** Official ** Gigabyte UD3 P45 Series -- EP45-UD3 / EP45-UD3R / EP45-UD3P

[NoGuru]

Might just be a bad sensor, I think almost all quads do the same thing. Mine read just like yours In-Flu.

[In-Fluence]

The board's sensor seems to be matching up to the internal 4 core temps pretty well (a lot better than the extreme and ud3p anyway). Would the board read the CPU's internal sensors incorrectly?

Anyway left it idling for a few hours whilst ambient's cooled, but still at 42,38,42,42°C and prime instantly goes into 60's / 70's. Starting to wonder if lapping really did me any favours - maybe the block has kind of 'moulded' around the CPU and isn't matching up the the CPU surface any more?!

[andressergio]

The board's sensor seems to be matching up to the internal 4 core temps pretty well (a lot better than the extreme and ud3p anyway). Would the board read the CPU's internal sensors incorrectly?

Anyway left it idling for a few hours whilst ambient's cooled, but still at 42,38,42,42°C and prime instantly goes into 60's / 70's. Starting to wonder if lapping really did me any favours - maybe the block has kind of 'moulded' around the CPU and isn't matching up the the CPU surface any more?!

never got more than 1C of lapping a CPU mate...i stopped doing it, lapping should be done when CPU surface is irregular or block...but if both are acceptable dont worth it...

btw my second core reads lower too

[andressergio]

edit: ok I am pretty sure it is stable now....

congrats mate glad u r happy now keep pushing

[Dark-Energy]

Yeah, the block for my cooler is convex slightly, I used a razor blade to see. The CPU is flat though.

Might work good for a dual core cause the core is in the center but on a quad there are 2 cores and they are spaced apart and closer to the sides. Should I lap the block maybe?

[Mickey Padge]

Anyone know where to buy a Gigabyte GA-EP45-UD3P now? It seems like a sweet board for my Q9650, maybe the best s775 intel board, but I can't find any....

Any help would be greatly appreciated!

[In-Fluence]

Temps seem to have gone down enough, and I think it was just the ridiculous ambeint temps I was suffering the other day. Now back to 36,35,36,36 idle now, and even tackling 500x9 again at long last. Mosfets are getting mighty hot though.

[NoGuru]

Anyone know where to buy a Gigabyte GA-EP45-UD3P now? It seems like a sweet board for my Q9650, maybe the best s775 intel board, but I can't find any....

Any help would be greatly appreciated!

Just got to check Ebay and for sale sections.

[unclewebb]

I thought I knew an Ebay seller with some new UD3P boards in stock but it looks like they are all gone now.

[radaja]

i just got one

[DTR]

I thought I knew an Ebay seller with some new UD3P boards in stock but it looks like they are all gone now.

This is the only place you can get one (they have two (2) left last I checked).

http://infonec.com/site/main.php?mod...tail&id=441153

It must be late as I can't understand why I'm giving up my stash...LOL

[kagula323]

i just got one

nice radaja ... I see u were missing 775 platform fun
what cpu are u going to use with it?

[radaja]

not sure yet.i have a pentium D 530 3.0Ghz HT to use until i find
what i want to use with it.i also have a kit of cellshocks too.

[Mickey Padge]

Thanks guys, however all the ebay sales and websites only offer USA shipping, it seems there are none of these boards in the EU

[Eeky NoX]

I gat one if you're able to fix it ...I keep it in the box since I burned the mosfet on those first noob SS's sessions
Well I would be very happy to see that board runing again... miss you :/

[andressergio]

not sure yet.i have a pentium D 530 3.0Ghz HT to use until i find
what i want to use with it.i also have a kit of cellshocks too.

Great Rob nice to see ya back on 775 i'll be playing with the Stalents 2200 CL8 hypers soon

Joind da club again

[radaja]

cant wait to see what the ST's will do on the USB3P

[Hondacity]

i tried my elpidas on the usb3p...it was a frustrating oc....but yeah i'm with you guys...i'll clock my usb3 and st's and an e8600

max was 5.5ghz....mch maxV applied was 1.7v with very tight screws on the nb ..LOL

lga775 ------------ForTheClassicWin

[Mickey Padge]

I gat one if you're able to fix it ...I keep it in the box since I burned the mosfet on those first noob SS's sessions
Well I would be very happy to see that board runing again... miss you :/

Hehe, thanks, but I would prefer one that posts, I am picky about things like that

[In-Fluence]

I'm getting to like this board now, definitely a worthy successor to my UD3P. Shot below shows 518x8.5 small FFT stable, not at 525 and just passed 8k. If I can make it to 530 I'll be proper chuffed! 4.5GHz at 8.5 and great bandwidth too, particularly considering this is at PL10

[radaja]

Hehe, thanks, but I would prefer one that posts, I am picky about things like that

i got mine for $40 because they said it might not work,they didnt have the time to mess with it.
it seems to work for me now so i kind of scored.but it was a gamble

[SUBOBO]

In-Fluence @ your signature : Gigabyte EP45-Extreme w/vdroop mod...
Are there any ways to mod vdrop with Gigabyte EP45-UD3P
I need your recommence.

[andressergio]

I'm getting to like this board now, definitely a worthy successor to my UD3P. Shot below shows 518x8.5 small FFT stable, not at 525 and just passed 8k. If I can make it to 530 I'll be proper chuffed! 4.5GHz at 8.5 and great bandwidth too, particularly considering this is at PL10

nice Influence you r punishing that MCH lol i took more juice on bandw on the ECOS at 4500 1600 CL7 PL7 at MCH 1,52

Cheers
Sergio

[andressergio]

cant wait to see what the ST's will do on the USB3P

argggg dont tell that word wait radaja i always have to

[andressergio]

In-Fluence @ your signature : Gigabyte EP45-Extreme w/vdroop mod...
Are there any ways to mod vdrop with Gigabyte EP45-UD3P
I need your recommence.

why sow high PLL mate