Yes, it's easy, there is no wonders in electronics, only physics laws Try with 10k VR.
***Bump***
I'm trying to get a nice power source that gives 2-3 volts. I could make one myself, but that's to difficult. So I thought, why not sense-wire-mod the 3.3v rail to 2-3 volts. Now, upping the voltage is easy, but how do I decrease it? Is there a way? I tried really everything...
Thanks.
Having issues with this mod...
Supply is Coolermaster Real Power Pro 850W
The supply only has two sense wires, orange and red. I completed the mod exactly as describded.
Only problem now is when I turn it on its ok, and after I turn the VR's down for a long time, they must alost be at zero, the supply will just shut off at a certain point. The voltage does not rise on any of the rails before shut down, even when I turn the VR extremely slow.
Anybody know whatsup? Do the newer supplies have some built in protection that does not allow this to work?
Anybody still doing this mod?
CPU: Lapped QX6700 @ 4000MHz, bench @ 4250MHz
RAM: Teamgroup DDRII PC6400 @ 1066 cas5
MOBO: eVGA 680i SLI
VID: eVGA 8800GTX + Zotac 8800GTX SLI...GPU voltmodded....Memory voltmodded (both cards)
BOOT Drive: Seagate 320GB 7200.10 RAID 0
Storage Drive: Seagate 640GB 7200.11 RAID 1
Samsung Super Write Master
Coolermaster Real Power Pro 850W
Custom Bench Table
LaCie 19inch CRT
Single Stage Phase Change - CPU
Water - VGA's
I have the corsair hx520.. does anyone know if this needs the fixed inline?? or do I only need to add the VR to it? also this will work with only changing the 12v right.. or should I change the rest while I'm in there. just so I have it if needed.
Project HAF 932 Water-Cooled
__________________
New OC Validation
- Q9650 4.0 Ghz For Now -
- GTZ, Feser 360, D5 Vario, EK Multi-Option -
- eVGA 750i FTW! -
- eVGA GTX 480 H20 & GTX 295 -
- 2x2GB Dominators PC2-8500C5D -
- WDCaviar Black 640GB AALS x2 (Raid0) -
- FreeAgent Pro 500GB Ext x2 -
- Enermax Revolution 85+ 1050w PSU -
- X-Fi XtremeGamer -
- CM HAF 932 H20 -
- Dell U2410 IPS LCD -
- Logitech G11 & MX-518 /G9 -
- Sony 24x Optical w/ LightScribe -
- BOSE Companion 3 -
- ATH-AD900 Cans & UE Triple.Fi 10 Custom IEM's -
- Nikon D40 w/18-105mm & 55-200mm VR's -
What about new psus can you mod those to? i have the InWin 1500w and i would like to get the 12v a little higher to about 12.35v instead of 12.15v?
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
Bookmarks