***Asus Rampage III Extreme Owners Thread***

[KaRLiToS]

hey guys, I'm back with my problems...

I tried:
- to put a second CPU 8 pin power connector and it didnt work
- Tried to lower the uncore clock
- Tried To lower QPI Link to slow mode, doesnt Help
- Add Vcore or QPI/Dram

Vcore and QPI calibration Enabled

So you think that if I lower my IOH voltage it might work? I'll have a second HD 5850 in a Week, putting more IOH (around 1.3-1.35v) voltage is suppose to work fine with Crossfire ???

[zsamz_]

U can try less IOH voltage - aroud 1.15v and increese CPU PLLv a notch and definetly bump up QPIv. In my case 1.3v is far not eanough. I run my mems at speed of 1700 9-9-9-24 and cpu 21x214 1.42v QPI 1.4v

I had the same BSOD for a while, canne mind how i fixed that but im sure by decrising some V =]

increese CPU PLLv a notch
and you dont need tha much qpi to run so lose
dont give advice if you dont know what you doing this is not ocn


KARLITO reduce cpu pll to 1.78

[Major]

hey guys, I'm back with my problems...

I tried:
- to put a second CPU 8 pin power connector and it didnt work
- Tried to lower the uncore clock
- Tried To lower QPI Link to slow mode, doesnt Help
- Add Vcore or QPI/Dram

Vcore and QPI calibration Enabled

So you think that if I lower my IOH voltage it might work? I'll have a second HD 5850 in a Week, putting more IOH (around 1.3-1.35v) voltage is suppose to work fine with Crossfire ???

Maybe you just have a trashed install of windows?

It may be painfull but have you tried to start from scratch with a clean install? Install while your computer is NOT overclocked, all default settings.

[KaRLiToS]

I had a Q9650 and GA-Ep45-UD3P previously on the same OS, I had to buy another CD key because of too heavy hardware change
But at 4.3 Ghz its running fine, (linx Stable) 24/7

[needforspeed]

I just noticed this CPU ratio Adjuster in Turbo V...

Has it always been there ??.. I must be going senile

[DBoone]

I don't see it on mine.

[KaRLiToS]

Me neither...

[needforspeed]

Maybe only shows up for unlocked multipliers only..

[ToMeGuN]

Maybe only shows up for unlocked multipliers only..

that is exactly what it is.

[eva2000]

I just noticed this CPU ratio Adjuster in Turbo V...

Has it always been there ??.. I must be going senile

unlocked cpus only

[zsamz_]

i picked up 3 of these should be unlocked

[Splave]

ouch they all F's?

[zsamz_]

ouch they all F's?

nope i keepin 1
i havent had the time to even open a box
had to buy 3 to get a good price
some lucky bugger gettin one in express shipped tomorow
i'll put mine in as soon as i get the time to put heatkiller in

[turtletrax]

ouch they all F's?

Havent been keeping up on the 980, do the F batch suck?

nope i keepin 1
i havent had the time to even open a box
had to buy 3 to get a good price
some lucky bugger gettin one in express shipped tomorow
i'll put mine in as soon as i get the time to put heatkiller in

Dibs on the other!! LOL

Im startin to think yous the HW pipeline in Canada

[kill_a_wat]

i picked up 3 of these should be unlocked

Hmm let us know how these clock I have access to 3005F729 but was hesitant to try it out

[zsamz_]

Dibs on the other!! LOL

Im startin to think yous the HW pipeline in Canada

its yours bud

[zsamz_]

Hmm let us know how these clock I have access to 3005F729 but was hesitant to try it out

i was told 1.37 for 4.6 on classy with ht batch 3085f729
turtletax got mine so i gotta score another one tomorow
i'll try to confirm we shall see what radaja can do with one soon

[kill_a_wat]

You mean 3005F729 right? As per your pic, unless I cant read anymore :

[zsamz_]

You mean 3005F729 right? As per your pic, unless I cant read anymore :

the pic is the pic
why is yours bad?

[kill_a_wat]

Oh no. Just dont have one anymore as someone offered me retail price for it so I sold it. Alot of people have 3003B fever lol

[Splave]

3003B ftw

I think people look into batch numbers way too much though.

[paill]

3003B is good

[Brama]

Hello,
this morning I tested the BT function to connect a smart phone to the motherboard and read/set some overclock parameters.

It works like a charm but BT protocol doesn't request any pairing, so anyone can access my mobo if I have the BT button on the rear of the case switched ON.

Someone was able to set a custom PIN and enable the pairing between phone and mobo BT?

[Splave]

beautiful chip paill 53k is great! what vtt you at 1.5?

[bito]

paill/Slave....as you both have rev.2.xx boards, could you just check the silkscreening above the 1st ram slot and see if that says rev 1.04G or something else.
Also, what does the little sticker under the ATX connector say....something like A01 or A02.

Maybe this can identify Rev. 2.xx boards or do ALL boards show Rev 2.xx in cpu-z ?

Many thanks