Quote Originally Posted by skuldarin View Post
it's not my VTT, regardless if i raise it up to 1.55v even, it still will not stabilize and it's because of the memory

G.Skill F3-12800CL7D-4GBECO sticks are designed to run in pairs, not in groups of 6. i'm already pushing the voltage on them when they're stock voltage is 1.35v and i'm setting it to 1.61v for my current stable clocks.

so what i'm going to do is wait for GEIL to source out their GET312GB2000C8HC and GET312GB2000C9HC 6 stick kits that are designed to be stable at 2000mhz @ 1.65v at CL8 and CL9 stock settings using all 6 sticks for a 12gb setup and i've already confirmed with them that this kit is 100% stable on the RE3 + 980x build.

until then...

my stable clocking is:
4.54ghz @ 1.48v 34x133 ratio
1600mhz @ 7-8-7-24-72 (stock rated speed and timings on memory)
vTT - 1.5v, vDIM - 1.61v
Seriously just get yourself some Corsair Ram. Ive got a kit of Dominator 2000Mhz C8 and I run it at 2000Mhz 8,8,8,24 CR2 1.65v 24/7 with RIII Extreme and 980X at 4.3Ghz 143x30 Vcore: 1.3750v, QPI: 1.23750. Ive pushed the memory further to around 2100mhz with a few more increments voltage without any trouble. Not sure how 12GB would go but it should be fine with a bit more voltage.