DimasTech Bench Tables V2.5

[Lunait]

They already have cutoffs on the side. One side supports 3x120 rad, another side is an opening.

Well, the Easy benchtables do, but this is a sketch for the "mini" benchtable discussed recently in this thread.

[TBahre]

My new motherboard will be here tomorrow and it needs a home! Where are you with the next lot of tables dimas??

[Dimas]

My new motherboard will be here tomorrow and it needs a home! Where are you with the next lot of tables dimas??

the materials arrived last week on manufacturing...it is just matter of one week or around, as told in the previus post...and begin of may, production time can be very variable on quantity needed, will updating thread once we're ready...thanks for your patience.

[TBahre]

Thanks for the reply. I don't mean to be pushy, it's just so hard to wait for something so awesome.

[DosDuoNo]

i couldnt wait, i managed to pick up a second hand flawless DimasTech bench v2.0 for £90 i am just waiting on some extra barbs and tubing before re locateing my rig onto it.

and even though its the v2.0 its still fantastic

[=[PULSAR]=]

Hey Dimas do you play on supporting the SR-2, and also dual 480 rads? Thanks BTW LOVE your craftmenship

[lkiller123]

some new color customization, it is a Carbon Look bench table Easy V2.5
it's a prototype and maybe it need another run of glossy trasparent paint.




together with the carbon look, there are the XL-ATX adding cards support

Here you go

[eva2000]

I have a Solidworks 2009 3D model of the case, if that's of any help.
If you make a prototype, I can try it out

I'd be in on a mini version bench table as well, space saving is a must!

[=[PULSAR]=]

Here you go

I don't think it would be wide enough to support it

[Dimas]

Hey Dimas do you play on supporting the SR-2, and also dual 480 rads? Thanks BTW LOVE your craftmenship

Hello actually, there's no booked Table for SR-2, it will goes on request we think, couse numbers are very low...so who is interested in getting some done, have to tell us, through PM here or via email/website.

thanks for your compliments, a table like this will come very very huge, and don't know how many people have space enough to house a huge thing like this...

we got a Hard Table incoming for the SR-2, about the Easy one, as told..need numbers...

The Mini is almost ready, need to fix some little problem with bends, than i'll post renders,hopefully by end of this week.

Dual Side 3 fans radiator coming to painter this week

[=[PULSAR]=]

Hello actually, there's no booked Table for SR-2, it will goes on request we think, couse numbers are very low...so who is interested in getting some done, have to tell us, through PM here or via email/website.

thanks for your compliments, a table like this will come very very huge, and don't know how many people have space enough to house a huge thing like this...

we got a Hard Table incoming for the SR-2, about the Easy one, as told..need numbers...

+1 for a SR-2 Easy, if you could do some renders for it I could post it over at the evga forums and generate interest. There are quite a few people over there would would like a case for the SR-2 but don't want to pay 400+ USD for a case. Also instead of the triple rad on the side you think it would be possible to do a quad on both sides?

[lkiller123]

Hello actually, there's no booked Table for SR-2, it will goes on request we think, couse numbers are very low...so who is interested in getting some done, have to tell us, through PM here or via email/website.

thanks for your compliments, a table like this will come very very huge, and don't know how many people have space enough to house a huge thing like this...

we got a Hard Table incoming for the SR-2, about the Easy one, as told..need numbers...

The Mini is almost ready, need to fix some little problem with bends, than i'll post renders,hopefully by end of this week.

Dual Side 3 fans radiator coming to painter this week

Will there be retailers in the US? I've been to your website and I saw the shipping is a pain in the butt.

[Dimas]

Will there be retailers in the US? I've been to your website and I saw the shipping is a pain in the butt.

still working on, right now ship cost are not that high for Usa and Canada, we have a special rates for that 2 countrys, there is the USD/Euro change that affect a lot too, but i think with our first reseller entering there will be better prices, it's just a matter of waiting...

[Dimas]

Easy dual sided on delivery today...and also some good news about another project...that have something to do with Aluminium...ehehe...

[Jshay]

I just got my Dimastech 2.5 bench in the mail this week and I absolutely love this thing! I was going to go with metallic black but the white bench looks amazing Can't wait to do some more work on this bench.

[Dimas]

I just got my Dimastech 2.5 bench in the mail this week and I absolutely love this thing! I was going to go with metallic black but the white bench looks amazing Can't wait to do some more work on this bench.

thanks for your feedback, looking forward to see some good benching

[Dimas]

received and on painting, an SR-2 special edition bench Table, this table is just for demostration, it will be present at Computex





on the Study also a Bench Table with Hd/optical and psu for that beautiful motherboard, if there are enough people interested...


The MINI is coming very nice...still some last things to adjust, and will post some good pics..

[Lunait]

[...] The MINI is coming very nice...still some last things to adjust, and will post some good pics..

Good to hear

[guilleguillaume]

Waiting for that photos and then I will decide which Benchtable cover my needs^^

[darckcrystal]

where can i buy it??!!!

[Dimas]

sorry guys for delay, very full period...some good news for the Bench Table Easy, that is receiving a new Piece, an SSD holder for 6 disks, it is possible to integrate it inside a HD support.
and also on the way, full series of radiator spacers, metal material and powder coating, of course customizable in color


PS forget to say, US/CANADA distribution is nearly to be done, so if everyone have some info to ask, customization, colors or some special custom work to have realized, now is possible also for US/CANADA countrys...timing around begin of Q3.

[docwhom]

PS forget to say, US/CANADA distribution is nearly to be done, so if everyone have some info to ask, customization, colors or some special custom work to have realized, now is possible also for US/CANADA countrys...timing around begin of Q3.

Dimas, when I first saw your benches/tables, I was amazed at the solid construction.

Maybe you will never send any tables to my Country, but can you let me know when and if ever, you will send a table or two to me here in Western Australia???

Unfortunately I live in the far end of the so-called civilized world. And getting any decent cases/benches is near impossible.

But would you at least consider receiving full-payment for one bench, to be sent here?

[Dimas]

Dimas, when I first saw your benches/tables, I was amazed at the solid construction.

Maybe you will never send any tables to my Country, but can you let me know when and if ever, you will send a table or two to me here in Western Australia???

Unfortunately I live in the far end of the so-called civilized world. And getting any decent cases/benches is near impossible.

But would you at least consider receiving full-payment for one bench, to be sent here?

thanks for words...you have a pm...

[Nvidia Ireland]

Be carefull!! I recently got my new bench to find it had a big scratch on the top. Emailed DimasTech 3 days ago and still no reply. Not impressed

[=[PULSAR]=]

Be carefully!! I recently got my new bench to find it had a big scratch on the top. Emailed DimasTech 3 days ago and still no reply. Not impressed

Hes been a really busy guy working on a couple new projects. Andrea is a good guy I'm sure he will get back to you.