Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
Me and elmor tested this during the weekend. CPU is still alive and well![]()
Still playing with 1C/1T through windows with hyper pi having 6C/12T enabled. At the moment not an issue.
This is insane. Could this be a design problem of the processor?
Or a bios fix could solve the problem? Not just deactivating the option of using one or more cores through system bios.
Intel should respond immediately, we're talking about a processor that costs a 1.000 euros. That kind of products shouldn't be affected that easy.![]()
Intel Core i7 980X @ 4.53 GHz 6C-12T / Gigabyte GA-EX58-UD4P / CORSAIR CMG6GX3M3A1866C7 / Ati Radeon Sapphire 5870 1GB DDR5 / CORSAIR CMFSSD-128GBG2D / LG CH08LS10 / Creative X-FI Titanium Fatality /Corsair CMPSU-850HXEU PSU (850W) / Silverstone Temjin SST-TJ07B Case / SAMSUNG SYNCMASTER P2350
Watercool HK CPU LGA1366 Rev. 3.0 LT / DD-CPX-Pro 12V Pump / Swiftech MCR320 360mm / EK-Multioption RES 250 Rev.2 - EK-ANTI-Cyclone / Scythe S-FLEX Fan SFF21G.
ENZOTECH SCW1 vs APOGEE GT
I couldn't get my 980X ES to post with just one or even two cores enabled on Asus P6T DLX V1 and 2104 BIOS and always had to reset the CMOS after that. I guess i'm lucky i didn't kill the chip... I'd prolly spend the next few days wondering what the hell happened.
2600k @ 5.0Ghz 1.54V, Giga Z68, Zotac GTX680 AMP!, Patriot 1066Mhz 8GB RAM, Custom water, Silverstone 1000W, HAF932
Bookmarks