Asus M3A79-T Deluxe

[p4spooky]

Good News:

1. loaded the new BIOS without issues. Did a full CMOS clear, battery out blah blah....
2. My 1090T is properly recognized and runs at default with no issues (8GB GSkill DDR2 2.0v - works fine in dual channel)

Bad News:

1. No overclocking is possible. The bios completely ignores the CPU multiplier setting. For example: setting the multiplier to 20, the board still boots at 3.2 (default)
2. Raising the bus to 250, multiplier to 16 - no boot.

VERY disappointed.

Need a new BIOS ASAP.