ASUS AMD Beta BIOS Releases

[thirdman]

Just found an issue with the M4A89GTD-Pro:

When LLC is enabled, proper voltage will be applied to CPUv, and additional voltage will be applied if needed
When LLC is off, a .05v droop is added to the CPUv. Furthermore, when the CPU is fully loaded, voltages will decrease down to Default (1.35v).

I wish I could verify using a Voltmeter, but I'm not sure where the voltage line is at on this board. Bingo if you can help me there, I could see if this is just a software bug or an actual BIOS bug.

this, and with LLC "auto" it adds volt under load, but not when booting into win7

need to set the vcore higher to boot if i put it on Auto, otherwise if i set it to "enable" it's all fine

[_Cyber_]

this, and with LLC "auto" it adds volt under load, but not when booting into win7

need to set the vcore higher to boot if i put it on Auto, otherwise if i set it to "enable" it's all fine

does that mean that if I set the vcore manually to a value in bios and not to auto then the +0.1V vcore under load is not existent?

[thirdman]

does that mean that if I set the vcore manually to a value in bios and not to auto then the +0.1V vcore under load is not existent?

don't think so, the LLC bug will be there still, just saying if u set it to Enable, will let u boot with lower vcore at start

[labview]

M3A32-MVP_DELUXE/2104

Thuban support

[Daveburt714]

Hey bingo13, is the new Beta for the C4F almost ready?

I know you guys are tweaking the voltages, and I'm kind of learning my way around 0905, but man... Turning LLC on for the IMC almost seems dangerous!

I've left it off for the last few revisions and set voltages manually, but I turned it on tonight trying to settle things down and my IMC hit 1.60v's!
It actually went higher than my core v's...I won't turn it on again...

I appreciate all the work you folks have been doing, but we need a new bios for the folks who bought your high dollar AMD board...

Thanks..... Dave

[bingo13]

Hey bingo13, is the new Beta for the C4F almost ready?

I know you guys are tweaking the voltages, and I'm kind of learning my way around 0905, but man... Turning LLC on for the IMC almost seems dangerous!

I've left it off for the last few revisions and set voltages manually, but I turned it on tonight trying to settle things down and my IMC hit 1.60v's!
It actually went higher than my core v's...I won't turn it on again...

I appreciate all the work you folks have been doing, but we need a new bios for the folks who bought your high dollar AMD board...

Thanks..... Dave

Sorry about the delay, been a bit under the weather this week. I will have an update from R&D on Sunday night. We actually went back and did a ground up new build based on the latest AGESA code that is performing better in all areas now. I will know a release date shortly.

The same holds true for the M3N series. On the M4A79, should have something very soon.

[Sentential]

Sorry about the delay, been a bit under the weather this week. I will have an update from R&D on Sunday night. We actually went back and did a ground up new build based on the latest AGESA code that is performing better in all areas now. I will know a release date shortly.

The same holds true for the M3N series. On the M4A79, should have something very soon.

Hot damn also lol @ MSI for still not having any AM2 board that support Thuban yet.

[Oliverda]

Hot damn also lol @ MSI for still not having any AM2 board that support Thuban yet.

Are you sure?

click

[Sentential]

Are you sure?

click

Correction #1 Thats worth a damn
Correction #2 That supports SLI

[diddi35]

On the M4A79, should have something very soon.

Very soon means? (Hope something like in the next minutes / hours ... just kidding )
Anyway thanks for the update

[imamage]

Sorry about the delay, been a bit under the weather this week. I will have an update from R&D on Sunday night. We actually went back and did a ground up new build based on the latest AGESA code that is performing better in all areas now. I will know a release date shortly.

The same holds true for the M3N series. On the M4A79, should have something very soon.

glad to hear that too
Thanks for getting M3A79-T DELUXE with Thuban support

[Naturecannon]

Sorry about the delay, been a bit under the weather this week. I will have an update from R&D on Sunday night. We actually went back and did a ground up new build based on the latest AGESA code that is performing better in all areas now. I will know a release date shortly.

The same holds true for the M3N series. On the M4A79, should have something very soon.

Looking forward to it, hopefully it comes through as promised this time around, got my hopes up.

Thanks for the updates.

[dyeager]

Sorry about the delay, been a bit under the weather this week. I will have an update from R&D on Sunday night. We actually went back and did a ground up new build based on the latest AGESA code that is performing better in all areas now. I will know a release date shortly.

The same holds true for the M3N series. On the M4A79, should have something very soon.

Bingo13, Many Thanks for your and your teams work on these bioses. Will be updating the M3A79-T Deluxe and M4A79T Deluxe system CPUs in the next round (just spent money updating Gigabyte CPUs otherwise it would be sooner). I will also update my threads that noted the the lack of asus x6 support. Will also upgrade my comments on asus bios upgrades when recommending system configurations. Once again, many thanks.