Orange Crush @ murderMod

[Wezly]

I like the tubes the way they are with your signature "X" in the middle. They are in no way messy, and add an 80's-sci-fi-industrial look that drew me to watercooling

But you built it, and I'm sure I'll like it either way. Just remember, no compromise.

[ipuoL]

Thank you Wezly!

The last days where horror days for me. The first is that the EK AGB was leaking but i flipped the plexi tube and now it works.



The next prob was the graphic card. I wanted to install the system yesterday evening but the card didn't work. Today i found out that i put the screws too close and i had to loose the srews a little bit at the backplate and now it works fine and temperatures are ok. 32° at 900/1200MHz

[josk1]

that's the hardway about watercooling...
got myself a full load of water on the graphic card once.... like a mini-lake
was lucky on this one 'coz after a little bit of hair-dryer everything worked fine again!

oh, nice rig by the way
at last somebody with an original color scheme!!!!

[SovietKitsch]

I too had the exact problem with the res. Odd trickle, and I had to flip the tube. I'm glad you caught it in time, wicked mod!

[Eniigmaa]

how did you install the barb on the middle white plate ?

[ipuoL]

that's the hardway about watercooling...
got myself a full load of water on the graphic card once.... like a mini-lake
was lucky on this one 'coz after a little bit of hair-dryer everything worked fine again!

oh, nice rig by the way
at last somebody with an original color scheme!!!!

I too had the exact problem with the res. Odd trickle, and I had to flip the tube. I'm glad you caught it in time, wicked mod!

Thank you mates! Yes, i flipped the Tube too and it work find now^^ It is really good to see that everything work. Thank you for such nice compliments.

how did you install the barb on the middle white plate ?

Hi Eniigmaa, i put it in the G 1/4 Thread which was cut in the plate.



The project will go on slowly now, because i have to pay a lot of taxes for studying and living in another town and such things. So sleeving and finding the perfect orange will go on after my summer holiday

The Headspreaders of the Dominators are at the anodize crew for getting them Orange without a thick layer about the spreaders.

To Do:
- sleeving
- powder coating
- illumination of the watercooling parts and the two little windows
- new fans
- and i know there will be more but i don't know it yet

[ipuoL]

For now i have some new shots with the new tubing.










this photo is not so good, but shows the "X" for proXi i build with the tubes and yes the right tube is a little bit too long^^

[Church]

Hmm. Black case insides behind res makes coolant in it too dark. How about some light behind it?

[ipuoL]

you are right and it will be realized some posts above i wrote, that all water cooling parts will be illuminated

[kwscore]

Love that Orange Color

Looks awesome

[ipuoL]

Today a package of my inhabitant and me arrived and we got our anodized parts... all i can say is holy **** this looks perfect.

At first a picture of the parts of my colleague:



]and now my parts





now look at the assembled heatspreaders... crazy^^











Sry for the red looking sleeve, but it is out of the cam^^
there will be illuminated pictures in some minutes

[josk1]

this is outstanding man!!!!! wow!!!!
i love the idea of the RAM cooler specific color!!!!!
where did u get that done?

[ipuoL]

i got it from this german shop

--> Link

[Senater_Cache]

It's really nice!
Why not use orange colored tubing with clear water?
put something painted with your orange behind the reservoir to help the color of it??

looks great!

[ipuoL]

I hate colored tubes^^but i found an orange which looks near perfect. The only orange fluid i knwo which don't use UV particles :

[Wezly]

That's wonderful sir!

Bravo!

[imersa]

that fluid does look impressive. One of the few Orange coloured builds I actually like! Keep it up.

[y0gi]

Just spent the last hour going over this build. It somehow skipped by me. Love the paint job/color and seems to really come alive under uv lights. So clean as well. Love it.

[mariop]

I hate colored tubes^^but i found an orange which looks near perfect. The only orange fluid i knwo which don't use UV particles :

Orange Juice?

Really nice build man! Those anodized heatsinks are killer!

keep the good work!

[csq2]

IMO UV orange looks better, but that's my opinion...

[ipuoL]

yeah but you mean your uv orange at your mainboard. But The UV particles in the fluid let the fluid illuminate yellow, so it is the wrong one either i don't want to use uv illumination.

For now the mod is finished and the next mod will stand in the first steps, but it won't be a water cooled one, so i will post it in another thread
Here you have all of the most important pictures of the System HAVE FUN




some pictures of hardware i found in my galleries




final pictures





Big thanks goes to Charles, Nils, Benny, Jochen, who let me come back after some problems in private life and thanks to the others who helped me with their ideas and comments. Thanks Wezly

[h20xide]

how did i miss this!? insane

[WoodWorker420]

It turned out great. I love the anodized heat spreaders to match....its all in the little details here at XS. (Well the little details, and the big ones too! :p)
Great job!

[Zeus]

Orange is what i should have now! Can i borrow your case till World championship football is over?

I have a q: Do you have a pic of the backside of that bulgin powerswitch mounted? The original powerswitch is soldered onto a pcb, how did you mod it to get the bulgin switch to fit with the three leds still in place?

[ipuoL]

Thank you guys^^

@Zeus: i removed the pcb. Because i don't need the leds. The buldin switch hast one LED ring and thats enough for me. But some TJ07 modders drill their pcb to have enough space for the switch.