**Gigabyte GA-X58A-UD7 OC-Tips-Bios-Discussion Thread**

[Gorki]

Btw who have issue with bios F7 in OC, try to disable Keyboard USB support, and disable anything related to USB in integrated peripherals, this settings are enabled by default but with betas and F6 this setting was always disabled by default.

I can't recall is USB support enabled or disabled in F7 but I know that I did enable those in betas while I OC, storage, keyboard and mouse I enable those. Never had any issue with cold boot but I'm not sure how would that effect my OC?

Also better use 101Mhz PCI-E instead of 100MHz.

Ever since I started using this board I've been setting it manually at 100, I'm not sure why 101 instead of 100? I know that 103-108 could help with higher blck value, but I can't confirm myself since I'm sitting on 200 blck.
Any hint is more than welcome?

Any update on the F7x?

I'm on F6x ATM. That's been the best so far for me.

Actually I like it for now, nothing to complain. It has been very snappy and stable overall for my OC.

Uploaded with ImageShack.us
Here is the template for results posted above.

GIGABYTE GA-X58A-UD7

MB Intelligent Tweaker(M.I.T.)

> Advanced Frequency Settings [Press Enter]

CPU Clock Ratio............................: 21x
CPU Frequency ........................(GHz): 4.2 Ghz (200*21)
> Advanced CPU Core Features [Press Enter]

Intel(R) Turbo Boost Tech..................: Enabled
CPU Cores Enabled..........................: Enabled
CPU Multi Threading........................: Enabled
CPU Enhanced Halt (C1E)....................: Disabled
C3/C6/C7 State Support.....................: Disabled
CPU Thermal Monitor........................: Disabled
CPU EIST Function..........................: Disabled
Bi-Directional PROCHOT.....................: Enabled

QPI Clock Ratio............................: x36
QPI Link Speed........................(GHz): 7.2 Ghz
Uncore Clock Ratio.........................: x18
Uncore Frequency......................(MHz): 3600 Mhz
>>>>> Standard Clock Control
Base Clock(BCLK) Control...................: Enabled
BCLK Frequency(MHz)........................: 200
Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
PCI Express Frequency(MHz).................: 100
>>>>> Advanced Clock Control
CPU Clock Drive (mV).......................: 800mV 
PCI Express Clock Drive (mV)...............: 900mV
CPU Clock Skew (ps)........................: 0ps
IOH Clock Skew (ps)........................: 0ps

> Advanced Memory Settings [Press Enter]

Extreme Memory Profile(X.M.P.).............: Disabled
System Memory Multiplier (SPD).............: 8
Memory Frequency(MHz)......................: 1600
Performance Enhance........................: Turbo
DRAM Timing Selectable (SPD)...............: Expert
Profile DDR Voltage........................: 1.5
Profile QPI Voltage........................: 1.175
Channel Interleaving.......................: Auto
Rank Interleaving..........................: Auto
>>>>> Channel A, B, & C
> Channel A, B, & C Timing Settings [Press Enter]

>>>>> Channel A, B, & C Standard Timing Control
Cas Latency Time...........................: 6
tRCD.......................................: 6
tRP........................................: 6
tRAS.......................................: 20
>>>>> Channel A, B, & C Advanced Timing Control
tRC........................................: Auto
tRRD ......................................: Auto
tWTR ......................................: Auto
tWR........................................: Auto
tWTP.......................................: Auto
tWL........................................: Auto
tRFC.......................................: Auto
tRTP.......................................: Auto
tFAW.......................................: Auto
Command Rate (CMD) ........................: 1
>>>>> Channel A, B, & C Misc Timing Control
B2B CAS Delay..............................: Auto
Round Trip Latency.........................: Auto

> Channel A, B, & C Turnaround Setting [Press Enter]

>>>>> Channel A, B, & C Reads Followed By Reads
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:
>>>>> Channel A, B, & C Writes Followed By Writes
Different DIMMs............................:
Different Ranks............................:
On The Same Rank...........................:

> Advanced Voltage Settings [Press Enter]

>>> CPU
LoadLine Calibration.......................: level 2
CPU Vcore..................................: 1.325
xDynamic Vcore(DVID).......................: Disabled
QPI/VTT Voltage............................: 1.335
CPU PLL....................................: 1.80
>>> MCH/ICH
PCIE.......................................: 1.50
QPI PLL....................................: 1.10
IOH Core...................................: 1.10
ICH I/O....................................: 1.50
ICH Core...................................: 1.14
>>> Dram
DRAM Voltage...............................: 1.66
DRAM Termination...........................: 0.75
Ch-A Data VRef.............................: 0.75
Ch-B Data VRef.............................: 0.75
Ch-C Data VRef.............................: 0.75
Ch-A Address VRef..........................: 0.75
Ch-B Address VRef..........................: 0.75
Ch-C Address VRef..........................: 0.75

> Miscellaneous Settings [Press Enter]

Isochronous Support........................: Enabled
Virtualization Technology..................: Enabled