Quote Originally Posted by Dolk View Post
Just found an issue with the M4A89GTD-Pro:

When LLC is enabled, proper voltage will be applied to CPUv, and additional voltage will be applied if needed
When LLC is off, a .05v droop is added to the CPUv. Furthermore, when the CPU is fully loaded, voltages will decrease down to Default (1.35v).

I wish I could verify using a Voltmeter, but I'm not sure where the voltage line is at on this board. Bingo if you can help me there, I could see if this is just a software bug or an actual BIOS bug.

this, and with LLC "auto" it adds volt under load, but not when booting into win7

need to set the vcore higher to boot if i put it on Auto, otherwise if i set it to "enable" it's all fine