Results 1 to 25 of 7441

Thread: ** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

Hybrid View

  1. #1
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by Hoss331 View Post
    I think lower-mid 1.7s is generally considered safe for 24/7 but not 100% sure. For 24/7 use I never really needed to raise vdimm above stock, but I only primed this setup to 506*9 1620 6-6-4-16-52, I always ran mine at 1.66 bios which is like 1.63v.
    yes i checked when you posted here

    http://www.xtremesystems.org/forums/...05132&page=213

    you are runing PL8, im on PL7 and you needed 1,7 set on bios wich idles at 1,66

    Thanks for the tips hypers are like old good D9 as zsams said
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  2. #2
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,247
    Quote Originally Posted by andressergio View Post
    yes i checked when you posted here

    http://www.xtremesystems.org/forums/...05132&page=213

    you are runing PL8, im on PL7 and you needed 1,7 set on bios wich idles at 1,66

    Thanks for the tips hypers are like old good D9 as zsams said
    ya but expensive to collect
    i have 4 triple chanel sets
    sold of my 12gb of dominator gt

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  3. #3
    Xtreme Enthusiast
    Join Date
    Oct 2008
    Location
    Florida
    Posts
    562
    Quote Originally Posted by andressergio View Post
    yes i checked when you posted here

    http://www.xtremesystems.org/forums/...05132&page=213

    you are runing PL8, im on PL7 and you needed 1,7 set on bios wich idles at 1,66

    Thanks for the tips hypers are like old good D9 as zsams said

    That was the baseline run for this setup to get a workable template, all runs after used 1.66 bios. With F8c PL8 is the lowest it will let me drop but PL wont affect vdimm.

    http://www.xtremesystems.org/forums/...postcount=5542
    Q9650

    2600k

  4. #4
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486

    Usb3p

    Still on stock vdimm pushing and testing what are the best timmings, so far loving this ones

    X3380@ 4500
    ST 2200 CL8@ 1600 6-6-5-18 trfc 52 Performace Level 7 - Vdimm 1,65









    cheers
    Sergio
    Last edited by andressergio; 06-23-2010 at 07:05 PM.
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  5. #5
    Registered User
    Join Date
    Jan 2009
    Posts
    19
    Hi guys i have a couple of question´s
    Iam looking for a chipset cooler for ep45-ud3p , iam using a thermalright ultra extreme and the 1st pci-e 1x is being used by my xonar stx , so in your opinion is there any cooler that can fit in?
    Other thing is , if i place the sound card in the pcie 16x orange the first one will work @ 8x like it did when you used 2 gpus?
    Thz in advance.

  6. #6
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by invict View Post
    Hi guys i have a couple of question´s
    Iam looking for a chipset cooler for ep45-ud3p , iam using a thermalright ultra extreme and the 1st pci-e 1x is being used by my xonar stx , so in your opinion is there any cooler that can fit in?
    Other thing is , if i place the sound card in the pcie 16x orange the first one will work @ 8x like it did when you used 2 gpus?
    Thz in advance.
    why u need ? im using a fan near it and pushing 1,52MCH

    when using 2 PCIE both will work at x8

    Cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

  7. #7
    Registered User
    Join Date
    Jan 2009
    Posts
    19
    1.52 for 500 fsb it´s that safe for 24/7?
    Iam struggling to get the chipset stable , iam using @ 500 fsb @ 1.38 and using 900,900,0,50? any suggestion on that aspect?

  8. #8
    Administrator andressergio's Avatar
    Join Date
    Jul 2007
    Location
    Montevideo - Uruguay
    Posts
    5,486
    Quote Originally Posted by invict View Post
    1.52 for 500 fsb it´s that safe for 24/7?
    Iam struggling to get the chipset stable , iam using @ 500 fsb @ 1.38 and using 900,900,0,50? any suggestion on that aspect?
    for pushing tight timmings i need it, linx stable needs it so games like BC2 i just keep MCH as cooler as i can

    Cheers
    Sergio
    Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
    ASRock X299 OC Formula
    ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
    1x Intel Optane SSD 905P 480GB
    4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
    EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
    SilverStone ST1500W-TI TITANIUM
    Alphacool Custom Water Cooling

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •