just got a 3020A477 980X PAKG. DATE 07/29/10. vid is 1.2v my other 980x vid is 1.1v more to follow
UPDATE: 4435MHZ @ 1.38. will push some more now.
just got a 3020A477 980X PAKG. DATE 07/29/10. vid is 1.2v my other 980x vid is 1.1v more to follow
UPDATE: 4435MHZ @ 1.38. will push some more now.
Last edited by hlonipha; 09-13-2010 at 08:02 PM.
Asus RIVE Bios 2003
3930k 4.5 ghz @1.29v
G-SKILLS 32gig ddr-1600 ripjaws Z
Enermax Evo Galaxy 1250W
2x EVGA GTX 480 Superclocked SLI @ 900/1800/2000
X-Fi Fatal1ty Titanium PCI-E
4 x crucial Realssd C300 256 Raid 0
Areca 1880i
Seagate 1TB
CM HAF 932
On water:
HK 3.0
2x MCP655
FESER X360
Blackice GTX 480
DD-GTX 480 VGA blocks
DD Reservoir
Windows 7 64bit
Dell 3008WFP 30"
Help Save Lives Join World Community Grid!
Mine came in the mail from Amazon and my specs are:
Pack Date: 07/28/10
Made in Costa Rica
MM# 907397
FPO/BATCH: 3020A476
Waiting on a vid card, then throwing this on a REIII board until I get my watercooling all settled with. Hopefully this is a good batch...
so far mine is linx/prime stable@ 4532 mhz@ 1.42v. pushing for 4600mhzOriginally Posted by 3dchipset
@1.43v-1.44v
Asus RIVE Bios 2003
3930k 4.5 ghz @1.29v
G-SKILLS 32gig ddr-1600 ripjaws Z
Enermax Evo Galaxy 1250W
2x EVGA GTX 480 Superclocked SLI @ 900/1800/2000
X-Fi Fatal1ty Titanium PCI-E
4 x crucial Realssd C300 256 Raid 0
Areca 1880i
Seagate 1TB
CM HAF 932
On water:
HK 3.0
2x MCP655
FESER X360
Blackice GTX 480
DD-GTX 480 VGA blocks
DD Reservoir
Windows 7 64bit
Dell 3008WFP 30"
Yeah, I'm hoping mine is as good as yours... I want to run basically at 4.2GHz 24/7 with as minimal voltage as possible. :-)
4.2ghz with voltage lower than 1.32v
Asus RIVE Bios 2003
3930k 4.5 ghz @1.29v
G-SKILLS 32gig ddr-1600 ripjaws Z
Enermax Evo Galaxy 1250W
2x EVGA GTX 480 Superclocked SLI @ 900/1800/2000
X-Fi Fatal1ty Titanium PCI-E
4 x crucial Realssd C300 256 Raid 0
Areca 1880i
Seagate 1TB
CM HAF 932
On water:
HK 3.0
2x MCP655
FESER X360
Blackice GTX 480
DD-GTX 480 VGA blocks
DD Reservoir
Windows 7 64bit
Dell 3008WFP 30"
Well I think my CPU is absolute c r a p.
I managed a 4256 Mhz (133Mhz x 32) run with Linx 20 passes, on 1.45volts. Temps were around 50 celsius on water.
As soon as I bump it to 134 Mhz I get unstable, even with a 12 multi.
I would say the F is for fragile all right...
I can't even run at stock voltages/frequency anymore.. As soon as I do Windows 7 Ultimate locks up after about 3 mins, regardless of what I'm doing.
Dodge this batch.
I think I got a voltage hungry chip from batch 3020A477, as it wont stabilize in LinX @ 4.6ghz with HT enabled at any voltage below 1.54375v in the bios (1.541v idle in OS) for LinX. Needless to say it doesnt appear to scale voltage very well at all. I'll post the screenshot once the run is complete.
Pack Date: 07/29/2010
Made in Costa Rica
MM# 907397
FPO/ Batch #: 3020A477
Last edited by cq842000; 09-22-2010 at 08:58 AM.
Batch #3013A562 is very strong, i cant kill it so easy... VTT tested to 1,75v on air :o runs 4,4G at 1,44 Ht on 24/7very hard to kill
vcore tested on air 1,8v still live =) vmem tested 2,5v not dead mem controller to
[Core i7 4820K Ivy Bridge-E @4,7Ghz Vcore 1.28v][Asus Rampage Iv Extreme bios 4403][16Gb G-skill Ocz 2133mhz DDR3][Lian Li Pc2120 B, black Case][480Gb OCZ SSD main disk+120Gb ssd game disc][EVGA GTX Titan@900mhz Oc luft ][Os Windows 7][Telia 1000/250Mbits fiber ][24,4TB Lagring] upcoming Intel Haswell-E 8 cores/16 Threads next year Q4 2014 ?
Alright, here is full out on the problem size or "all" selected. I had to bump the voltage one notch to keep it from giving a stop on error after 10 loops.
# 3020A477 | Core i7 980X [6C 12T] @ 4504.1MHz | 1.517 | EVGA Classified E762 | Water
Last edited by cq842000; 09-20-2010 at 04:19 PM.
i7 980x 3913A472
R3E
Hyper-X 2KC8 6GB
gflops are low it looks like you might be running an older version of linx that does not have the updated linpack libraries.i7 980x 3913A472
R3E
Hyper-X 2KC8 6GB
3005F758T #1
CBB approx -120C @ Dual Channel
CB approx -170C @ Dual Channel
LN2, Hexus PiFast 6.2GHz @ 1.75V @ -128C @ 6c12t
LN2, AquaMark 3 max 6.3GHz @ 1.8V @ -160C @ 6c12t
the results of a very quick test in a crowded room with people bothering me all the time
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.), Juan J. Guerrero
3013A739 w3680 -118cb -75cbb avoid like the plague
5.2ghz pi 1m 1.58v -80c hates cold and uncore
3020A477 i980x -140cb -120cbb mediocre at best
5.6ghz vantage cpu test 1.725v -135c
As you raise the vcore the cb gets warmer IE 1.8v -125cb
No screenshots as not worth it for me to print screen lol
both on r3e
Last edited by Splave; 09-21-2010 at 10:02 AM.
Hello BenchZowner
Did you have a chance to test this cpu on air ?
just got a 3005F758T myself !!
Damn it.. 2nd 980x with the same F batch.. now i got 2
Anyhow will update as i start testing.. the cpu just arrived
Cheers
Intel Core i7 3960x | 3x Intel Core i7 980x | 3x Intel Core i7 920 | 2x Intel Core i7 2600k | 2x AMD opteron 6282 SE | 3x Asus Rampage II Extreme | 2x Asus Rampage III Extreme | Asus Rampage IV Extreme | 1x Gigabyte X58A-UD7 | 2x Asus Maximus IV Extreme-Z | Asus KGPE-D16 | 3x 6GB DDR3 Corsair Dominator 1600 Cl7 | 1x Patriot Viper II 6GB 2000 Cl8 | 3x Corsair Hx1000 | 4x Corsair Ax 1200 | 3x Antec 1200 | 4x Corsair Obsidian 800D | 2x Intel 80Gb G2 SSD | 4x Kingston HyperX 120GB | 2x Vertex 2 120GB | 2xWD 150GB Velociraptor + 1x WD 300GB Velociraptor +5TB | Msi Nvidia Gtx 295 | Msi Ati 4870x2 OC Edition | 2x Msi Ati 4890 OC Editions| 2x Sapphire Ati 5870's| Sapphire 5970 OC Edition | 2x Msi Gtx 460 | 3x Sapphire 6970 | 3x Asus Gtx 580 | 3x Asus 7970
Nope, not yet.Hello BenchZowner
Did you have a chance to test this cpu on air ?
just got a 3005F758T myself !!
Damn it.. 2nd 980x with the same F batch.. now i got 2
Anyhow will update as i start testing.. the cpu just arrived
Cheers
At the moment all my X58 motherboards are dead
Should be able to get some new boards in a few days and then I'll give the 980Xs a ride.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
hello
I7 980X Rectail
Msi Xpower x58
h2o laind d5 + Ek supreme
4500mhz 3dmark06 1,31vt pass cpu test
4570mhz vantage 1,36vt pass
soon to ln2...
Worlds first Golden "F" batch? 3005F803T
http://valid.canardpc.com/show_oc.php?id=1418660
Wasn't stable for too long, bad contact on block and reversed flow on inlet outlet.
This chip really doesn't like high clocks, but rather mid-high clocks and low voltage.
Currently at 4.2 200x21, 3400uncore and 2000mhz ram at C8-9-8, 1.318V and 1.34QPI, stable for LinX however I want, and Prime, although don't believe me if you want, I'm not going to waste time spending hours for stress testing.
Gaming + high load rendering, all stable.
http://valid.canardpc.com/show_oc.php?id=1419419
Uploaded with ImageShack.us
Seems like cpu-z glitched. 1.8V????? ON WATER???
haha, click validation link
Last edited by Cookiesowns; 10-04-2010 at 11:54 AM.
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
There are lots of good 3005F's for air/water.
Same applies to the ones I have here now.
4.4GHz 24/7 on the ultra-120 is a breeze.
Coding 24/7... Limited forums/PMs time.
-Justice isn't blind, Justice is ashamed.
Many thanks to: Sue Wu, Yiwen Lin, Steven Kuo, Crystal Chen, Vivian Lien, Joe Chan, Sascha Krohn, Joe James, Dan Snyder, Amy Deng, Jack Peterson, Hank Peng, Mafalda Cogliani, Olivia Lee, Marta Piccoli, Mike Clements, Alex Ruedinger, Oliver Baltuch, Korinna Dieck, Steffen Eisentein, Francois Piednoel, Tanja Markovic, Cyril Pelupessy (R.I.P.
BenchZowner what kind of voltage are u using for 4.4 ghz. idle voltage and load voltage? are u running vdroop off or on?
For me on my 3005F, on water. I'm running at 4.6ghz, 6C6T with 1.4275Vcore in bios, after LLC and droop CPUID reads as close to 1.45. Max temp with FFT 71F 2800RPM fan = 62c
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
running the 1.5x uncore, Cookiesowns sure seems to put your Everst numbers super low.
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
my child ln2
i7 980x Bacht 3012B109 -135 BY [DRACO]
Msi xpower 1.0
pot oterrauge
http://hwbot.org/community/submissio..._980x_6529_mhz
Last edited by [DRACO]; 10-08-2010 at 07:11 AM.
I'm not running 1.5x anymore, I think im around 3500mhz uncore now :P
Project Elegant Dreams
CPU: Intel 980x (3005F803T) @ Stock , Mobo: Rampage III Extreme, Ram: 24GB Corsair Vengeance 1600 C9 1T 1.51v GPU: SLI EK'd Vanilla GTX580, 0.875v @ idle.
Sound:Asus Xonar Xense w/Sennheiser PC350
SSD: 2x OCZ Agility 3 120GB RAID-0 on ICH10 Storage: 2x1.5TB Hitachi 5K3000, 1.5TB WD Black, 1TB F3, various other HDD's Case: Obsidian 800D, PSU: Corsair AX1200,
Water Cooling
Main Loop
EK Supreme HF
EK GTX480 blocks on EVGA 580s
MCP355 and MCP35X in serial
Dual BlackIce GTX480 Rads
i want to buy 980x in the next 2 days and I've been reading the thread since the first page, and i am trying to gather from you guys which batch is the most trust worthy for overclocking, looks like the 3003Bxxx is the most stable and safe ones !! .. and reading about the gulftown dying is kindda scary!!!!!!!
3003B is NOT a stable and safe batch....safe batch are 301x, 302x, 303xi want to buy 980x in the next 2 days and I've been reading the thread since the first page, and i am trying to gather from you guys which batch is the most trust worthy for overclocking, looks like the 3003Bxxx is the most stable and safe ones !! .. and reading about the gulftown dying is kindda scary
Reply With Quote
Bookmarks