I want your GTX460 vBIOSes!

[CrazyNutz]

Thanks a lot for the advice!
And OMG, what a difference....
I had to go as low as 803 core to become error-free with stock voltage...
And I could pass 4 hours furmark with 846 core.... isn't that extreme?

Anyway, since I am not going for extreme fps, but want 100% stability, this error check ability of OCCT is great. I will reach a point where I am error-free for hours and leave it there....

No prob And here's a little more advice, set the mem to stock then try for more on your core/shader. when you get your core/shader clock at max stable, then start raising your mem clocks. you may not be able to get your mem clocks as high, but you may get your core/shaders up higher, which will benefit you more than the mem.

One more thing, OCCT, and furmark put EXTREME loads on your GPU way more than anything else. Running these things for hours is putting an unnecessary beating on your GPU/MEM/voltage regulators. You could damage your hardware. 1 hour OCCT is more than enough.