Page 3 of 21 FirstFirst 12345613 ... LastLast
Results 51 to 75 of 506

Thread: ***Official*** eVGA Classified SR-2 Thread

  1. #51
    Xtreme Mentor
    Join Date
    Apr 2004
    Location
    CT, USA!!!
    Posts
    2,821
    Quote Originally Posted by Sam_oslo View Post
    Yeah, the unlocked Uncore it really important. It will make a BIG difference.

    I only need a BCLK220+ confirmation for 24/7 stability, and the rest will rock, for sure.
    Just found out can only adjust on A0/A1 and B1 chips, sucks it won't work on our B0's.

  2. #52
    Xtreme Mentor
    Join Date
    Jan 2009
    Location
    Oslo - Norway
    Posts
    2,879
    Quote Originally Posted by xs2008 View Post
    This looks good but it is just a prototype. When are they going to get the finger out and release this?. This also mean SR-2 is not going to fit in HAF X, apparently.

    Quote Originally Posted by =[PULSAR]= View Post
    Just found out can only adjust on A0/A1 and B1 chips, sucks it won't work on our B0's.
    Yeah I've heard the same a couple of days ago, no unlocking on B0 yet.
    I got B1, tho

    ASUS P8P67 Deluxe (BIOS 1305)
    2600K @4.5GHz 1.27v , 1 hour Prime
    Silver Arrow , push/pull
    2x2GB Crucial 1066MHz CL7 ECC @1600MHz CL9 1.51v
    GTX560 GB OC @910/2400 0.987v
    Crucial C300 v006 64GB OS-disk + F3 1TB + 400MB RAMDisk
    CM Storm Scout + Corsair HX 1000W
    +
    EVGA SR-2 , A50
    2 x Xeon X5650 @3.86GHz(203x19) 1.20v
    Megahalem + Silver Arrow , push/pull
    3x2GB Corsair XMS3 1600 CL7 + 3x4GB G.SKILL Trident 1600 CL7 = 18GB @1624 7-8-7-20 1.65v
    XFX GTX 295 @650/1200/1402
    Crucial C300 v006 64GB OS-disk + F3 1TB + 2GB RAMDisk
    SilverStone Fortress FT01 + Corsair AX 1200W

  3. #53
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    a few benches from a few days ago...

    vantage with physx...
    http://img.techpowerup.org/100524/Capture075.jpg

    vantage without physx...
    http://img.techpowerup.org/100524/Capture076.jpg

    wprime 32m...
    http://img.techpowerup.org/100519/Capture058.jpg

    and some "official" things...

    vantage run on HWbot...
    http://hwbot.org/community/submissio...80_40648_marks

    cpuz valid on hwbot...
    http://hwbot.org/community/submissio...x5677_4606_mhz

  4. #54

  5. #55
    Registered User
    Join Date
    Jun 2005
    Posts
    8
    According to the specs, it only supports 4x16 and if you have more than 4 PCIe cards then it drops to 6x8 + 1x16. Kinda disappointing since Gigabyte's GA-X58A-UD9 can do 4x16 + 3x8 (using the X58 instead of the 5520, which are pretty much identical in terms of PCIe and both have 2x nF200). Wonder why eVGA doesn't allow a similar configuration since I am interested in more than 4 PCIe cards (such as sound card, which only requires a x1 slot but I'd rather not have it drop the dual GPUs to x8). Also, there are 12x DIMM slots with maximum memory capacity at 48GB. How is this limit actually derived from? I don't suppose anyone has 8GB sticks to test on this (and theoretically filling up to 96GB max). Anyone have any insight on these issues?
    Last edited by sgogeta4; 05-31-2010 at 05:44 PM.

  6. #56
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682

  7. #57
    Xtreme X.I.P.
    Join Date
    Jan 2003
    Location
    Huntsville, AL
    Posts
    5,603
    Quote Originally Posted by Fitseries3 View Post
    Very nice

    I'm assuming that you can OC both processors independently? different multi's? same BClk?
    24/7 Work & Play Rig
    Gigabyte X58A-UD5, i7 920 @ 4.56ghz 1.48v 21x217, G.Skill PI 12Gb 8-8-8-24-1T 1.56V @ 1736Mhz
    EK Supreme HF P1, Dual EK DCP 4.0 Pumps and EK Res, XSPC RX360 & RX240 w/ 1850rpm GT's
    Sapphire HD 4870 1Gb @ 810/1020mhz, 2x Dell 2407, 2x 1Tb WD Black SATA3, 2x 2Tb Hitachi 7k2000
    Cooler Master ATCS 840, Corsair 750TX PSU, running OSX 10.6.3 & Win 7 64

  8. #58

  9. #59
    Xtreme Addict
    Join Date
    Jul 2007
    Location
    Arizona - USA
    Posts
    2,200
    Nice thread PULSAR, keep those pics coming.
    //RETIRED-o00o--°(_)°--o00o-OVERCLOCKER//


  10. #60
    Xtreme Cruncher
    Join Date
    Jun 2008
    Location
    pacific NW usa
    Posts
    2,764
    Fitseries3,thats a very nice chip you got there
    _________________________________________________
    ............................ImAcOmPuTeRsPoNgE............................
    [SIGPIC][/SIGPIC]

    MY HEATWARE 76-0-0

  11. #61
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    2 chips actually.

    and thanks.

    not bad for water

  12. #62
    Xtreme Mentor
    Join Date
    Apr 2004
    Location
    CT, USA!!!
    Posts
    2,821
    Wish I had mine up and running already I just want to do it right.

  13. #63
    Dave's Mentor!
    Join Date
    May 2007
    Location
    montreal
    Posts
    5,247
    does the board support 2 980x cpus?

    maximus IV extreme gtx580
    gigabut p67-ud7
    p67 sabertooth
    2500k+2600k
    antec 1200watt
    EVGA classified 760
    920 Batch# 3849B018 4.985ghz@1.52v gtx285 ftw sli
    OCZ3RPR1866LV6GK hypers
    dfi ut p35 rampage extreme
    gigabut p35c-ds3r bios suks
    gigabut x38-d6q dead thank god
    ballistix 8500 1240mhz@2.02v

  14. #64
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    Quote Originally Posted by zsamz_ View Post
    does the board support 2 980x cpus?
    no... dual qpi xeons only.

  15. #65
    Xtreme Cruncher
    Join Date
    Jun 2008
    Location
    pacific NW usa
    Posts
    2,764
    Quote Originally Posted by Fitseries3 View Post
    2 chips actually.

    and thanks.

    not bad for water
    yea i got that since we in the SR-2 thread.i guess i should have said very nice chipS you got there
    _________________________________________________
    ............................ImAcOmPuTeRsPoNgE............................
    [SIGPIC][/SIGPIC]

    MY HEATWARE 76-0-0

  16. #66
    Xtreme Memory Hoarder
    Join Date
    Mar 2010
    Posts
    2,661
    Quote Originally Posted by =[PULSAR]= View Post
    Just found out can only adjust on A0/A1 and B1 chips, sucks it won't work on our B0's.
    Are you sure about that? That sucks if that is true as I have a B0 ES and I have the option of grabbing another one for cheap, but now I will have to rethink that one.
    Quote Originally Posted by Hondacity View Post
    gskillllin it!

  17. #67
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    i can confirm. B0 has locked uncore

    if i could trade my B0s for B1s i'd be all over that.

  18. #68
    Xtreme Mentor
    Join Date
    Apr 2004
    Location
    CT, USA!!!
    Posts
    2,821
    UPDATE

    A45 BIOS

    The following has been updated in A45:

    * Improves Graphics Card Compatibility

  19. #69
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    seems to have also fixed slow boot issues i was having.

  20. #70
    Registered User
    Join Date
    Jun 2005
    Posts
    8
    Quote Originally Posted by sgogeta4 View Post
    According to the specs, it only supports 4x16 and if you have more than 4 PCIe cards then it drops to 6x8 + 1x16. Kinda disappointing since Gigabyte's GA-X58A-UD9 can do 4x16 + 3x8 (using the X58 instead of the 5520, which are pretty much identical in terms of PCIe and both have 2x nF200). Wonder why eVGA doesn't allow a similar configuration since I am interested in more than 4 PCIe cards (such as sound card, which only requires a x1 slot but I'd rather not have it drop the dual GPUs to x8). Also, there are 12x DIMM slots with maximum memory capacity at 48GB. How is this limit actually derived from? I don't suppose anyone has 8GB sticks to test on this (and theoretically filling up to 96GB max). Anyone have any insight on these issues?
    *bump* Has anyone tried more than 4 PCIe cards? Does it automatically switch to x8 lanes? I'm hoping a BIOS update will be available to make this board comparable to the Gigabyte one in terms of GPU capabilities. I mean if someone is gonna put in $5000+, you want the best of the best right? I doubt anyone's gonna be wasting money to test out the 48GB capacity though if anyone has 8GB sticks, I would definitely be interested in knowing if those work without any issues.

  21. #71
    Registered User
    Join Date
    Jun 2009
    Posts
    72
    i think you misunderstand how the ud9 works. its the same.

  22. #72
    Xtreme Mentor
    Join Date
    Apr 2004
    Location
    CT, USA!!!
    Posts
    2,821
    Quote Originally Posted by sgogeta4 View Post
    *bump* Has anyone tried more than 4 PCIe cards? Does it automatically switch to x8 lanes? I'm hoping a BIOS update will be available to make this board comparable to the Gigabyte one in terms of GPU capabilities. I mean if someone is gonna put in $5000+, you want the best of the best right? I doubt anyone's gonna be wasting money to test out the 48GB capacity though if anyone has 8GB sticks, I would definitely be interested in knowing if those work without any issues.
    Why would you need more than 4 slots with 16x lanes?

  23. #73
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    7 8800gt's for folding or multi monitor setups.

  24. #74
    Xtreme Mentor
    Join Date
    Apr 2004
    Location
    CT, USA!!!
    Posts
    2,821
    Quote Originally Posted by Fitseries3 View Post
    7 8800gt's for folding or multi monitor setups.
    It's been tested before numerous times that when folding their is no difference between 16x and 8x.

  25. #75
    Xtreme PITA to MM
    Join Date
    Nov 2007
    Location
    ATX
    Posts
    682
    correct and thats why none of us understand the complaining.

Page 3 of 21 FirstFirst 12345613 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •