** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[andressergio]

5254 that is a nice score...

I don't see you on hwbot? i do see Jor3llBR/Elano

@ 5255 mhz in the top spot,

mine is #2 for the silver....

that is my next goal....
going for over 5255 mhz

I almost had it but cpuz froze at 561fsb/ and it was dinner time....
i think i just need to adjust a bit,,, got it up to 549 and need to get
over 553

more to come. then i will go for the lower clock 2D stuff and start playing
with the ram,...

yeah that is my chip

i just used my old loop for 5ghz and shoot a SPI and runs awesome, now i need to try higher on this USB3P but its runing soooo nice at 4500 with mem 1600 CL6 PL7 that i dont wanna touch anything lol

here's my run



Congrats again on your results, post a pic of your bench rig

[systemviper]

sweetness, i wish i had this UD3P and it took ddr3, i think it would rock lots more,
but i got a REX to try to... and
i am looking at your board too, the USB3P, it's not to expensive.......
just got to get the wife off my spending lockdown,...

[systemviper]

on another note, there is a possibility that x3380 ES was mine at one time.... very possbily

PS, very nice run, love the settings

[andressergio]

sweetness, i wish i had this UD3P and it took ddr3, i think it would rock lots more,
but i got a REX to try to... and
i am looking at your board too, the USB3P, it's not to expensive.......
just got to get the wife off my spending lockdown,...

that's so nice a neat

[andressergio]

on another note, there is a possibility that x3380 ES was mine at one time.... very possbily

PS, very nice run, love the settings

thx mate i dont have XP anymore as i converted my raid to dynamic, waiting some $$$ to get another ssd

Cheers
Sergio

[systemviper]

that's so nice a neat

lol, neat, yea i had to clean it up, i have a REX that i test next to the gig,
i run the REX on air to learn the bios....

but that i am getting close to the score i want, i had to

-0----- clear the area 0 ------

[systemviper]

5263.04 mhz systemviper Intel Xeon X3380 @5263MHz SS


There is a new TOP score for the X3380 @ hwbot......


Wahoooooooo 5263.04 mhz


http://valid.canardpc.com/show_oc.php?id=1237051

[andressergio]

5263.04 mhz systemviper Intel Xeon X3380 @5263MHz SS


There is a new TOP score for the X3380 @ hwbot......


Wahoooooooo 5263.04 mhz


http://valid.canardpc.com/show_oc.php?id=1237051

congratssss see what a lit push can do

great great

[systemviper]

congratssss see what a lit push can do

great great

Exactly, next i go after your 9sec 234ms superPi run

naaa, but hopefully, i can get some more 2d scored with this chip,

I just scored some sweet DDR2 team, 1300 and
Dominator cas3 and team cas 3

to go along with my doninator 1250's

now if i only knew how to tweak ram

[Hoss331]

sweetness, i wish i had this UD3P and it took ddr3, i think it would rock lots more,
but i got a REX to try to... and
i am looking at your board too, the USB3P, it's not to expensive.......
just got to get the wife off my spending lockdown,...

Naw, you want to stay with the ddr2 board for most of the 2d benchs, clock for clock there faster. SPI 32m and maybe pifast are really the only ones that benefit from ddr3.

[the_real_7]

I have a rev1.1, it hated 240b. I had to use 250a with the gskill pi's to reach 1200. Finally I gave up and went back to the rev1.0.

Mine hates 250A for some weird reason reason ,must be settings im going to try again tomorrow with 250A 200D AND 240B ... if i get somewhere good if not Im it was worth the try and fun ... but for me im not putting no more money into 775 ..and waiting for Intel sandty bridge

[radaja]

5263.04 mhz systemviper Intel Xeon X3380 @5263MHz SS


There is a new TOP score for the X3380 @ hwbot......


Wahoooooooo 5263.04 mhz


http://valid.canardpc.com/show_oc.php?id=1237051

Congrats viper
and very nice bench pics

[andressergio]

Naw, you want to stay with the ddr2 board for most of the 2d benchs, clock for clock there faster. SPI 32m and maybe pifast are really the only ones that benefit from ddr3.

that aint true Cliff

USB3P is as good as the UD3P and no reboot loops and awesome bandwith speciallly if you take the time to get the me she likes

i can score at 4500 almost same 3D benches as on my UD3P at 4608

[systemviper]

Naw, you want to stay with the ddr2 board for most of the 2d benchs, clock for clock there faster. SPI 32m and maybe pifast are really the only ones that benefit from ddr3.

thanks for the tip!

that aint true Cliff

USB3P is as good as the UD3P and no reboot loops and awesome bandwith speciallly if you take the time to get the me she likes

i can score at 4500 same 3D benches as on my UD3P at 4608

woooooo, what to do now,... I alsp got a nice rex that has done over 620 fsb before from the guy i got it from, he got some records with it.
but i just love my gig UD3p, but must learn that asus bios...

[andressergio]

woooooo, what to do now,... I also got a nice rex that has done over 620 fsb before from the guy i got it from, he got some records with it.
but i just love my gig UD3p, but must learn that asus bios...

UD3P rev 1.0 was great mobo but this one is an improved version just need a mature bios, im talking with giga support givin' them some data, i love it and great as you can be 2000+ 1T DDR3 stable and bench on more, i agree that on DDR2 EP45 UD3P 1.0 rocks so this one on DDR3

asus aint for 775 QUADS just duals, GIGA = QUAD heaven

Cheers
Sergio

[systemviper]

UD3P rev 1.0 was great mobo but this one is an improved version just need a mature bios, im talking with giga support givin' them some data, i love it and great when you can bench at 2000+ 1T DDR3, maybe its not a board to replace the UD3P but nice to give a try

Cheers
Sergio

Yea, i will never replace the golden UD3P, i got it as soon as they came out,
i saw that extra copper marketing and bit the hook, man o man i am glad i did...

[radaja]

thanks for the tip!



woooooo, what to do now,... I alsp got a nice rex that has done over 620 fsb before from the guy i got it from, he got some records with it.
but i just love my gig UD3p, but must learn that asus bios...

throw in a duallie and let her rip.just push push push the fsb
i wish i had my rex still.

[systemviper]

throw in a duallie and let her rip.just push push push the fsb
i wish i had my rex still.

Yea, right now i got 2 REX's and the UD3P...

Plus almost 20 - 775 chips.....

so lots of 2D benching to come.

then i switch over to 3D and my R3E, W3570 & CMGTX2

so lots of stuff to overvolt!

[Hoss331]

that aint true Cliff

USB3P is as good as the UD3P and no reboot loops and awesome bandwith speciallly if you take the time to get the me she likes

i can score at 4500 almost same 3D benches as on my UD3P at 4608

I said 2D benchs, not 3D benchs. As you know I have both boards and the only 2D bench that really benefits from the ddr3 is SPI 32m.

[radaja]

Yea, right now i got 2 REX's and the UD3P...

Plus almost 20 - 775 chips.....

so lots of 2D benching to come.

then i switch over to 3D and my R3E, W3570 & CMGTX2

so lots of stuff to overvolt!

wow,thats alot of options with the 775 side of things
i wish i had 20 chips to play with

[andressergio]

wow,thats alot of options with the 775 side of things
i wish i had 20 chips to play with

i want 20 chipppppsss

radaja you really miss 775 badly do you ?

[systemviper]

wow,thats alot of options with the 775 side of things
i wish i had 20 chips to play with

i want 20 chipppppsss

radaja you really miss 775 badly do you ?

I'll take a picture tomorrow of the SV 775 Project

i have been saving chips for a while now....
Plus ram and now a few boards...

[radaja]

i want 20 chipppppsss

radaja you really miss 775 badly do you ?

yea i do,but soon i wont

I'll take a picture tomorrow of the SV 775 Project

i have been saving chips for a while now....
Plus ram and now a few boards...

cant wait to see the pictures of the systemviper 775 project
i bet you have quite a bit of ram.

[andressergio]

yea i do,but soon i wont

cant wait to see the pictures of the systemviper 775 project
i bet you have quite a bit of ram.

yesss i see you will play with 12 threads right

i also want to see those pics System

[jjjc_93]

Been a way from my 775 rig a little too long. The PSU went and I sold my RAM aswell for needed cash at the time.

Got 2300mhz cas 8 ram on the way and a corsair 850HX, will all be here early next week, that and 4c mornings here, I can't wait to get back to pushing the X3360.

Also some nice results going on here. Giving me alot to read through :p