Page 41 of 53 FirstFirst ... 313839404142434451 ... LastLast
Results 1,001 to 1,025 of 1304

Thread: Quad socket board communitarian bulk buy

  1. #1001
    Registered User
    Join Date
    Sep 2009
    Location
    Indonesia very near to Borobudur Temple
    Posts
    31
    Quote Originally Posted by shoota View Post
    Yes sir.



    Yes same board but that total is more than most of us paid. I think all told mine was around $500.

    I am not lucky I think

  2. #1002
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    Motherboard $189? Holy cow. We paid a tad under $100 for ours.
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

  3. #1003
    Xtreme Cruncher
    Join Date
    Dec 2005
    Location
    L.A. ( Latin America)/ 4socket wannabe
    Posts
    2,756
    Quote Originally Posted by metalop1g View Post
    Should I create it in the wamps or in the wcg section? It's gonna be edited loads of times so i don't want to annoy anybody..
    Go for it , thanks

    We might do another buy in the future. in case we happen to make it real the thread would become double useful
    "Study hard my young friend"[/B].
    ---------------------------------------
    Woody: It's not a laser! It's a... [sighs in frustration]

  4. #1004
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Quote Originally Posted by Rembulan View Post
    I am not lucky I think
    I don't know about unlucky but certainly bad timing. our seller was called rakicomputers. maybe you could email him and see what he can do for you.
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  5. #1005
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Quote Originally Posted by Duh View Post
    Go for it , thanks

    We might do another buy in the future.
    i vote for me to not be the hub next time

    I've been meaning to thank all of you for your patience, and most of all, your trust. This really made me feel part of the team and i had a great time doing it. I think after this week I'm going to have to tune down the crunching. The electricity bill is just way to high now that i'm going back to school. I think i'll just run the quad Anyways, enjoy the boards guys and get them crunching for Team XS!
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  6. #1006
    Xtreme Cruncher
    Join Date
    Dec 2005
    Location
    L.A. ( Latin America)/ 4socket wannabe
    Posts
    2,756
    thank you shoota
    "Study hard my young friend"[/B].
    ---------------------------------------
    Woody: It's not a laser! It's a... [sighs in frustration]

  7. #1007
    Registered User
    Join Date
    Sep 2009
    Location
    Indonesia very near to Borobudur Temple
    Posts
    31
    Quote Originally Posted by shoota View Post
    I don't know about unlucky but certainly bad timing. our seller was called rakicomputers. maybe you could email him and see what he can do for you.
    Sure I will do it

    Quote Originally Posted by Duh View Post
    Go for it , thanks

    We might do another buy in the future. in case we happen to make it real the thread would become double useful
    I am interested.

    Btw This arima board have Nvidia chipset did somebody from this thread try use Nvidia Ntune to do OC for this board ? is that work ?

  8. #1008
    (o.O)
    Join Date
    Jun 2008
    Location
    Ohio
    Posts
    1,285
    Quote Originally Posted by shoota View Post
    i vote for me to not be the hub next time

    I've been meaning to thank all of you for your patience, and most of all, your trust. This really made me feel part of the team and i had a great time doing it. I think after this week I'm going to have to tune down the crunching. The electricity bill is just way to high now that i'm going back to school. I think i'll just run the quad Anyways, enjoy the boards guys and get them crunching for Team XS!
    thanks for handling it all, shoota. I've done similiar things in the past for other forums and I wouldn't wish that job on anyone it's for the most part thankless and can be a real headache...

    but you did a great job with it
    Intel Core 2 Quad Q9450 Yorkfield @ 3.2GHz | Asus P5Q Deluxe mobo | 2x OCZ Reaper HPC 4GB (2 x 2GB) DDR2 1066 (PC2 8500) | Sapphire 4870x2 | Western Digital VelociRaptor 300GB 10k RPM | Intel 120GB SSD | Western Digital Caviar SE16 640GB 7200 RPM | Hitachi 2TB 7200 RPM | PCP&C 750W Power Supply |Cooler Master HAF932 | Windows 7 64-bit | Dell ULTRASHARP 2408WFP 24-inch Widescreen Flat Panel Monitor

    Join Us in the XS World Community Grid Forum & Help Fight Cancer and Other Diseases

  9. #1009
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Thanks a bunch Rise, means alot to me.
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  10. #1010
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Quote Originally Posted by gongo View Post
    It eats up your time, it can be a real hassle sometimes when life gets in the way, it always involves some additional unforeseen/unaccounted expenses that aren't easily passed on to the group (or sometimes it's just awkward to try to get everyone else to compensate for it, especially if it's due to some mistake or whatever).

    Oh, there's always that one guy who sends 5 million PMs and gets worried when you don't respond within 2-4 hours...

    I think it's something that we all do once, and then never again, heh.
    and you know i was fully expecting all of that and not one of those things happened. the worst thing that happened was five doa boards but the seller paid for the return shipping (i was sweating that one). Rise was the biggest pm'er with a whopping ONE pm!
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  11. #1011
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467


    Shinies.

  12. #1012
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    303
    Quote Originally Posted by Jacka View Post
    8347's for $27 each from palm54@charter.net.
    Damnit he won't sell any to me?

  13. #1013
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    How come? On 6th July he said he had 30x8346HE, 96x8346 and >200x8347. :s

  14. #1014
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    303
    Sorry, I so not.



    From: metalop1g [mailto:xxxxxxxxxxxxxxxxxxxxxx.com]
    Sent: Tuesday, August 03, 2010 10:18 PM
    To: palm54@charter.net
    Subject: 8347



    If you have two opteron 8347 shippable to canada, hit me back. I need them

  15. #1015
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Quote Originally Posted by metalop1g View Post
    Sorry, I so not.



    From: metalop1g [mailto:xxxxxxxxxxxxxxxxxxxxxx.com]
    Sent: Tuesday, August 03, 2010 10:18 PM
    To: palm54@charter.net
    Subject: 8347



    If you have two opteron 8347 shippable to canada, hit me back. I need them
    huh?
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  16. #1016
    Xtreme Member
    Join Date
    Nov 2009
    Posts
    303
    Quote Originally Posted by shoota View Post
    huh?
    Well "Sorry, I so not." was his answer to my email

  17. #1017
    Xtreme Member
    Join Date
    Jun 2008
    Location
    IL.
    Posts
    113
    It looks like he is sold out on Ebay, plus he may not ship ouside U.S.

  18. #1018
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    He shipped them to the UK no problem.

    Seems unlikely that he'd sell over 400 CPUs in less than a month.

  19. #1019
    Xtreme Member
    Join Date
    Jun 2008
    Location
    IL.
    Posts
    113
    Quote Originally Posted by Jacka View Post
    He shipped them to the UK no problem.

    Seems unlikely that he'd sell over 400 CPUs in less than a month.
    He had the lowest price, I can see others buying them up for resale with a nice profit.

  20. #1020
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Quote Originally Posted by metalop1g View Post
    Well "Sorry, I so not." was his answer to my email
    huh, that's a weird answer. let me email him
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  21. #1021
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    Didn't any of you notice S and D are next to each other on the keyboard? 8-)

  22. #1022
    Fanboy of Good Products
    Join Date
    Oct 2008
    Location
    FL
    Posts
    4,050
    Oh geez.. now I feel stupid. Thanks
    Cruncher #1: EVGA Z68 FTW | i7-2600k @ 4.5 | 6GB Ram
    Cruncher #2: Supermicro Dual-Socket | 2 x 6-core Opterons | 4GB Ram
    Cruncher #3: 8-core Xserve 1,1

    T400 for non-crunching



    "But don't think you'll run me over - It's, ah, planting season here in Texas... and the farm is growing..." -Otis11 on crunching WCG

  23. #1023
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    Quote Originally Posted by shoota View Post
    Oh geez.. now I feel stupid. Thanks
    Heh, same here
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

  24. #1024
    Xtremely High Voltage Sparky's Avatar
    Join Date
    Mar 2006
    Location
    Ohio, USA
    Posts
    16,040
    How hot does the chipset get? Is the passive cooler enough or should I strap a fan to it?

    I'm getting ready to order the remaining bits and pieces I need, and thought about ordering a fan for the chipset if it needs it.
    The Cardboard Master
    Crunch with us, the XS WCG team
    Intel Core i7 2600k @ 4.5GHz, 16GB DDR3-1600, Radeon 7950 @ 1000/1250, Win 10 Pro x64

  25. #1025
    Xtreme Member
    Join Date
    May 2009
    Location
    Hull, England
    Posts
    467
    I was wondering this too. Not sure how much airflow I'll need over the boards when under water.

Page 41 of 53 FirstFirst ... 313839404142434451 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •