PHENOM II AM3/DDR3 Ram Overclocking List

**sam3** · 08-20-2010, 08:30 AM

Sam3 |923Mhz | x6 1090t 4039mhz | 7-8-7-24 1T | 1.74v | 2x2GB G-Skill Tident DR3-2000 CL9 | ??? | Asus Crosshair IV | 890FX | Link

Heres mine, Its my everyday machine so nothing extreme

**stangracin3** · 08-20-2010, 08:39 AM

you need to crank that northbridge to atleast 2700

**Barr3l Rid3r** · 08-20-2010, 08:53 AM

Originally Posted by Barr3l Rid3r

enough benefit or just 1C in load temperatures?

Crazy? __

**crazydiamond** · 08-20-2010, 10:43 AM

idk exactly how much improvement but with my water cooling (3x120 worth of rads + high fpi + high cfm), 1.55v is around 55c. 2x120 rad i would imagine pushing at least 60c. i would do 3x120 worth of rads

**wez** · 08-20-2010, 11:23 AM

Originally Posted by Barr3l Rid3r

enough benefit or just 1C in load temperatures?

This is a 965 running 4.1ghz 1.55v, single 3x120 against two 3x120 rads w fairly quiet fans in push/pull

A reasonable boost if you ask me

**Barr3l Rid3r** · 08-20-2010, 03:37 PM

Originally Posted by wez

This is a 965 running 4.1ghz 1.55v, single 3x120 against two 3x120 rads w fairly quiet fans in push/pull

A reasonable boost if you ask me

but thats 5c adding 3x 120 more , so adding 1x of 120 more i will have an 1.6c improovement?

**crazydiamond** · 08-20-2010, 04:33 PM

thats only x4,,, x6 will see more benefit. my x4 & x6 both at 1.55v have 10c difference in load temps (x6 hotter obv.).. its up to you dude but if it was me building another x6 rig & planning on pushing 1.55v+ gotta be at least 3x120 IMO

**Barr3l Rid3r** · 08-21-2010, 07:39 AM

nice, so im goint to try that. thanks

**m0n4g3** · 08-21-2010, 11:01 AM

Guys, just remember that surface area is just as important as fan choice.

I went from the coolermaster 120mm 60cfm fans to the scythe sfles 1900rpm 110cfm ones, and i've dropped like 10c and that's going from a 940be to a 1090t aswell!

Mind you i did change water blocks aswell but ah well. :P

BTW!

THANKS chew*

If i ever see you in person, i'm soooo buying you a beer!

Finally cracked the 3000mhz CPU-NB!

managed 3010 @ 1.45v, but anymore and it don't like it. Just doesn't even boot up. Might need lower temps or something not sure...

i suppose for 24/7 3010 is reasonable.

**Sanousie** · 08-21-2010, 03:44 PM

Here is my new result with the updated F7 bios for the 890GPA-UD3H, G.skill trident F3 Dualchannel kit 2000mhz 2x2gb

Click to view full size!
Still tweaking, Cooled via cascade.

**Dnomi** · 08-22-2010, 09:36 AM

Just for fun - I do not and will not run superpi on my computer, its a very old I386 program of no importens today.

AX3U2000XB2G9-2X <-- Cheap memory

CL9: http://dnope.dk/download/file.php?id=13&mode=view
CL8: http://dnope.dk/download/file.php?id=11&mode=view

chew* · 08-22-2010, 02:12 PM

Originally Posted by Dnomi

Just for fun - I do not and will not run superpi on my computer, its a very old I386 program of no importens today.

AX3U2000XB2G9-2X <-- Cheap memory

CL9: http://dnope.dk/download/file.php?id=13&mode=view
CL8: http://dnope.dk/download/file.php?id=11&mode=view

the purpose of running it is to set a guidline for stability and nothing more.

**Dnomi** · 08-22-2010, 02:40 PM

chew - I made this screenshot a few weeks ago, i could make a new one - But naa.. It is only for fun

**Cele303** · 08-22-2010, 04:11 PM

My first hands on Gigabyte 890FXA-UD5, Giga looks good so far, Noctua NH-D14

**Barr3l Rid3r** · 08-23-2010, 09:57 AM

Very nice result, wich wonderful ram is that and how many Voltage for this?

**Ccaution** · 08-23-2010, 10:58 AM

Same questions here...! Ooohhh, and what batch is that badboy?

**mrcmtl** · 08-23-2010, 11:48 AM

2x4GB G.Skill Flare DDR3-2000 8-9-8-24 1.65V. Nothing fancy.

Uploaded with ImageShack.us

**Ccaution** · 08-23-2010, 12:04 PM

Nice - but give that HTLink a better multi mate

**Cele303** · 08-23-2010, 12:06 PM

Originally Posted by Barr3l Rid3r

Very nice result, wich wonderful ram is that and how many Voltage for this?

Originally Posted by Ccaution

Same questions here...! Ooohhh, and what batch is that badboy?

Dominator GT CM*** 1866 7-8-7-20, 3x2GB kit... 1.75V used but that's not their best they can hit for 32M with 1.75V, it is too hot now, I need ac in my office at work, no ac at home, 4504MHz crash at loop 18

Batch is 1021APMW, retail...

Best 6-6-5-15 1.75v Big Typhoon at winter

**FlanK3r** · 08-23-2010, 01:23 PM

nice Cele, this is my loved aircooled Thuban

, im so lazy tweaking more RAM :-D

**Cele303** · 08-24-2010, 12:04 AM

wow Flanker, I'm out of AMD lately but that looks like great chip you got there, is that 21°C spring temp or ac room?

**FlanK3r** · 08-24-2010, 11:21 AM

hehe, its ambients in room. Outside spring temps was +- simillary think, dont remember now exactly :-). And yes, this chip is hell! Great chip, 3D Mark 05/06 at more than 4400 MHz! I can try at October hit about 4900 MHz validation :-) (max with 1.55V)

**sam3** · 08-25-2010, 03:25 AM

Originally Posted by stangracin3

you need to crank that northbridge to atleast 2700

Thanks for the tip

Just tried it and it knocked 27 seconds of my superpi time

**HanaJetso** · 08-25-2010, 07:16 AM

HanaJetso | 813Mhz | 1.62v | 6-6-6-15 1T | x4 955 @ 3.9g | 2x2GB supertalent DDR3-2200 | Elpida Hyper | GA 790XTA-UD5 | 790FX |

**crazydiamond** · 08-25-2010, 08:42 AM

nice, what ram & volts?

Thread: PHENOM II AM3/DDR3 Ram Overclocking List

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions