-
CPU Level Up = Auto
Memory Level Up = Auto
AI Overclock Tuner = Manual
CPU Multiplier = 9x
FSB - Memory Clock Mode = Unlinked
FSB - Memory Ratio = auto
FSB (QDR) MHz = 1866
MEM (DDR) MHz = 1866
LDT Frequency = 5x
PCIE Bus Slot 1 & 2 MHz = 100
PCIE Bus Slot 3 MHz = 100
SPP<->MCP Ref Clock, MHz = 200
SLI-Ready Memory = Disabled
Memory Timing Setting
P1 = Auto
P2 = Auto
tCL =9
tRCD = 9
tRP = 9
tRAS = 30
Command Per Clock (CMD) = 2T
Rest auto
Over Voltage
CPU Voltage = 1.35 (actual)
Loadline Calibration = Enabled
CPU PLL Voltage = 1.58
CPU VTT voltage =1.34
Memory Voltage = 1.76 - Make sure you have a fan over your ram
NB Core Voltage = 1.64 - Use everest to monitor NB temp, under any circumstance go over 65 celcius
SB Core Voltage = 1.60
CPU GTL REF0 Ratio = Auto
CPU GTL REF1 Ratio = Auto
CPU GTL REF2 Ratio = Auto
CPU GTL REF3 Ratio = Auto
NB GTL REF Ratio = Auto
DDR3 CHA1 Ref Volt = DDR3_REF
DDR3 CHB1 Ref Volt = DDR3_REF
DDR3 CHA2 Ref Volt = DDR3_REF
DDR3 CHB2 Ref Volt = DDR3_REF
CPU Configuration
CPU Internal Thermal Control = Enabled
Limit CPUID MaxVal = Enabled
Enhanced C1 (C1E) = Disabled
Execute Disable Bit = Disabled
Virtualization Technology = Enabled
Enhanced Intel SpeedStep(tm) Disabled
CPU Core 2 = Enabled
CPU Core 3 = Enabled
CPU Core 4 = Enabled
Prime95 small fft's for at least 4hours, then blend for another 8 hours.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks