Spent some quality time with MountianMod today.
Go All Black Matte
Use Black Matte (outlets) and Alternate with Silver Bitspower ( inlets)
Use Black Matte (outlets) and Alternate with Koolance (inlets)
Go with all Koolance Compression fittings and Quick Disconnects
Go with all Koolance Compression fittings Don't use QD's
Screw Compression Fittings and go Old school with all barbs.
Spent some quality time with MountianMod today.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
6 4x120 rads?!?! I just fell out of my chair.
lol but in all seriousness, AWESOME build. haha.
I just got the same exact case though with the normal Horizontal MB possition. I wanted it like how you have it with it right in the middle and the 3 fans above the mb tray and P/S below. Though didnt have the patience to wait till mid October for the custom back. I originally was going to order the brushed aluminum like my former MM case and just get an extra panel and cut it the way i want the back panel but ofcourse they were out of stock on the back panel in brushed aluminum and i had to just order the case in the wrinkle black insted. Love that finish but it makes it like impossable to now make the panel myself as it would trash the finish. Its either leave it alone as is or flip the back panel 180 and have the mB tray at the bottom but then the tube lines would be crazy going from the bottom of such a tall case all the way up to the top of the rad.
I'll probably get the back panel made later on but damn will it suck to redue the water lines afterwards lol.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Are you sure they'll all fit side by side?
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
Oh and great idea of sticking the tripple drive bay in the rear out of the way of all the rads! I also would of loved the all quad rads in front without the odd ball drive bay on it. I guess it would be odd having it at the back bottom but really, how often do you use the DVD drive?
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Yes
Front panel fitted , I have to assemble all most everything then take it apart and reassemble. 75% of my builds theory but I measured 3 times cut once. But even then some things don't add up.
Some panel p0rn for ya . The Pics aren't the best the lighting in the room sucks.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Now for the big question.. "IF" one was to put a push pull fan set on those rads, would you still beable to fit a quad or heh, another 3 quad rads up top with a push pull setup? I know get real but i wana know.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Nope not internally the simply not enough room (and they don't make it bigger), but you could externally , Filter>Fan>case>rad>Fan, this was my original though , but seriously I can't run the numbers I can't find my excel but as it is now it about 4 quads overkill Cooling for standard usage. And max OC/gameing its still about 50% overkill. But I never have to mess with the fans off silent even while running heaviest anything ;-) also planning on upgrading next year so this will have the headroom for max OC/sli/xfire and never have to adjust the fans off silent.
So going through the trouble/expense of adding 24 fans to the system for no gain added noise when I had other things to spend money on ..well.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Redid the photo's for last night in morning light.
Last edited by MagisD; 09-19-2010 at 04:51 AM. Reason: Where my damm coffee Woman !!!!!! *sound of mug hitting my head*
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
An 2 More messing around shots
2001: A Space Odyssey anybody ?
Good example of the finish/anodizing and what it looks like with finger streaks on it.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
I'll let the pics speak for themselves.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Sweet.. I cant see why you could'nt get some fitting to fit between them like a 90 or something. I could feel a headache coming on just trying to figure out where to either vent or get cool air in the case for both the front and top. Prob have vents on the sides so air could enter the case and exit through the rads. If you did just a pull only it would be easy to clean the rads of dust build up that way.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Ofcourse you could rotate the rads around so the fittings would be at the back and the bottom of the case.. Would be alot harder to bleed the air out of the rad that way though. Plus a mess with the tubing.. but you could dasiy chain the rads on the front and have them run into a large tube res and the rads on the top daisy chain together and run to another port on the same res. That would seriously cut down on the tubing. hehe.. crazy though but looks tough.
Running now, http://www.evga.com/forums/tm.aspx?m=693435
Intel 3960 @ 5Ghz
Asus Rampage IV Extreme
QuadFire 7970
X-Fi Sound Card
16GB G.Skill 2133Mhz DDR3 Quad Channel Ram 9,11,10 @ 1.65v.
3 Acer 23" 3D Ready LCDs
2x Ultra X4 1600 WATT P/S 's
MM Extension Ascention UFO Case W/ Top of the line Water cooling. Dream build!
Simple really , Front panels are cpu loop top are gpu , connected with Koolance adjustable sli video card spacers. In-SLI-SLI-Out . Pump/res are mounted on bottom set of rad holes in between the rads them self with undesigns infinite vertical.
As far as cleaning goes those filter meshs are outside removable. Modright filterright
Air is pull intake in front and back. Push out top.
I spent months planning this case. Only major change since i finalized is the pumps/rez.
Last edited by MagisD; 09-19-2010 at 02:35 PM.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
So whats everybody think of by BL so far , what would you like to see more of or less of ?
Should I get mod to delete and start clean to clear the questions off the front page ?
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
3 exhaust fans? or am I missing something?
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
| Completed: Project "Simples" | Custom TJ07 | P67A-UD3 | 2600K | GTX460 | MCR320+MCR220 | DDC 18W+XSPC Res |
| In progress: Project "Weebeastie" | A70B | P6T7 WS | i7-970 | 4xGTX470 | PA120.3+RX240+TFC120 | XSPC Dual-Pump-BayRes |
| In progress: Project "Gemini" | PC-P80B | EVGA SR-2 | 2xX5650 | 7100GS | PA140.3 | EK DCP-4.0 |
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Damn! I want to see the tubing job!
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
LOL , my fittings should be here tomorrow ;-) the tubing planning goes in effect I also have a tube routing plan .. while not the most efficient should look sweeeeeeeeet.
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
never had any luck exhausting through radiators. Always warmer inside the case, could drop a few radiators, and pull ambient air through and have same/better temps... just throwing that out there.
Email/web browsing PC
MM Ascension case, 24/7 settings
Classified, 980x @ 4,525Mhz, HT on 1.39V
(3) ATI 5870's@ 1062Mhz
G skill perfect storm RAM s 6gb, 2,176 Mhz CAS 8
(4) intel x25m RAID 0
CPU loop, EK supreme HF, EK mobo block, 500MM bitspower res, 2 DDC 3.25's on XSPC top, 2 XSPC RX 360's, 1 XSPC RX 480, GPU loop, EK water blocks, with nickel backs, 2 swiftech mcr 320's, 500MM bitspower res, ddc 3.25, XSPC top all with 1850 RPM gentle typhoons
plus many other rigs.
Positive pressure more in then out will help also the back intake are aligned to blow cool air over along the top rads so they intake that as well.
Sent from my X10a using Tapatalk
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Huh box with a grand in fittings tops and block showed up......I thought It'd be bigger. ........
Sent from my X10a using Tapatalk
MagisD
____________________________
Lurker, Dreamer, Planner, Noob
6 Quad rads 1 case Maybe I went a little overboard....Overkill Cube
Bookmarks