CPU Model: AMD Phenom II X6 1090T BE
* CPU Stepping: 1022BPMW
* CPU Frequency: 4050 MHz
* CPU vCore: 1.45V idle, 1.488V load
* CPU NB Voltage: 1.25v
* CPU Multiplier: 15x
* CPU Turbo: Disabled
* CPU NB Speed: 2700 MHz
* HT Ref Speed: 270 MHz
* RAM Speed: DDR3-1485
* RAM Timings: 9-9-9-24-1T
* RAM Configuration: 4 GB (2 x 2 GB)
* RAM vDIMM: 1.5V
* Motherboard: Crosshair IV bios 905
* Cooling: 'Water' - Modded Corsair H50
* Temps: Idle 26-28C(basically ambient room temp), Load 54C Core, 75C Socket
* Operating System: Windows Vista
* 32/64-Bit: 32
* Stable/Suicide/Untested: 8 hour blend stable

Just wanted to get in my stable setting before tweaking for slightly more speed or whatever I can manage out of the system. I'll probably need to upgrade the cooling to get much farther just because of the throttling I've run into. I think that's because when I had the vapo on before it died I needed to put paste in the socket and that may be adding some heat.