If you guys noticed, the app for the iPhone was posted to the app store the other day. Unfortunately we found out that it needed an accompanying driver on the host PC to make it work, and ASUS hadn't released it yet...
Well HERE IT IS!
http://rapidshare.com/files/41896374...k_v1.00.16.zip
It seems to work great over Wifi, I haven't tried USB or Bluetooth yet. Bluetooth apparently requires you have tethering enabled on your iPhone.
The installer is bad and doesn't add start menu items, so you have to navigate to:
C:\Program Files (x86)\ASUS\ASUS Mobilink\
and launch the ASUS Mobilink.exe file manually.
I added it to my startup folder to avoid having to start it every time.
Also figured I'd share my BIOS template in case someone has a similar config, and is looking for help:
Code:Target CPU Frequency 4200MHz Target DRAM Frequency 2005MHz LN2 Mode [Disabled]*** QPI Loadline Calibration [Enabled]*** Sync Mode [Enabled] AI Overclock Tuner [Manual] OC From CPU level Up [Auto] CPU Ratio Setting [Auto] CPU Turbo Power Limit [Disabled] >CPU Configuration---------------------------- CPU Ratio Setting [Auto] C1E Support [Disabled] Hardware Prefetcher [Enabled] Adjacent Cache Line Prefetcher [Enabled] MPS and ACPI MADT ordering [Modern ordering] Intel(R) Virtualiyation Tech [Enabled] CPU TM Function [Disabled] Execute Disable Bit [Enabled] Intel(R) HT Technology [Enabled] Active Processor Cores [All] A20M [Disabled] Intel(R) SpeedStep(TM) Tech [Disabled] Intel(R) Turbo Mode Tech [Disabled] Intel(R) C-STATE Tech [Disabled] C State package limit setting [Disabled] ---------------------------------------------- BCLK Frequency [200] PCIE Frequency [100] DRAM Frequency [DDR3-2005MHz] UCLK Frequency [4009MHz] QPI Link Data Rate [7218MT/s] Memory Configuration Protect [Disabled] >DRAM Timing Control-------------------------- CAS# Latency [9] RAS# to CAS# Delay [9] RAS# PRE Time [9] RAS# ACT Time [25] RAS# to RAS# Delay [Auto] REF Cycle Time [132] WRITE Recovery Time [Auto] READ to PRE Time [Auto] FOUR ACT WIN Time [Auto] Back-To-BackCAS# Delay [Auto] Timing Mode [1N] Round Trip Latency on CHA [Auto] Round Trip Latency on CHB [Auto] Round Trip Latency on CHC [Auto] WRITE To READ Delay(DD) [Auto] WRITE To READ Delay(DR) [Auto] WRITE To READ Delay(SR) [Auto] READ To WRITE Delay(DD) [Auto] READ To WRITE Delay(DR) [Auto] READ To WRITE Delay(SR) [Auto] READ To READ Delay(DD) [Auto] READ To READ Delay(DR) [Auto] READ To READ Delay(SR) [Auto] WRITE To WRITE Delay(DD) [Auto] WRITE To WRITE Delay(DR) [Auto] WRITE To WRITE Delay(SR) [Auto] ---------------------------------------------- CPU Differential Amplitude [800mV] CPU Clock Skew [Auto] IOH Clock Skew [Auto] ------------ Extreme Engine Digi+ ------------ Digi+ PWR Mode [T-Balanced] PWR Volt. Control [Auto] Load-Line Calibration [Full Calibration] CPU Voltege OCP [Enabled] CPU PWM Frequency [1000KHz] Extreme OV [Disabled] Extreme OC [Auto] CPU Voltage [1.36250] CPU PLL Voltage [Auto] QPI/DRAM Core Voltage [1.48750] DRAM Bus Voltage [1.65625] >DRAM REF Voltages---------------------------- DRAM DATA REF Voltage on CHA [Auto] DRAM CTRL REF Voltage on CHA [Auto] DRAM DATA REF Voltage on CHB [Auto] DRAM CTRL REF Voltage on CHB [Auto] DRAM DATA REF Voltage on CHC [Auto] DRAM CTRL REF Voltage on CHC [Auto] ---------------------------------------------- IOH Voltage [1.25875] IOH PCIE Voltage [Auto] ICH Voltage [Auto] ICH PCIE Voltage [Auto] ---------- Spread Spectrum Control ----------- CPU Spread Spectrum [Disabled] DRAM Spread Spectrum [Disabled] ***on-board jumper dependant
Reply With Quote
Bookmarks