**Gigabyte GA-X58A-UD7 OC-Tips-Bios-Discussion Thread**

[Hok]

I have a 930 with 20x200 for 4Gz.

This is my LLC Load Line calibration mini experiment... anything under 1.28 for vcore CPUz reading will BSOD with LINX. btw LINX will say stopped unexpectedly (not enough memory?) with just 768 and the 10th run... I have 6 GB of ram...if i use the "ALL" setting LINX will BSOD on the 18th run with a 0x000007F error....

Level 1
________________________
Vcore = 1.293
VTT = 1.335

cpuZ = 1.26X Load and idle
Lixn Crashes
_________________________
Vcore = 1.300
VTT = 1.335

CPU z = 1.28 Idle
CPU z = 1.26 Load
Prime95 is ok for 10 mins
Lixn crashes
_________________________
Vcore = 1.2875
VTT = 1.335

CPU z = 1.264 Idle
CPU z = 1.248 Load

==========================
Level 2
_________________________
Vcore = 1.2875
VTT = 1.335

CPU z = 1.264 Idle
CPU z = 1.264 Load
__________________________
Vcore = 1.3000
VTT = 1.335

CPU z = 1.2875 Idle
CPU z = 1.296 Load

This is what i wanted... but common where is the logic... please help.