Project Echo.

[josk1]

like the colors of your cable-sleeves, but not such a fan of the braids...

[iHannes]

The exciting part

It surely is!

like the colors of your cable-sleeves, but not such a fan of the braids...

Either you love it or hate it. I definitely like the new level to it.

[iHannes]

Bitspower products, sponsored by Coolingstuff

2x 45* adapter
3x 90* adapter
6x stop adapter






Fans sponsored by enermax












The reason of the dissmantle were to be able to have the "enermax" logo in the same direction as the "EkWb" logo. You can also see very well how much space a rad and fans take in this case.




EkWb watercooling components sponsored by.. wait for it ..EkWb!

CPU : EK Supreme HF
Pump : EK-DCP 4.0
RES : EK Multioption 250 RES
RAD : EK-CoolStream-RAD XT 240 | EK-CoolStream-RAD XT 120
Fittings : 14x EK-PSC Fitting 12mm - G1/4 Black
GPU : 5870 fullcover block + backplate
+ Feser one Coolingfluid sponsored by Coolingstuff.se






Be-Quiet SFX 350w PSU sponsored by Misco.se




Beginning to mount some hardware in the Fractal-Design Array (rev 2) Sponsored by no-one else but the eminent Fractal-Design

LC loop


The psu test mounted and with some experimental cablemanagement. I'm going to hide the cables alot more, that's my conclusion.






..And would you like a pen? :P





What's left to do?

# Plexiadapter for 3x2.5" SSDs/HDDs in the front
# Mounting and placing of the PSU
# Mounting and placing of eight white leds
# Pump switch, between EK 4.0 -> EK 2.2
# Reservoar switch between EK Multioption 250 -> EK multioption 250
# Plexi roof/top
# Cablemanagement
# Sleeve Leds, fans och pump
# Fill the LC loop with orange water
# New feets
# Switch radiatorgrill
# etc etc..

[ScottALot]

Ok now the cobra-tied sleeving is getting a little out of hand... the cables are simply dominating the case!

[iHannes]

Ok now the cobra-tied sleeving is getting a little out of hand... the cables are simply dominating the case!

I know, but snakes are hard to tame. I've reconsidered the cablemanagement and I'll not have them over the radiator, but under. Much better, and with the leds there you'll still be able to see 'em.

[ScottALot]

I think only some cables should be tied that way, not all of them.

[iHannes]

I think only some cables should be tied that way, not all of them.

All of them aint tied, just 24pin, 8pin and 2x6pin. ^^, That's 4/7 :3 But I hear you man.

[ScottALot]

Maybe don't do the 8 pins and 6 pins to highlight the great job you did on the 24-pin? Your choice, though, maybe the finished product will use your cables the right way.

[Johnny87au]

Maby cut off some of the cables to reduce the size and re sleeve em? Would be alot easier and less clustered..

[iHannes]

Maybe don't do the 8 pins and 6 pins to highlight the great job you did on the 24-pin? Your choice, though, maybe the finished product will use your cables the right way.

In that case I would not braid the 24pin, it is the hardest one to pull of and I'm not totally satisfied with the result of it. But I'll have to figure out just how I'm going to have the PSU first. It's not mounted yet. ^^,

Maby cut off some of the cables to reduce the size and re sleeve em? Would be alot easier and less clustered..

That's an idea, it's mainly the 24pin that's longer than needed. I'll see when the PSU is mounted how I'll do.

[glide 1]

i too am not a fan of the braides - otherwise your build looks sweeet

[Alexandr0s]

It's actually not that clustered, it's mainly the braiding that creates an amazingly clustered look. To put it simple: There's too much going in in those pictures.

I think shortening the cables is a good start, but I doubt it will remove the clustered look. The colors are okay, but maybe you could try a different type of braiding? Though I'm not sure which one you could use. Maybe experiment a bit with some sleeving?

[iHannes]

i too am not a fan of the braides - otherwise your build looks sweeet

Thanks man, the braiding is a bold thing to do, especially if I'm fishing "fans" or so to speak. I'm more into giving this an original style, blending in some different stuff to make this more than a PC. The braiding stays, in one way or another.

It's actually not that clustered, it's mainly the braiding that creates an amazingly clustered look. To put it simple: There's too much going in in those pictures.

I think shortening the cables is a good start, but I doubt it will remove the clustered look. The colors are okay, but maybe you could try a different type of braiding? Though I'm not sure which one you could use. Maybe experiment a bit with some sleeving?

I'm inlove with the 8pin and the two 6pin's, they're perfect in my eyes. Tho the 24pin atx cord is just . A different type of braiding would probably make it alot cleaner and by that change the clustered feeling into a more, stylish, clean, thoughtful cablemanagement.

I'm not talented in braiding what's so ever and therefor the atx24pin suffered. I'll learn (youtube here I come) and then I'll do something spectacular with it. I'm thinking weave. :-P

[ScottALot]

I don't think the cables will be as easy to work with as hair, but I await the results.

[Red-5]

Great looking build. I wasn't quite sure about braiding the cables but have to admit that it does look good in the pics from your last post. It's nice to see someone trying something a wee bit different. Look forward to seeing more mate.

[iHannes]

I don't think the cables will be as easy to work with as hair, but I await the results.

Great looking build. I wasn't quite sure about braiding the cables but have to admit that it does look good in the pics from your last post. It's nice to see someone trying something a wee bit different. Look forward to seeing more mate.

I'm definitly eager to pull this off.

[iHannes]

Some updates for you all! I've powder-coated it white and I really like the finish it gave it. This will also change the appearance of the build in all aspects, don't you think?









I'm sorry that I've not been around, but things have gone slow and I just powdercoated this thing last night. Anyways, I hope you like it!

[ScottALot]

Slow and steady wins the race! And that sweet paint job wins in my book.

[iHannes]

Slow and steady wins the race! And that sweet paint job wins in my book.

Thanks man. :-P It goes kind of slow. But I think it's progress at least. :-) I love how it turned out with the paint job. :-D

[Ced-G60]

Nice work

The probleme with those Enermax Fan when you invert the center part, the holes for the LED don't line up anymore and the effect is not as nice (I inverted 3 in my build)

[iHannes]

Nice work

The probleme with those Enermax Fan when you invert the center part, the holes for the LED don't line up anymore and the effect is not as nice (I inverted 3 in my build)

Thanks man. :-) I don't have leds in my fans so it's a non-issue. :-)

[miahallen]

Thanks for the update

[iHannes]

Your're welcome.

[Ced-G60]

Thanks man. :-) I don't have leds in my fans so it's a non-issue. :-)

Oh ok, only the white and transparent fan had led on them it look like, The black and red version don't have them, so no issue indeed

[iHannes]

Oh ok, only the white and transparent fan had led on them it look like, The black and red version don't have them, so no issue indeed

Non at all.