Last edited by shazza; 08-28-2010 at 10:29 PM. Reason: quoted pics changed to links
Intel Xeon W3520 4200MHz HT
Foxconn Bloodrage
3x2Gb Patriot Viper II DDR3-1600 6-6-6-16
MSI GTX480 M2D15 850/1700/2000
Samsung F1 1TB
Corsair TX950W
Stacker 832 w/ Dual Loop Watercooling aka *Bong Build*
NEC 2690WUXi
Loop 1: Laing DDC1-T -> Watercool HK 3.0 LT -> Thermochill PA120.3 -> Bloodrage NB -> EK Res 150
Loop 2: Laing DDC1-T -> EK-FC GTX480 -> Thermochill PA120.2 -> EK Res 150
*New* CM 690 II Advanced Watercooled
*Coming soon* Stacker 832 Rebirth!
^^I agree, that is a very nice looking setup. The only improvement that I can think of is if the cables were individually sleeved....then it would be perfect IMO.![]()
Asus Rampage IV Extreme (Cooled by EK)
3930k (still dialing it in) (Cooled by: summer time= HeatKiller / winter time= ss phase)
Samsung 30nm 32gig (still dialing it in)
2x GTX 590 Quad-SLI (Cooled by XSPC)
128GB Crucial SSD
1200w PCP&C
Another improvement: getting better rad fans... CM R4s aren't the best with static pressure.
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
Here's the Black Widow
EVGA 4-way Classified WC'd, i7 980x w/EK HF, 6GB Dominator GT 2000MHz, EVGA GTX480 x4 w/EK-FC WB's, OCZ Vertex 2 120GB, WD CB 1TB, LG Bluray writer, Silverstone Strider1500, HAF X.
^^^
OH.
MY.
GOD.
...will it run Cry... oh nvm.
^^ that is one awesome setup you have there kruzn4evr. I hope that mine turns out as nice looking as yours does.
Asus Rampage IV Extreme (Cooled by EK)
3930k (still dialing it in) (Cooled by: summer time= HeatKiller / winter time= ss phase)
Samsung 30nm 32gig (still dialing it in)
2x GTX 590 Quad-SLI (Cooled by XSPC)
128GB Crucial SSD
1200w PCP&C
kruzn4evr, that's something to look at![]()
i7 950@4.05Ghz HeatKiller 3.0
EVGA E762 EK WB | 12Gb OCZ3X1600LV6GK
Razer Tarantula |Razer Imperator | SB X-Fi PCIe
480GTX Tri SLi EK WBs | HAF X | Corsair AX1200
____________________________________________
Loop1: Double_MCP655(EK Dual Top) - MoRa3Pro_4x180 - HK3.0 - EKFB_E762
Loop2: Koolance_MCP655(EK Top) - HWLabsSR1_360 - EK_FC480GTX(3x)
@kruzn4evr what kind of SLI water block connectors are those?
Asus Rampage IV Extreme (Cooled by EK)
3930k (still dialing it in) (Cooled by: summer time= HeatKiller / winter time= ss phase)
Samsung 30nm 32gig (still dialing it in)
2x GTX 590 Quad-SLI (Cooled by XSPC)
128GB Crucial SSD
1200w PCP&C
kruzn4evr your hardware is undoubtedly godly and you definitely took alot of time with the cabling/tubing but for fracks sake please put it in a worthier case!!! That HAF X and teetering radiator bracket are eyesores. That type of hardware belongs in a 800D, TJ07 or a custom enclosure.
4x 480s jeebus, Hows your temps ?
Another thing I find funny is AMD/Intel would snipe any of our Moms on a grocery run if it meant good quarterly results, and you are forever whining about what feser did?
No way. These http://www.auzentech.com/site/products/case.php are MUCH uglier than an 800D, the 800D is too bland to be ugly![]()
CoolerMaster Stacker STC-T01 | Gigabyte P45-UD3P | Q9550 @ 4GHz 1.30v | 2x2GB G.Skill 8500 | Gigabyte 6950 Flashed to 6970 | Auzentech X-Fi Forte | Seasonic x-750
Loop 1:Laning DDC3.2 XSPC Res Top, Swiftech GTZ & MCR 320
PetrasTech.comR.I.P.
Team Group Ram![]()
800D is stylish with clean classic lines, not bland. And heaps better then many plastic overdesigned cases which frankly look cheap in comparison. You don't need carbon fiber wing, full body kit and stickers for rolls royce, you buy expensive wine to put in trunk![]()
Thanks for the comments guys, first off, the 800D and TJ07 wouldn't work (maybe with some serious modding), I choose the HAF X simply because it was the best case of choice that has 9 expansion slots that holds the 4-way Classy board, I almost went with a MM but between price and sheer size (I wanted something not so huge) the HAF was really the only choice. As for the "teetering" rad bracket, its as solid as a rock and really the only way to go for a rear mounted quad rad.
The SLI connectors are Bitspower C-07 D-Plugs which again were IMO the best part for the job and look quite nice to boot. Temps for the cards are pretty good, all 4 are approx. 32-34c idle and hit around 62c with Furmark, real life temps while gaming etc. they never go over 53-54c, I'm looking at adding a triple rad on top in the next few days when I can get the time. They scored pretty nice on Vantage toohttp://www.evga.com/modsrigs/TopRating.aspx
You need to put more money into that build [/Sarcasm]
Signatures make my posts look huge... but I'm not humble enough to completely remove my signature, so I kept this note explaining it.
Look here
The craftsmanship is pristine and it comes pre painted/coated. I have one waiting in a box for my case to be finished at the powder coaters.
^^ can you post a pic of what you are linking to....I can't get into that area of the site.
Asus Rampage IV Extreme (Cooled by EK)
3930k (still dialing it in) (Cooled by: summer time= HeatKiller / winter time= ss phase)
Samsung 30nm 32gig (still dialing it in)
2x GTX 590 Quad-SLI (Cooled by XSPC)
128GB Crucial SSD
1200w PCP&C
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Asus Rampage IV Extreme (Cooled by EK)
3930k (still dialing it in) (Cooled by: summer time= HeatKiller / winter time= ss phase)
Samsung 30nm 32gig (still dialing it in)
2x GTX 590 Quad-SLI (Cooled by XSPC)
128GB Crucial SSD
1200w PCP&C
His thread
Below is not my photo I don't take any credit for this photo.
Shape of ram heatspreaders looks just right near HK3. I wonder if it's worth looks-wise to paint cpu wb mounting plate and middle black and copper parts red to make those looks even more similar.
Bookmarks