Quote Originally Posted by Daveburt714 View Post
Did you check voltages off the board with a DMM Praz?
And if so, did you happen to note how much lower it was compared to CPU-z?
I used PC Probe/RC TweakIt for software monitoring running Prime95/Small FFTs with the 1090 at 4200MHz. The listed voltages are the highest I saw during a 15 second period. At the same time I captured the 15 second time with a scope. The measured voltages are the high and low values during that time. I can go back through my notes for other voltages if needed.


CPU Voltage (Set in BIOS - 1.49375):

Measured
Idle - 1.492 min, 1.500 max
Load - 1.532 min, 1.536 max

Displayed by software
Idle - 1.501
Load - 1.548


CPU/NB (Set in BIOS - 1.25000):
Idle - 1.252 min, 1.260 max
Load - 1.264 min, 1.268 max

Displayed by software
Idle - 1.250
Load - 1.290