This is my Gigabyte GTX 460 1GB under stock Voltage of 975mV,
the memory will go a little higher but the core clock won't, even if i go up to 1.081V. I've already reapplied the thermal paste on the card.
Asrock Z68Extr4Gen3
Intel I7 3770k OC:4500Mhz(100.1*45)(Offset -0.20v)
Geil evo corsa DDR3-2133 CL11 16GB
Sapphire R9 290 Arctic Accelero Hybrid
Samsung 830 + 840 120gb Windows 8.1 pro
Creative Sound Blaster X-Fi Titanium Fatal1ty Professional
Thermaltake Chaser MK-1
Be Quiet Dark Power Pro 850W
Swiftech H220
I don't know why but even in reviews Zotac 1gb card was the hotest. The EE heatsink used by Evga and Zotac is worst than reference. And you have a problem with fans , you must flash a new bios to unlock them to 100%.Under full load via F@H. My top card is dying. Very close to breaking 100C w/ the top card. The cooling on the Zotac 1GB cards is rather poor. I need to buy waterblocks for these bad boys asap. My Gigabyte GTX460 768MB card will do the same clock easily enough as well. I just don't have room for the card until my motherboard gets back from RMA.
Two Gigabyte cards should have been a little better.
i5 2500K@ 4.5Ghz
Asrock P67 PRO3![]()
P55 PRO & i5 750
http://valid.canardpc.com/show_oc.php?id=966385
239 BCKL validation on cold air
http://valid.canardpc.com/show_oc.php?id=966536
Almost 5hgz , air.
"Prowler"
X570 Tomahawk | R7 3700X | 2x16GB Klevv BoltX @ 3600MHz CL18 | Powercolor 6800XT Red Devil | Xonar DX 7.1 | 2TB Barracuda | 256GB & 512GB Asgard NVMe drives | 2x DVD & Blu-Ray opticals | EVGA Supernova 1000w G2
Cooling:
6x 140mm LED fans, 1x 200mm LED fan | Modified CoolerMaster Masterliquid 240
Asrock Z77 thread! | Asrock Z77 Extreme6 Review | Asrock P67 Extreme4 Review | Asrock P67 Extreme4/6 Pro3 thread | Asrock Z68 Extreme4 thread | Asrock Z68 Extreme4 Review | Asrock Z68 Gen3 Thread | 8GB G-Skill review | TK 2.ZERO homepage | P5Q series mBIOS thread
Modded X570 Aorus UEFIs
Bookmarks