Celeron 347, Celeron 356, Celeron 420, 2x P4 631, P4 670, P4 640, P4 651, P4 524, PD 915, P4 540J, 2x P4 530J, P4 520J Crucial Ballistix 2x1GB DDR2-8500 2x Asus REX X48, Gigabyte EP45-UD3P rev 1.0, Asus Commando P965,
    Stuff I used to have:
    Asus RIIIE X58, Evga Classified P55, Gigabyte EP45T-UD3LR, i5 670, E8600, Q9650, Q9550, , 3x2GB Mushkin Redline 2000C8,, G.Skill 2x2GB PC9600(Silver), Evga Evbot
    XFX 4770 modded, XFX 7950GT, XFX 6600GT, Evga 8600GTS 512MB, 3850 OC, 4x 3870s, and X600

    "In this world, Elwood, you must be oh so smart or oh so pleasant. Well, for years I was smart. I recommend pleasant." - James Stewart

Page 95 of 217 FirstFirst ... 458592939495969798105145195 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •