UnOfficial Asus Rampage II Extreme Thread

[GoNz0]

well i now have a 2nd 920, it seems more stable under 1.4 unlike the last but i still get random linX errors, it can run 50 max passes without error then fail 3 into a new run.

what suggestions do you have to get it stable?


OC from Memory level up - XMP
CPU Ratio setting - 20

CPU configuration
CPU Ratio Setting - 20
C1E Support - disable
Hardware prefetcher - enable
Adjacent Cache line prefetcher - enable
Intel Virtualization tech - disabled
CPU TM Function - disable
Execute Disabled bit - enable
Intel HT Technology - enable
Active Processor Cores - all

Intel Speedstep tech - disable
Intel Turbo Mode tech -
BCLK frequency - 200
PCIE frequency - 100
DRAM frequency - DDR3 1604
UCLK frequency - auto
QPI frequency - auto

EPU II phase control - full phase
Load-line calibration - enable
CPU differential amplitude - auto
Extreme OV - enable


Cpu voltage - 1.375
CPU PLL voltage - 1.842
QPI-Dram voltage - 1.375

IOH voltage - auto
IOH PCIE voltage - auto
ICH voltage- auto
ICH PCIE voltage - auto

Current voltage X.xxx v, X.xxx v, X.xxx v ,X.xxx v
DRAM Bus voltage - 1.64
DRAM REF voltage - auto



CPU spread spectrum - disabled
PCIE spectrum - disabled
CPU clock skew - auto or
IOH clock skew - auto


i have swapped over to 1903 bios from 1802 as well.