I've got a Crucial C300 SATA III SSD connected to the Marvel SATA _6G_1 connectors on the motherboard however I do not see anything in the CMOS settings that is referencing the drive or indicating that it sees the drive. What I'm I suppose to see in the CMOS settings the indicates the the BIOS sees the drive that is connected to it?. Is there anything that is supposed to be indicated in the CMOS settings that indicates that the drive is configured properly. I am going to use the drive as the boot drive but as with a SATA hard drive I need to know that the BIOS configures the drive properly. Please respond to this post with the information as to how do I install and configure this drive.

Thanks