funny this thread just got bumped. My p5k premium just died today after about 3 years of use :/ I am going to go with Gigabyte for my i7 build.
funny this thread just got bumped. My p5k premium just died today after about 3 years of use :/ I am going to go with Gigabyte for my i7 build.
Greetings!
My P5K Premium also went broke a month ago.
Corsair Dominator 4 x 2GB works like a charm. WIN 7 64 bit.
ASUS P5K Premium 2.00G/A02 - Bios 1101
Q9650 @ 4.0@1.30 - 24/7
Corsair 4 x 2048 8500 C5
ASUS HD 6950 2 GB.
Cooling: PA 120.3 w/ shroud. (CPU / GPU / NB)
Mist 800W
Lian Li PC-A7010
Hi guys,
Does anybody use SSD drive on this motherboard? I would like to buy Intel's G2 or G3 SSD and I'm wondering if everything will be ok. Now I have SATA2 hdd and I had to change interface to SATA1 because of known P5K Premium SATA2 issue... But there is no option to change interface in SSD drives :/
-> ASUS P5K Premium
-> C2D E8400 E0 @ 4,0 GHz (1,152v)
-> 4x1Gb Crucial Lanfest
-> EVGA 8800GT
-> WD6400AAKS 640GB
-> DVD-RW Samsung SH-S203B
-> Be Quiet! Dark Power P7-Pro 550W
-> Chieftec LBX-03B-B-B
Asus Rampage II Gene, Xeon W3550 D0 Mushkin PC3-2000 6GB, BFG 9600GT OC 512MB DDR3
Asus A8N32-SLI Deluxe 1.01G, AMD A64 4000+, 2x1GB Ultra PC-3200, EVGA 7600GT 256MB DDR3
Asus MA378-T with AMD Athlon 64 X2 7850
ECS 945GCT-M/1333 v3.0, Intel Celeron E1400, MSI 8500GT 256MB DDR3
BIOStar P4M900-M7 Rev. 7.0, Intel Celeron 440, 1GB Kingston, 6600LE
Gigabyte M61PME-S2P with AMD Athlon 64 LE-1660, EVGA 8500GT 1GB DDR2
Well, I gave it a try last week with a X25 Gen. 2, 80GB drive. WIN7 installation took me over an hour, and the drive was slow - 130MB/s read and 70MB/s write.
Tried a lot of different SATA drivers, with no lucky.
If you manage to get it to work - please let us know!
Regards.
![]()
ASUS P5K Premium 2.00G/A02 - Bios 1101
Q9650 @ 4.0@1.30 - 24/7
Corsair 4 x 2048 8500 C5
ASUS HD 6950 2 GB.
Cooling: PA 120.3 w/ shroud. (CPU / GPU / NB)
Mist 800W
Lian Li PC-A7010
What Sata connector have you got it on - the jmicron is slower. Have you set it to AHCI mode?
Last edited by sesdave; 11-27-2010 at 04:10 PM.
Q6600 - L729A959
VID1.2625 @3.72GHz (465x8) 1.4625v(BIOS)
P5K Premium (0702 BIOS)
Win7 Ultimate x64
Ultima-90
4x1GB Ballistix 8500C5 @ 1166 5-5-5-12 2.2v
MSI 5770 Hawk 1030/1330 - 1.25v
2 x Hitachi T7K500 320MB - Matrix RAID 0/1
Hiper Type R 680w
I'm using one of the regular SATA ports (don't recall which). Have the Jmicron controller disabled in bios.
Win7 64 was installed and running in AHCI mode.
I googled "slow SSD and P5K" - seems like more ppl than me having problems with this combo.
Also tried the 1101 "option ROM" bios (modded bios) with the same result.
(1101 works fine for my OC, but not any major improvement over 0702).
Regards.
ASUS P5K Premium 2.00G/A02 - Bios 1101
Q9650 @ 4.0@1.30 - 24/7
Corsair 4 x 2048 8500 C5
ASUS HD 6950 2 GB.
Cooling: PA 120.3 w/ shroud. (CPU / GPU / NB)
Mist 800W
Lian Li PC-A7010
Anyone else still got this MB - I am still running it with the q6600 - I keep thinking of upgrading o a sandybridge i5 2500k and all the associated kit but still find that this old setup still runs all the games I can get perfectly okay with the occassional GPU upgrade - another one immenent to a 560 or 6970. I think I will just keep it till it dies - anyway it keeps my room warm in the winter with the heat it chucks out-lol!
Q6600 - L729A959
VID1.2625 @3.72GHz (465x8) 1.4625v(BIOS)
P5K Premium (0702 BIOS)
Win7 Ultimate x64
Ultima-90
4x1GB Ballistix 8500C5 @ 1166 5-5-5-12 2.2v
MSI 5770 Hawk 1030/1330 - 1.25v
2 x Hitachi T7K500 320MB - Matrix RAID 0/1
Hiper Type R 680w
At the moment your videocard is the most limiting factor here, game performance won't be that much better FPS wise with the same hardware on SB...(ofcourse windows and co is more responsive) I would hold off till the new technolgies are on the market...
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
Yes my thinking too - i dont really need W7 and my apps to be any more responsive than they are - am not into video rendering and even then the q6600 still does adaquate when I need it. I do like the fun of overclocking new rigs but cant see the point of a total hardware change and all the associate expense just yet as there isnt any real reason to do it. So will buy a better GPU to get some better FPS and detail on the games and stick with this relatively slow old setup till it cooks itself -lol!
Last edited by sesdave; 07-10-2011 at 12:51 PM.
Q6600 - L729A959
VID1.2625 @3.72GHz (465x8) 1.4625v(BIOS)
P5K Premium (0702 BIOS)
Win7 Ultimate x64
Ultima-90
4x1GB Ballistix 8500C5 @ 1166 5-5-5-12 2.2v
MSI 5770 Hawk 1030/1330 - 1.25v
2 x Hitachi T7K500 320MB - Matrix RAID 0/1
Hiper Type R 680w
I've bought new Kingston SSDNow HyperX 3K-SH103S3/120G and I've got this results on Sata II. New firmware is 5.0.3. Bios is 1101.
Intel E6500@3,3GHz, Asus P5K Premium Black Pearl 18th Anniversary Edition, Geil 2x1GB & OCZ Titanium 2x1GB XTC 4-4-4-12 800MHz, Asus ENGTX560 DCII OC/2DI/1GD5, Kingston SSDNow HyperX 3K-SH103S3/120G+WD Scorpio Black 750GB, Corsair HX520W, Samsung 961BF, noname open case, MGE UPS PC500, Win7+SP1 Ultimate x64 lite, Sony P200
Bookmarks