EK-D5 Dual TOP

[Waterlogged]

1st this is one of the best topic's and well explained one I have seen. Am new to this water cooling. Am building my 1st water cooling system. I have all ready got 2 D5 because I wanted to setup 2 loops for my pc. But now I like this better one loop and a hole lot of GPM's, may be. I have 2 Swiftech MCP655 and on the spec's it has, Operating voltage range 8 to 24 VDC. Now has any one ran this pump's at 24vdc? And would this give me a better result?

Pointless after 13.1V.

http://www.xtremesystems.org/forums/...d.php?t=170217

[KaRLiToS]

With that 2x MCP655 Dual Top...Can I run
-360 Radiator (feser)
-240 Radiator (feser)
-140Radiator (Black Ice GTSthealth)
-CPU Block
-MOBO block
-WaterBlock for hd 5850
-Another Block for HD 5850

[KaRLiToS]

Bump for last post??? Cant find answers anywhere else

[=[PULSAR]=]

With that 2x MCP655 Dual Top...Can I run
-360 Radiator (feser)
-240 Radiator (feser)
-140Radiator (Black Ice GTSthealth)
-CPU Block
-MOBO block
-WaterBlock for hd 5850
-Another Block for HD 5850

I have ran the dual d5 top on my setup without any issues

2x 480 rads
CPU block
Mobo block

[KaRLiToS]

So you think I can run all those block and rads .

3 Radiators
-Feser 360
-Feser 240
-Black Ice 140

4 waterBlocks
-CPU HK 3.0
-Asus R3E full block
-2xEK 5850 Blocks?

This is my actual setup, I want to add Full Motherboard Block, a 140mm Rad and maybe another EK HD 5850 waterBlock (Graphic Card)

[Major]

So you think I can run all those block and rads .

3 Radiators
-Feser 360
-Feser 240
-Black Ice 140

4 waterBlocks
-CPU HK 3.0
-Asus R3E full block
-2xEK 5850 Blocks?

This is my actual setup, I want to add Full Motherboard Block, a 140mm Rad and maybe another EK HD 5850 waterBlock (Graphic Card)

What are you using now for a pump? a D5 and top?

[KaRLiToS]

Im using 2xMCP655 Swiftech Pumps on the EK dual Top.

[=[PULSAR]=]

Im using 2xMCP655 Swiftech Pumps on the EK dual Top.

I don't think you would run into any issues as long as you don't have loads of 90 degree bends.

[KaRLiToS]

I only have one 90' adapter on my 240 rad inlet. The others are rotary 45' and 90' degress, I'll have 4 snakes

1 like this



and a couple like this (7-8)

[KaRLiToS]

I think I'll add the other 140 radiator along with the full mobo waterblock.

[soda480]

Any issues with mounting this thing vertically?

[luke997]

Any issues with mounting this thing vertically?

Nope (so far

[Johnny87au]

I have ran the dual d5 top on my setup without any issues

2x 480 rads
CPU block
Mobo block

Could i run that with say 2x 355 pumps both with XSPC Tops?

[Alexandr0s]

Johnny, 355's have higher head pressure than D5's. Depending on the rads, you might even be able to pull that of with a single 355.

[soda480]

i was about to pull the trigger on buying an EK dual d5 top until i found this: http://www.frozencpu.com/products/11...tl=g30c107s156

[Greenfox]

i was about to pull the trigger on buying an EK dual d5 top until i found this: http://www.frozencpu.com/products/11...tl=g30c107s156

Looks sweet

[Blacky]

i was about to pull the trigger on buying an EK dual d5 top until i found this: http://www.frozencpu.com/products/11...tl=g30c107s156

Looks awesome, though could this could be used as well ?