MMM
Results 1 to 25 of 254

Thread: Official Intel Gulftown (Westmere) Overclocking and Batch Tracking Thread

Hybrid View

  1. 09-27-2010, 07:19 AM #1
    BenchZowner
    BenchZowner is offline
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Send a message via ICQ to BenchZowner Send a message via AIM to BenchZowner Send a message via MSN to BenchZowner Send a message via Skype™ to BenchZowner
    Quote Originally Posted by Toolius View Post
    Hello BenchZowner
    Did you have a chance to test this cpu on air ?
    just got a 3005F758T myself !!
    Damn it.. 2nd 980x with the same F batch.. now i got 2
    Anyhow will update as i start testing.. the cpu just arrived
    Cheers
    Nope, not yet.
    At the moment all my X58 motherboards are dead
    Should be able to get some new boards in a few days and then I'll give the 980Xs a ride.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
    Reply With Quote Reply With Quote
  2. 10-03-2010, 04:17 AM #2
    [DRACO]
    [DRACO] is offline
    Registered User
    Join Date
    Nov 2008
    Posts
    41
    hello

    I7 980X Rectail
    Msi Xpower x58
    h2o laind d5 + Ek supreme

    4500mhz 3dmark06 1,31vt pass cpu test



    4570mhz vantage 1,36vt pass




    soon to ln2...
    Reply With Quote Reply With Quote
  3. 10-04-2010, 11:47 AM #3
    Cookiesowns
    Cookiesowns is offline
    Xtreme Enthusiast
    Join Date
    Mar 2010
    Location
    Irvine, CA
    Posts
    516
    Send a message via AIM to Cookiesowns
    Worlds first Golden "F" batch? 3005F803T

    http://valid.canardpc.com/show_oc.php?id=1418660

    Wasn't stable for too long, bad contact on block and reversed flow on inlet outlet.

    This chip really doesn't like high clocks, but rather mid-high clocks and low voltage.

    Currently at 4.2 200x21, 3400uncore and 2000mhz ram at C8-9-8, 1.318V and 1.34QPI, stable for LinX however I want, and Prime, although don't believe me if you want, I'm not going to waste time spending hours for stress testing.

    Gaming + high load rendering, all stable.

    http://valid.canardpc.com/show_oc.php?id=1419419



    Uploaded with ImageShack.us

    Seems like cpu-z glitched. 1.8V????? ON WATER???

    haha, click validation link
    Last edited by Cookiesowns; 10-04-2010 at 11:54 AM.
    Project Elegant Dreams
    CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
    Sound:Asus Xonar Xense w/Sennheiser PC350
    SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,


    Water Cooling
    Main Loop
    EK Supreme HF
    EK GTX480 blocks on EVGA 580s
    MCP355 and MCP35X in serial
    Dual BlackIce GTX480 Rads
    Reply With Quote Reply With Quote
  4. 10-04-2010, 11:50 AM #4
    BenchZowner
    BenchZowner is offline
    One-Eyed Killing Machine
    Join Date
    Sep 2006
    Location
    Inside a pot
    Posts
    6,340
    Send a message via ICQ to BenchZowner Send a message via AIM to BenchZowner Send a message via MSN to BenchZowner Send a message via Skype™ to BenchZowner
    Quote Originally Posted by Cookiesowns View Post
    Worlds first Golden "F" batch? 3005F803T

    http://valid.canardpc.com/show_oc.php?id=1418660

    Wasn't stable for too long, bad contact on block and reversed flow on inlet outlet.

    This chip really doesn't like high clocks, but rather mid-high clocks and low voltage.

    Currently at 4.2 200x21, 3400uncore and 2000mhz ram at C8-9-8, 1.318V and 1.34QPI, stable for LinX however I want, and Prime, although don't believe me if you want, I'm not going to waste time spending hours for stress testing.

    Gaming + high load rendering, all stable.
    There are lots of good 3005F's for air/water.

    Same applies to the ones I have here now.
    4.4GHz 24/7 on the ultra-120 is a breeze.
    Coding 24/7... Limited forums/PMs time.

    -Justice isn't blind, Justice is ashamed.

    Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P. ), Juan J. Guerrero
    Reply With Quote Reply With Quote
  5. 10-04-2010, 04:36 PM #5
    amd3001
    amd3001 is offline
    Xtreme Member
    Join Date
    Jun 2003
    Location
    USA
    Posts
    123
    BenchZowner what kind of voltage are u using for 4.4 ghz. idle voltage and load voltage? are u running vdroop off or on?
    Reply With Quote Reply With Quote
  6. 10-06-2010, 01:22 AM #6
    Cookiesowns
    Cookiesowns is offline
    Xtreme Enthusiast
    Join Date
    Mar 2010
    Location
    Irvine, CA
    Posts
    516
    Send a message via AIM to Cookiesowns
    Quote Originally Posted by amd3001 View Post
    BenchZowner what kind of voltage are u using for 4.4 ghz. idle voltage and load voltage? are u running vdroop off or on?
    For me on my 3005F, on water. I'm running at 4.6ghz, 6C6T with 1.4275Vcore in bios, after LLC and droop CPUID reads as close to 1.45. Max temp with FFT 71F 2800RPM fan = 62c I love water cooling.
    Project Elegant Dreams
    CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
    Sound:Asus Xonar Xense w/Sennheiser PC350
    SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,


    Water Cooling
    Main Loop
    EK Supreme HF
    EK GTX480 blocks on EVGA 580s
    MCP355 and MCP35X in serial
    Dual BlackIce GTX480 Rads
    Reply With Quote Reply With Quote
  7. 10-06-2010, 09:14 AM #7
    justin.kerr
    justin.kerr is offline
    Xtreme Enthusiast
    Join Date
    Mar 2009
    Posts
    605
    running the 1.5x uncore, Cookiesowns sure seems to put your Everst numbers super low.
    Email/web browsing PC
    MM Ascension case, 24/7 settings
    Classified, 980x @ 4,525Mhz, HT on 1.39V
    (3) ATI 5870's@ 1062Mhz
    G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
    (4) intel x25m RAID 0
    CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
    plus many other rigs.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules