cinebench 11.5

[paolo.oliva2]

Hello.
This is my 1090T with Formula IV.
Liquid on 15° temp.



And 965C3@4,157GHz 4,97

[Panther_Seraphi]

Just for lols

[Movieman]

Jeez, all these single socket scores.
Haven't you guys learned yet?
CB11 is dualie and quad socket territory!

[ReKcOlNu]

Just for lols

Is that on water, air cooling?

Nevertheless, I still added it to the CB11.5 score chart.

[Panther_Seraphi]

Stock air atm in a cm stacker 832 with stock fans. Hoping to go thuban soon. Either the 1075 or the 1090

[V-FrIeNd]

1055T AM2+ & DDR2

[Panther_Seraphi]

It seems like Cinebench isnt a really Bandwidth whore as i assumed it would be

[Daveburt714]

OK, I was bored tonite and decided to push my CB11.5 score.

It's no 8.xx but it's still my best ever...
Not too shabby for a conventional water rig. As you can tell from the SS, there were quite a few OS tweaks involved too (turned off all the un-needed stuff).
I probably didn't tune it just right for this bench, kinda went for MAX on everything...

I like CB 11.5, it's a pretty good stability test and not the easiest thing to complete at high clocks on an AMD rig...

[Zeus]

Nice one Dave. I can tell you 8.xx doesn't come by itself, it was real hard. At least for my cpu. Did you manage to fix your >300ht speed problem yet?

[Daveburt714]

Nice one Dave. I can tell you 8.xx doesn't come by itself, it was real hard. At least for my cpu. Did you manage to fix your >300ht speed problem yet?

This is a little OT Zeus, but yeah, I figured out my HTRef problems. It was all related to Memory....
I actually figured it out using my Mushkin BBSE's. All I needed to do was bump the voltage up to 1.60 and I could get higher HTref clocks.
IMHO, I don't think Thubans IMC likes low voltage (<1.5v) mem kits...

I was actually going to start a new thread about this, but I've had a few beers and decided not too...

Oh well, ya got me started now... I'll spill the beans!

Once I figured out that the BBSE's would allow me to clock the HTref higher (as long as I gave it a little more juice), I bought a discounted Hyper kit (Corsair GT 2000 CL8 @ 1.65v), it wasn't cheap, but $220 seemed reasonable...

The sad thing is that even though I can run really tight timings @ 1600+ on the Corsairs, I can't even get close to the Freq clocks I got on the cheapo BBSE's at looser timings...

The Mushkins just seem to be MUCH more flexible....
With decent voltage I could get the Mushkins ~ 6-8-6 @ 1800.
I'm having a hard time getting these GT's >1650 reguardless of timings.
I've only had them for a couple weeks so I very well could be missing something...

If anyone has any tips on tweaking the Corsair GT's for Freq, I'm all ears...

I'm on vacation next week and I'm taking advantage, so excuse me for being buzzed...

[Zeus]

Good to hear you've got it figured out Dave. The Corsairs should do better than that, assuming you have the same kit i had? Give them up to 1.75V and you should see around 880 (DDR 1760) 6-6-6 or even 6-6-5. Don't go lower than 18 for tras, 15 is good up till 820, over that use tras 18.

Good luck.

[ReKcOlNu]

OK, I was bored tonite and decided to push my CB11.5 score.

Nice, that moves you up 8 places in the CB score chart!

[Daveburt714]

ReKcOlNu: Thanks for keeping and updating the list!

I've got a new one though...
Is it stable? Well, it was stable enough to get a good CB score.

What can I say... I couldn't have Flank3r's wicked Air Cooled 1090T beating out my W/C'd 1055.

[ReKcOlNu]

ReKcOlNu: Thanks for keeping and updating the list!

Looking good!

[charged3800z24]

ReKcOlNu: Thanks for keeping and updating the list!

I've got a new one though...
Is it stable? Well, it was stable enough to get a good CB score.

What can I say... I couldn't have Flank3r's wicked Air Cooled 1090T beating out my W/C'd 1055.

Great run... I guess now I need to up my score....

[FlanK3r]

hehe, good work Dave, hm, i must to go harder working, now your 7.82p is very hard for me

[Sanousie]

Here is my gold 1055t chip under a 3/4 hp cascade

[Daveburt714]

Here is my gold 1055t chip under a 3/4 hp cascade

Sure... that shiats easy with awesome cold...

Just kidding man, great chip you have there!

[THOMO]

@Sanousie

Just kidding man, great chip you have there!

+1 yeah nice clocks there.

[Sanousie]

@Sanousie



+1 yeah nice clocks there.

cheers Daveburt714 and THOMO

But it was not easy, took over 3 months of testing and tweaking, phase change is not for the light hearted.

[Manicdan]

someone send him a 1090T, bet he gets 5ghz in under an hour!!!

[FlanK3r]

a bit better CInebench R11.5 run, my record to time. 4320MHz 3085MHz for NB. I tried second 4340MHz run, but about 75% run crash a program :-/. Still aircooling, CPU voltage 1.525V Update me :-)

[felix_w]

Flank3r, i think it's time to move on to better cooling, maybe water....

this cpu you have is an excellent piece.....

[FlanK3r]

thx felix, im think, some day broken 4340 run and of course 7.7 point :-). But in 32-bit i can run Cinebench with same setings at 4370 MHz :-)

[eRazorzEDGE]

Here's my run at 4.625GHz @ 1.55v with the NB at 3.0GHz @ 1.35v under my stock VapoChill LS. It got up to -4°C for this Cinebench run. I just got this chip less than a week ago and normally run it at 4.5GHz @ 1.525v playing BC2 and it hasn't crashed yet.




did someone say they wanted a 5GHz shot?



too bad it crashed right after i saved the SS :p