Hi, I hope someone can help out with my questions on this board and a 3003B288 980x.
First of all, I have my first stable linx 20 pass using 146x30 for 4.4 GHz. I have 1.375V set for the cpu but in CPU Z the value seems to vary alot under load. It goes between 1.376, 1.389 and up to 1.396V. Why is this?
I set loadline calibration = full in the bios. What does this do exactly?
There is also a jumper on the board which people say should be used. Which one is this?
Thanks