Chew, how much RAM voltage for this? I have 1.625V and 1700 MHz 7-7-7-21-1T (low heatsink passiv at RAMs, A-DATA 2000X). Do u think, can i higher with RAM voltages for 24/7? Want about 1800 MHz cl7...Thx
Chew, how much RAM voltage for this? I have 1.625V and 1700 MHz 7-7-7-21-1T (low heatsink passiv at RAMs, A-DATA 2000X). Do u think, can i higher with RAM voltages for 24/7? Want about 1800 MHz cl7...Thx
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
ok, il try max with about 1.7, i hope 1750 MHz cl7 is possible
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
Chew, thanks for the story. It is much harder than I thoughtIt is easy to get angry if other call you lucky.
Vishera 8320@ 5ghz | Gigabyte UD3 | 8gb TridentX 2400 c10| Powercolor 6850 | Thermalight Silver Arrow (bench Super KAZE 3k) | Samsung 830 128gbx2 Raid 0| Fractal case
chew im not discrediting your hard work by any means, or saying you havent earned all your hardware. im just saying that when you come in saying how easy it is, or how bad peoples internal timings are, etc., might not always be the best way to put it since your comparing your best results from heaps of hardware to someone who has 1 rig. thats all. dont get me wrong, i love seeing what you can do, i just dont care for it when its used to down credit someone elses hard work. no harm bro,, and as always, lookin forward to more results. feel free to pm me if you want to talk more, we'll leave this thread for good ram results
and to help stay on topic, my best 32m on these supertalent 2200c8
1790mhz 6.6.6 - 1.735vdimm in bios
![]()
Last edited by crazydiamond; 08-18-2010 at 12:22 PM.
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
Sometimes you misinterpret what i'm trying to say.
Internal latencies of a board you can not tune.
So when i say that internal latencies are looser it's becasue that board is running slack aka less performance per clock to acchive a higher speed........come on 6-6-6 2000?
Look at the hwbot maxxmem comp, massman beat that 6-6-6 2000 run at 1940 with MSI![]()
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Not bad for air...
![]()
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Please update the scores
I'll come back for more once i get my hands on an X6.
Last edited by Barr3l Rid3r; 08-19-2010 at 04:58 PM.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
equinox1 , 938 mhz , 7-7-7-24 1t , 1.685v , 4689mhz cpu , 2x2gb corair dominator gt's , asus m4a89td pro , 890fx
winxp 64 bit chilled water
and for the interesting part of the chart
equinox1 , 979 mhz , 7-7-7-24 1t , 1.685 , 2x2gb corsair domnator gt , asus m4a89td pro , 890fx , 4774mhzcpu
spi1m nor spi32m will work on these settings in winxp 32 bit but wprime32 and wprime1024 work fine. strange?
Last edited by chew*; 08-19-2010 at 10:41 PM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
What's your guys secret for 3000+ CPU-NB speeds.... i just can't seem to get 3000+ working on my cpu
Temps are roughly 18C ambient with water loop in sig?
PII x6 1090T @ 4.03ghz @ 37C Load | MSI 890FXA-GD70 | Asus EAH5870VT | Corsair Dominator GT DDR3 1600C7 | Western Digital Raptor 36gb x2 RAID 0 | Coolermaster HAF-932 | Swiftech MCP650, EK Supreme-HF, MCPRES-4 and 1/2" tubing
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
www.teampclab.pl
MOA 2009 Poland #2, AMD Black Ops 2010, MOA 2011 Poland #1, MOA 2011 EMEA #12
Test bench: empty
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
im wonder, what will happen in winter days...4900 MHz for me think. Im using better now lower voltage 1.2V CPU-NB and 2800 MHz its ok :-)
ROG Power PCs - Intel and AMD
CPUs:i9-7900X, i9-9900K, i7-6950X, i7-5960X, i7-8086K, i7-8700K, 4x i7-7700K, i3-7350K, 2x i7-6700K, i5-6600K, R7-2700X, 4x R5 2600X, R5 2400G, R3 1200, R7-1800X, R7-1700X, 3x AMD FX-9590, 1x AMD FX-9370, 4x AMD FX-8350,1x AMD FX-8320,1x AMD FX-8300, 2x AMD FX-6300,2x AMD FX-4300, 3x AMD FX-8150, 2x AMD FX-8120 125 and 95W, AMD X2 555 BE, AMD x4 965 BE C2 and C3, AMD X4 970 BE, AMD x4 975 BE, AMD x4 980 BE, AMD X6 1090T BE, AMD X6 1100T BE, A10-7870K, Athlon 845, Athlon 860K,AMD A10-7850K, AMD A10-6800K, A8-6600K, 2x AMD A10-5800K, AMD A10-5600K, AMD A8-3850, AMD A8-3870K, 2x AMD A64 3000+, AMD 64+ X2 4600+ EE, Intel i7-980X, Intel i7-2600K, Intel i7-3770K,2x i7-4770K, Intel i7-3930KAMD Cinebench R10 challenge AMD Cinebench R15 thread Intel Cinebench R15 thread
might try a 1.425v run a lil later although i beleive i have tried this without much luck but we will see.
Thanks for the advice chew*!![]()
PII x6 1090T @ 4.03ghz @ 37C Load | MSI 890FXA-GD70 | Asus EAH5870VT | Corsair Dominator GT DDR3 1600C7 | Western Digital Raptor 36gb x2 RAID 0 | Coolermaster HAF-932 | Swiftech MCP650, EK Supreme-HF, MCPRES-4 and 1/2" tubing
2000C6 is nice? what board, ram and cooling for this? Mine could go further but my mobo doesn't allow me, I have to use use it at Ganged mode to go above 1750Mhz on it.
that 1800Mhz C6 is done w/ 1.70 on air.
2 Doubts:
1-) Do you think a WC will help me w/ the RAM OC?
2-) SPI32mb is a single thread or multi-thread benchmark? Should I set affinity to only one CPU for better results?
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Gigabyte you will likely hit a wall at 1880 unganged if thats what your using in your sig, however i have not used the UD5 so I can not confirm.
Board was CH4F
Cooling was water, ram was air.
Do I think water cooling will help? yah sure the cooler you can run the less stress on cpu. Too cold bugs IMC, but we are talking -80 and colder.
SPi yes is single threaded, run on one core, even try disabling cores and finding your best core but never less than 2 cores so windows has something to offload on![]()
Last edited by chew*; 08-20-2010 at 05:54 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
That sounds like a lot of work, lets just stick w/ that 1800mhz run for a while.
1880MHz wall? I think that more like IMC dependant.
at 1720mhz mine ram isn't stable at 1.65v unganged but it is at 1750mhz ganged, so thats very fun to understand, NB can reach lower clocks on ganged mode also.
Another thing, I ordered some MCP 655 + Ek Supreme HF + XSPC RX240 and some 1/2 fittings. That's just for the CPU, Do you think a MCR120 in the same loop will help me or just add some restrictions? I intend to do something like this: MCP655> RX240>CPU>MCR120>MCP655
Last edited by Barr3l Rid3r; 08-20-2010 at 06:07 AM.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
Last edited by Barr3l Rid3r; 08-20-2010 at 07:19 AM.
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
I doubt it will make a diff but i don't keep up with times or do normal water cooling myself. I used a 3x120mm and a ln2 pot conversion to massive waterblock no res just oldschool T-line. It's preety untouchable in load apps.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
for x6 i recommend at least 3x120 worth of rads for 1.5v+... rads are hardly restrictive so cpu only loop adding a rad will have benefit as long as they are both getting fresh air
also barrel, the 2000c7 might be a tiny bit better than 2200c8, but your c8's look pretty nice. not worth trying to upgrade IMO
Last edited by crazydiamond; 08-20-2010 at 08:12 AM.
LEO!!!! amd phenom II x6 1100T | gigabyte 990fxa-ud3 . . 2x2gb g.skill 2133c8 | 128gb g.skill falcon ssd sapphire ati 5850 | x-fi xtrememusic. . . samsung f4 2tb | samsung dvdrw . . corsair tx850w | windows 7 64-bit. ddc3.25 xspc restop | ek ltx | mc-tdx | BIP . . lycosa-g9-z2300 | 26" 1920x1200 lcd .
990FXA-UD3 | FX8350@4.7Ghz | Asus HD7870 | 2x 4GB Crucial Ballistix Tracer 2050Mhz 8-8-8-22 | AX850W |SSD Vertex3 Max IOPS 120GB | Auzentech Forte + TAPCO-S5
EK Supreme Full-Gold | XSPC RX240 + EX120 | MCP35x | 3x Koolance Blue Led @PWM | Tygon Black 1/2 | Bitspower Compression | @ FM CM690 I
Bookmarks