MMM
Results 1 to 25 of 52

Thread: Are You Having RIIIE Post Issues? (Possible Reason Inside)

Threaded View

  1. #11
    I am Xtreme
    Join Date
    Sep 2006
    Posts
    10,374
    Time to make some sort of logging lads :

    Bios used :
    RAM used (type : Speeds : timings : )
    CPU : @ ( Bclock x ) & cooling used
    GPU :
    PSU :

    Problem desciption : ( if possible also how to replicate the issue )

    If possible screenshots of the bios settings or to fill in the Donmarkoni template :

    Target CPU Frequency 2666MHz
    Target DRAM Frequency 1603MHz

    LN2 Mode: Disabled***
    QPI Loadline Calibration: Enabled***

    Sync Mode [Enabled]
    AI Overclock Tuner [Manual]
    OC From CPU level Up [Auto]
    CPU Ratio Setting [20.0]
    CPU Turbo Power Limit [Disabled]

    >CPU Configuration----------------------------
    CPU Ratio Setting [20.0]
    C1E Support [Enabled]
    Hardware Prefetcher [Enabled]
    Adjacent Cache Line Prefetcher [Enabled]
    Intel(R) Virtualiyation Tech [Enabled]
    CPU TM Function [Disabled]
    Execute Disable Bit [Enabled]
    Intel(R) HT Technology [Enabled]
    Active Processor Cores [All]
    A20M [Disabled]
    Intel(R) SpeedStep(TM) Tech [Enabled]
    Intel(R) C-STATE Tech [Enabled]
    C State package limit setting [Auto]
    ----------------------------------------------

    BCLK Frequency [133]
    PCIE Frequency [100]
    DRAM Frequency [1603]
    UCLK Frequency [3209]
    QPI Link Data Rate [AUTO]

    Memory Configuration Protect [Disabled]

    >DRAM Timing Control--------------------------
    CAS# Latency 9 [9]
    RAS# to CAS# Delay 9 [9]
    RAS# PRE Time 9 [9]
    RAS# ACT Time 24 [24]
    RAS# to RAS# Delay 6 [AUTO]
    REF Cycle Time 110 [110]
    WRITE Recovery Time 15 [15]
    READ to PRE Time 9 [9]
    FOUR ACT WIN Time 31 [31]
    Back-To-BackCAS# Delay 0 [Auto]

    Timing Mode 1N [1N]
    Round Trip Latency on CHA [AUTO]
    Round Trip Latency on CHB [AUTO]
    Round Trip Latency on CHC [AUTO]

    WRITE To READ Delay(DD) 8 [Auto]
    WRITE To READ Delay(DR) 8 [Auto]
    WRITE To READ Delay(SR) 18 [Auto]
    READ To WRITE Delay(DD) 7 [Auto]
    READ To WRITE Delay(DR) 7 [Auto]
    READ To WRITE Delay(SR) 7 [Auto]
    READ To READ Delay(DD) 7 [Auto]
    READ To READ Delay(DR) 6 [Auto]
    READ To READ Delay(SR) 4 [Auto]
    WRITE To WRITE Delay(DD) 8 [Auto]
    WRITE To WRITE Delay(DR) 8 [Auto]
    WRITE To WRITE Delay(SR) 18 [Auto]
    ----------------------------------------------

    CPU Differential Amplitude [Auto]
    CPU Clock Skew [Auto]
    IOH Clock Skew [Auto]
    ------------ Extreme Engine Digi+ ------------
    Digi+ PWR Mode [T-Balanced]
    PWR Volt. Control [Auto]
    Load-Line Calibration [Full]
    CPU Voltege OCP [Enabled]
    CPU PWM Frequency [1000kHz]

    Extreme OV [Disabled]
    Extreme OC [Auto]

    CPU Voltage 1.250 [1.25000]
    CPU PLL Voltage 1.812 [Auto]
    QPI/DRAM Core Voltage 1.350 [1.35000]
    DRAM Bus Voltage 1.654 [Auto]

    >DRAM REF Voltages----------------------------
    DRAM DATA REF Voltage on CHA [Auto]
    DRAM CTRL REF Voltage on CHA [Auto]
    DRAM DATA REF Voltage on CHB [Auto]
    DRAM CTRL REF Voltage on CHB [Auto]
    DRAM DATA REF Voltage on CHC [Auto]
    DRAM CTRL REF Voltage on CHC [Auto]
    ----------------------------------------------

    IOH Voltage 1.244 [Auto]
    IOH PCIE Voltage 1.508 [Auto]

    ICH Voltage 1.111 [Auto]
    ICH PCIE Voltage [Auto]

    ---------- Spread Spectrum Control -----------
    CPU Spread Spectrum [Disabled]
    DRAM Spread Spectrum [Disabled]

    ***on-board jumper dependant
    Last edited by Leeghoofd; 06-28-2010 at 11:38 PM.
    Question : Why do some overclockers switch into d*ckmode when money is involved

    Remark : They call me Pro Asus Saaya yupp, I agree

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •