Hi Guys, I get an error with trying to back up my bios on my 480. The message is bios reading not supported. I have seen a fix for this but it's for ATI cards, and the version is 0.4.3. Have any one you guys seen this and fixed it?
Thanks,
Hodgy.
Hi Guys, I get an error with trying to back up my bios on my 480. The message is bios reading not supported. I have seen a fix for this but it's for ATI cards, and the version is 0.4.3. Have any one you guys seen this and fixed it?
Thanks,
Hodgy.
Case, 800D,
Windows 7 Ultimate 64bit,
M/B, Asus RE3, EK-FB,
CPU, i7 980x, WC Corsair H50,
RAM, Corsair CMG6GX3M3A2000C7,
GPU 1, Asus GTX 480, SLI WC EK-FC480,
GPU 2, EVGA GTX 480, SLI,
GPU 3, EVGA GTX 260 Physx,
PSU,Corsiar 1000HX,
HD, VelociRaptro 150gb Raid0, WD Caviar Blue 1tb
Latest GPUz is 0.4.5. Try it.
BTTB - Gigabyte Z87X-OC - WCed I7 4770k - 2x8gb Ballistix 1600mhz - Zotac GTX 780
Asus Xonar Pheobus - OS -> Toshiba Q 256gb - Games -> 2x Agility 4 256gb Raid0
Corsair HX850 - Tecnofront HWD BenchTable - Asus VE278Q 5760x1080
Serveur - Asus Z77m PRO - 2500K - NH-C12P - 4x4gb G.Skill Ares 1600mhz
Agility 4 128gb - Corsair CX430M - 1TB Black - 2TB green - 2TB Red
KatPat - Gigabyte 990FXA-UD3 - FX-8320 - PH-TC14CS - 2x4gb Viper 1600mhz - GTS 450
Samsung Evo 120gb - Corsair HX750 - Bitfenix Survivor White - Asus VE247H
Just watercooled my MSI N470GTX. Useless on air, 89c steady temp stock with peaks up to 94c til the fan catches up. Made the room smell like a hairdryer.
Hasn't done as much for my core overclock as i'd hoped, but I think I just got a crap gpu core (1050mv vid). Previous best in furmark was 766/1533/1900 @ 1037mv, gaming best was 800/1600/1674 @ 1087mv but I couldnt go near furmark due to temps.
Now I can do 850/1700/2050 @ 1137mv with furmark load in the low to mid 40s. Memory clock gain was 150mhz+, but you can't beat a dead horse and my gpu just won't keep up. 866/1733 takes 1175mv and 875mhz Blue/grey/black screens in Vantage @ any voltage up to 1212mv.
Still, happy with card, performance at 850/2050 is excellent and its now quiet and cool too. First foray into the bling factor and I keep catching myself oggling at that backplate while im sitting here.
![]()
Optional - £17 extra. I told myself it stiffens the card and gives extra support for the waterblock.
Maximus 5 Gene | i7-3770K @ 5GHz | ADATA 2x2GB @ 2.6GHz 9-12-10-28-1T | HD7970 @ 1200/6400
Rampage 4 Extreme | i7-3930K @ 5GHz ||| X58-A OC Orange | i7-980X @ 4.6GHz
Case, 800D,
Windows 7 Ultimate 64bit,
M/B, Asus RE3, EK-FB,
CPU, i7 980x, WC Corsair H50,
RAM, Corsair CMG6GX3M3A2000C7,
GPU 1, Asus GTX 480, SLI WC EK-FC480,
GPU 2, EVGA GTX 480, SLI,
GPU 3, EVGA GTX 260 Physx,
PSU,Corsiar 1000HX,
HD, VelociRaptro 150gb Raid0, WD Caviar Blue 1tb
Hehehe - guilty as charged.
My photographic "ability" just doesnt do the block justice, it looks twice as good in person.
Hi guys, any news about lod adjustement? now is possible?
Sup Guys , I just purchased a new Evga 480 GTX and it black screens within minutes of any 3D app. So I loaded up MSi Afterbuner and temps just in 2D was at 95C and 3D went to 103C+ with Kombuster before I stopped it so not to black screen in test. That normal? I did already fell out an RMA because umm to me that's not normal. Just wondering what you guys thought as well I normally use ATI/AMD cards. Thanks
* My Case Labs STH10 Build Log *
Computer System:
CPU = Intel i7 3770K
MOBO = Asus Maximus V Extreme
GPU = EVGA GeForce GTX 480 @ 880MHz|1760MHz|4200MHz @ 1.125v
RAM = 8GB Dominator GT's
SSD = Samsung 830 Series 256GB
PSU = SeaSonic X-1250W
SC = X-Fi Fatality Pro
CASE = Case Labs STH10
LCD = NEC MultiSync 1970GX 19"
OS = Windows 7 Ultimate 64-bit
Watercooling System:
CPU = EK Supremacy Nickel+Acetal
GPU = EK FC-480 GTX Nickel+Acetal
MB = EK-FB Asus M5E Nickel+Acetal
RES = EK-RES X3 250
PUMP = Dual Koolance PMP-450's w/ EK-D5 Dual Top CSQ
RAD = Dual HWLabs SR-1 560's w/Gentle Typhoon 1850rpm Fans
LIQUID = Distilled Water w/Petra's Pure Silver Killcoil
Well atm I camping lol but motherboard evga 760 x58 cpu @4.0 case azza. I have a yate medium fan blowing right at the card and had fan speed set to 100 and still 95c in 2d. Sorry but typing on my droid.
Doubt it. Maybe a tiny bit, but probably not.
That is absolutely not right. Your temps are way to high. Mine averages 42c Idling with fan on auto averaging 44% and 25.5c ambient room 30c ambient case. At stock speeds/voltage (700/1400/1848) with 99% load fan ramps up to 70% and hovers at 84c after 30 min with same ambient temps. From what I've seen reported, by other users/reviews this is average and what you should expect under normal circumstances. I would check your fan and intake ports for rpm and obstruction. My GPU fan runs 1683 RPM @ 44% AND 4703 RPM @ 100% as reported by Everest Ultimate OSD.
I hope this helps!
roki977 what voltage for that 950mhz???
Congrats for that OC. awsome.
Last edited by amlett; 09-08-2010 at 12:22 AM.
1.21 under LN2 with no mods. Card really likes sub zero temp. It can probably go higher, but I did not have enough Ln2. Memory needs to be heated up during ses...problems with freezing memory
Thanks for the input. Good job!
Did you have any trouble with the OCP?
Mine kicks me off after 860mhz and 1.13v.
Last edited by Darkstormz; 09-08-2010 at 07:50 AM.
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
Amlett - same for me. Black / grey screens - even had a pink one once. Lower volts, artifacts, raise volts display cuts out.
VR-Zone has the ocp mod which is tempting me.
For people who have GTX470 is the normal temperature reaches 107ºC playing any game? Before I used to overclock 800/1600/1900MHz (mV 1.037v), temperature was 107 º C playing, stability test (Kombustor) the same 107º C.
Now I degrades the clocks to 750/1500/1800MHz (1.013v) and the temperature remains at 107º C playing, same for stability test.
PS: That I've changed the thermal paste on the video card, I used the Arctic Cooling MX-3 for the GPU. Temp Idle 38ºC (gpu). Room Temp 30~32ºC.
My English is not the best, hope you understand.
Thanks!
Last edited by _AntLionBR_; 09-08-2010 at 11:25 AM.
My rig: [i7-990X ES w/AC MX-4 @ 4.5GHz by Prolima Super Mega / Fox x58 BloodRage P11 / Sapphire CFX HD 7970 OC
A-Data v2.0 2200MHz C8 / A-Data v2.0 1866MHz C8 / Dom.GT 2000C7GTF / Kingston 2000MHz D3T1K3/6GX (All IC Hypers)
Plextor M5S 128Gb Raid0 / WD 4x VelociRaptor 300Gb (10K) WD3000HLFS / Asus Xonar Essence STX / Seasonic 860 Platinum
Cooler Master Cosmos II UT w/10x Noctua P12 fans + 2x P14 FLX + 2x Scythe GT P-15 (1850) / BenQ XL2420T 24" 120Hz
S&S 6g, 7H, Sensei Rubber, 9HD, QcK / Tt Meka G1 / Logitech G5 v2 / Razer Destructor / Puretrak Talent / Senn HD598]
*My English![]()
Workstation >>> ASUS P8P67 WS Revolution :: Intel Core i7 2600K @ 4.5GHz - 1.29v :: 16GB Corsair Vengeance 1600MHz CL8 :: ASUS GTX 580 DIRECTCU II :: Creative X-Fi Titanium HD :: 80GB Intel X25-M G2 :: 4 x 150gb Velociraptor [RAID-0] :: 1TB Western Digital Black
Laptop >>> MSI GX740 :: Intel Core i7 920XM :: 8GB Kingston HyperX CL9 :: Radeon 5870M @ 800MHz - 0.98v :: 160GB Intel X25-M G2 :: 500GB Western Digital Scorpio Black @ OBHD
Bookmarks